diff mbox series

[U-Boot,6/7] db410: added pinctrl node and serial bindings

Message ID 20180512101558.24375-7-ramon.fried@gmail.com
State Superseded
Delegated to: Tom Rini
Headers show
Series *** Qualcomm Snapdraon serial fixes*** | expand

Commit Message

Ramon Fried May 12, 2018, 10:15 a.m. UTC 
Added TLMM pinctrl node for pin muxing & config.
Additionally, added a serial node for uart.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
---
 arch/arm/dts/dragonboard410c.dts | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

Comments

Simon Glass May 13, 2018, 10 p.m. UTC | #1 
On 12 May 2018 at 20:15, Ramon Fried <ramon.fried@gmail.com> wrote:
> Added TLMM pinctrl node for pin muxing & config.
> Additionally, added a serial node for uart.
>
> Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
> ---
>  arch/arm/dts/dragonboard410c.dts | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
>

Reviewed-by: Simon Glass <sjg@chromium.org>
diff mbox series

Patch

diff --git a/arch/arm/dts/dragonboard410c.dts b/arch/arm/dts/dragonboard410c.dts
index d9d5831f4f..182a865b0a 100644
--- a/arch/arm/dts/dragonboard410c.dts
+++ b/arch/arm/dts/dragonboard410c.dts
@@ -8,6 +8,7 @@ 
 /dts-v1/;
 
 #include "skeleton64.dtsi"
+#include <dt-bindings/pinctrl/pinctrl-snapdragon.h>
 
 / {
 	model = "Qualcomm Technologies, Inc. Dragonboard 410c";
@@ -38,6 +39,17 @@ 
 		ranges = <0x0 0x0 0x0 0xffffffff>;
 		compatible = "simple-bus";
 
+		pinctrl: qcom,tlmm@1000000 {
+			compatible = "qcom,tlmm-apq8016";
+			reg = <0x1000000 0x400000>;
+
+			blsp1_uart: uart {
+				function = "blsp1_uart";
+				pins = "GPIO_4", "GPIO_5";
+				drive-strength = <DRIVE_STRENGTH_8MA>;
+				bias-disable;
+			};
+		};
 		clkc: qcom,gcc@1800000 {
 			compatible = "qcom,gcc-apq8016";
 			reg = <0x1800000 0x80000>;
@@ -49,6 +61,8 @@ 
 			compatible = "qcom,msm-uartdm-v1.4";
 			reg = <0x78b0000 0x200>;
 			clock = <&clkc 4>;
+			pinctrl-names = "uart";
+			pinctrl-0 = <&blsp1_uart>;
 		};
 
 		soc_gpios: pinctrl@1000000 {