From patchwork Fri Dec 29 16:37:31 2017 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Derald D. Woods" X-Patchwork-Id: 853954 X-Patchwork-Delegate: trini@ti.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=lists.denx.de (client-ip=81.169.180.215; helo=lists.denx.de; envelope-from=u-boot-bounces@lists.denx.de; receiver=) Authentication-Results: ozlabs.org; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=gmail.com header.i=@gmail.com header.b="ONy76Eza"; dkim-atps=neutral Received: from lists.denx.de (dione.denx.de [81.169.180.215]) by ozlabs.org (Postfix) with ESMTP id 3z7XNN3gbNz9s1h for ; Sat, 30 Dec 2017 03:39:00 +1100 (AEDT) Received: by lists.denx.de (Postfix, from userid 105) id 24CB5C21DAB; Fri, 29 Dec 2017 16:38:27 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on lists.denx.de X-Spam-Level: X-Spam-Status: No, score=-0.0 required=5.0 tests=FREEMAIL_FROM, RCVD_IN_DNSWL_BLOCKED, RCVD_IN_MSPIKE_H3, RCVD_IN_MSPIKE_WL, T_DKIM_INVALID autolearn=unavailable autolearn_force=no version=3.4.0 Received: from lists.denx.de (localhost [IPv6:::1]) by lists.denx.de (Postfix) with ESMTP id D34D2C21D56; Fri, 29 Dec 2017 16:38:20 +0000 (UTC) Received: by lists.denx.de (Postfix, from userid 105) id 636E8C21DCE; Fri, 29 Dec 2017 16:38:08 +0000 (UTC) Received: from mail-it0-f68.google.com (mail-it0-f68.google.com [209.85.214.68]) by lists.denx.de (Postfix) with ESMTPS id B6E2AC21C34 for ; Fri, 29 Dec 2017 16:38:02 +0000 (UTC) Received: by mail-it0-f68.google.com with SMTP id c16so7368871itc.5 for ; Fri, 29 Dec 2017 08:38:02 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=HiydC9E/37/JVsrtNorH+E4trCRHJ+18Yh5z22bkjDg=; b=ONy76Eza8YrrKjZvrqH2BxzBnfketgOhz1G4urAR49iqYJ9O7poJo9SnFBoTVSWYno xtTZk+QbBs1p/wTacNjlFvtMbqDXUsBvRgA7mvRxPs8IuFuZzc/DFBVN8H5mS1+FwQwz n9sXDLBSODCb8I39+WwcdwwNzbH10V0IV1CP5RzoLNP6Nk63Ctj3N9H65tnsqEGTcD2Q N+/pBBXJ3AlsT+RoCJ9THqKw1k3A+lYroWR7+Uk1lUNn1WFuntHv+Gh7BApS7RNUQMgc UETNEc8tYr7a74GGmgirmnz5ps3t5MGbJXm/ORZ4SmxNby+6JYljHgm67dAEyGTA5tXS M4fg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=HiydC9E/37/JVsrtNorH+E4trCRHJ+18Yh5z22bkjDg=; b=l5pvJB4JZiwP2DaYiT/hilhy1x8GYCJRZNiBRKWf8v32pJRPZCy4W9hO6NYxGRma3Z 2qfnEOfQBomWOEDRN0zGhnQVFWODFeEwKsKWpe71Vb8xZl57viwOK+91E/zaSmYRCTfv pSnSY7iqOI6UBfS69G4LuFm29CBBHTxL/AFXQ2dSipJnsTQK7H5UScaJ9rfrb9WYBB50 iteKlJViBj3rTHa9JT3a/6rIMSLlhD8fYSSgUopC+w2QSYZeBgJTMvoy6RqAM6At2ZID EGybqetag286Y2FUP1lI8u5k3lMDk6aCK1GGqAuCkVaRLXXu2awFZM7Nb90bdRILvQ3U gu4A== X-Gm-Message-State: AKGB3mLpElvR4+Ri3B1g1/eI4CRxeLg2GhHcAgxw7AyqMordbefGbnA3 bW1vlvAmic0A/Lz5utokYrq6Vw== X-Google-Smtp-Source: ACJfBou5aCyKkyukRZl8oW31DyjG4UygDCKRlKCLvhh5Hutclof4wDss3QM1ILAjniS/exNxcX4Msg== X-Received: by 10.36.207.196 with SMTP id y187mr44064450itf.123.1514565480829; Fri, 29 Dec 2017 08:38:00 -0800 (PST) Received: from ethiopia.woodsts.org (c-73-74-196-48.hsd1.il.comcast.net. [73.74.196.48]) by smtp.gmail.com with ESMTPSA id v65sm13118335itb.30.2017.12.29.08.38.00 (version=TLS1_2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Fri, 29 Dec 2017 08:38:00 -0800 (PST) From: "Derald D. Woods" To: u-boot@lists.denx.de Date: Fri, 29 Dec 2017 10:37:31 -0600 Message-Id: <20171229163732.14756-2-woods.technical@gmail.com> X-Mailer: git-send-email 2.15.1 In-Reply-To: <20171229163732.14756-1-woods.technical@gmail.com> References: <20171229163732.14756-1-woods.technical@gmail.com> Cc: trini@konsulko.com Subject: [U-Boot] [PATCH 1/2] ARM: dts: omap3-beagle{-xm}: Add support for BeagleBoard X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.18 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" This commit adds OMAP3 BeagleBoard devicetree files from Linux v4.15-rc5. This includes standard OMAP34XX board revisions as well as the 'xM' which is OMAP36XX. Signed-off-by: Derald D. Woods --- arch/arm/dts/Makefile | 5 + arch/arm/dts/omap3-beagle-u-boot.dtsi | 29 ++ arch/arm/dts/omap3-beagle-xm-ab-u-boot.dtsi | 29 ++ arch/arm/dts/omap3-beagle-xm-ab.dts | 16 + arch/arm/dts/omap3-beagle-xm-u-boot.dtsi | 29 ++ arch/arm/dts/omap3-beagle-xm.dts | 409 ++++++++++++++++++++++++++ arch/arm/dts/omap3-beagle.dts | 436 ++++++++++++++++++++++++++++ 7 files changed, 953 insertions(+) create mode 100644 arch/arm/dts/omap3-beagle-u-boot.dtsi create mode 100644 arch/arm/dts/omap3-beagle-xm-ab-u-boot.dtsi create mode 100644 arch/arm/dts/omap3-beagle-xm-ab.dts create mode 100644 arch/arm/dts/omap3-beagle-xm-u-boot.dtsi create mode 100644 arch/arm/dts/omap3-beagle-xm.dts create mode 100644 arch/arm/dts/omap3-beagle.dts diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index a895c70284..7cf6ef8bc4 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -438,6 +438,11 @@ dtb-$(CONFIG_TARGET_OMAP3_EVM) += \ omap3-evm-37xx.dtb \ omap3-evm.dtb +dtb-$(CONFIG_TARGET_OMAP3_BEAGLE) += \ + omap3-beagle-xm-ab.dtb \ + omap3-beagle-xm.dtb \ + omap3-beagle.dtb + dtb-$(CONFIG_TARGET_SAMA5D2_PTC_EK) += \ at91-sama5d2_ptc_ek.dtb diff --git a/arch/arm/dts/omap3-beagle-u-boot.dtsi b/arch/arm/dts/omap3-beagle-u-boot.dtsi new file mode 100644 index 0000000000..5325f0ffa4 --- /dev/null +++ b/arch/arm/dts/omap3-beagle-u-boot.dtsi @@ -0,0 +1,29 @@ +/* + * U-Boot additions + * + * (C) Copyright 2017 Derald D. Woods + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/ { + chosen { + stdout-path = &uart3; + }; +}; + +&mmc1 { + cd-inverted; +}; + +&uart1 { + reg-shift = <2>; +}; + +&uart2 { + reg-shift = <2>; +}; + +&uart3 { + reg-shift = <2>; +}; diff --git a/arch/arm/dts/omap3-beagle-xm-ab-u-boot.dtsi b/arch/arm/dts/omap3-beagle-xm-ab-u-boot.dtsi new file mode 100644 index 0000000000..5325f0ffa4 --- /dev/null +++ b/arch/arm/dts/omap3-beagle-xm-ab-u-boot.dtsi @@ -0,0 +1,29 @@ +/* + * U-Boot additions + * + * (C) Copyright 2017 Derald D. Woods + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/ { + chosen { + stdout-path = &uart3; + }; +}; + +&mmc1 { + cd-inverted; +}; + +&uart1 { + reg-shift = <2>; +}; + +&uart2 { + reg-shift = <2>; +}; + +&uart3 { + reg-shift = <2>; +}; diff --git a/arch/arm/dts/omap3-beagle-xm-ab.dts b/arch/arm/dts/omap3-beagle-xm-ab.dts new file mode 100644 index 0000000000..7ac3bcf59d --- /dev/null +++ b/arch/arm/dts/omap3-beagle-xm-ab.dts @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-beagle-xm.dts" + +/ { + /* HS USB Port 2 Power enable was inverted with the xM C */ + hsusb2_power: hsusb2_power_reg { + enable-active-high; + }; +}; diff --git a/arch/arm/dts/omap3-beagle-xm-u-boot.dtsi b/arch/arm/dts/omap3-beagle-xm-u-boot.dtsi new file mode 100644 index 0000000000..5325f0ffa4 --- /dev/null +++ b/arch/arm/dts/omap3-beagle-xm-u-boot.dtsi @@ -0,0 +1,29 @@ +/* + * U-Boot additions + * + * (C) Copyright 2017 Derald D. Woods + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/ { + chosen { + stdout-path = &uart3; + }; +}; + +&mmc1 { + cd-inverted; +}; + +&uart1 { + reg-shift = <2>; +}; + +&uart2 { + reg-shift = <2>; +}; + +&uart3 { + reg-shift = <2>; +}; diff --git a/arch/arm/dts/omap3-beagle-xm.dts b/arch/arm/dts/omap3-beagle-xm.dts new file mode 100644 index 0000000000..0349fcc9dc --- /dev/null +++ b/arch/arm/dts/omap3-beagle-xm.dts @@ -0,0 +1,409 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap36xx.dtsi" + +/ { + model = "TI OMAP3 BeagleBoard xM"; + compatible = "ti,omap3-beagle-xm", "ti,omap36xx", "ti,omap3"; + + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; + + aliases { + display0 = &dvi0; + display1 = &tv0; + ethernet = ðernet; + }; + + leds { + compatible = "gpio-leds"; + + heartbeat { + label = "beagleboard::usr0"; + gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */ + linux,default-trigger = "heartbeat"; + }; + + mmc { + label = "beagleboard::usr1"; + gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */ + linux,default-trigger = "mmc0"; + }; + }; + + pwmleds { + compatible = "pwm-leds"; + + pmu_stat { + label = "beagleboard::pmu_stat"; + pwms = <&twl_pwmled 1 7812500>; + max-brightness = <127>; + }; + }; + + sound { + compatible = "ti,omap-twl4030"; + ti,model = "omap3beagle"; + + ti,mcbsp = <&mcbsp2>; + }; + + gpio_keys { + compatible = "gpio-keys"; + + user { + label = "user"; + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + linux,code = <0x114>; + wakeup-source; + }; + + }; + + /* HS USB Port 2 Power */ + hsusb2_power: hsusb2_power_reg { + compatible = "regulator-fixed"; + regulator-name = "hsusb2_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; /* GPIO LEDA */ + startup-delay-us = <70000>; + }; + + /* HS USB Host PHY on PORT 2 */ + hsusb2_phy: hsusb2_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */ + vcc-supply = <&hsusb2_power>; + #phy-cells = <0>; + }; + + tfp410: encoder0 { + compatible = "ti,tfp410"; + powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>; + + /* XXX pinctrl from twl */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tfp410_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + + port@1 { + reg = <1>; + + tfp410_out: endpoint { + remote-endpoint = <&dvi_connector_in>; + }; + }; + }; + }; + + dvi0: connector0 { + compatible = "dvi-connector"; + label = "dvi"; + + digital; + + ddc-i2c-bus = <&i2c3>; + + port { + dvi_connector_in: endpoint { + remote-endpoint = <&tfp410_out>; + }; + }; + }; + + tv0: connector1 { + compatible = "svideo-connector"; + label = "tv"; + + port { + tv_connector_in: endpoint { + remote-endpoint = <&venc_out>; + }; + }; + }; + + etb@5401b000 { + compatible = "arm,coresight-etb10", "arm,primecell"; + reg = <0x5401b000 0x1000>; + + clocks = <&emu_src_ck>; + clock-names = "apb_pclk"; + port { + etb_in: endpoint { + slave-mode; + remote-endpoint = <&etm_out>; + }; + }; + }; + + etm@54010000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x54010000 0x1000>; + + clocks = <&emu_src_ck>; + clock-names = "apb_pclk"; + port { + etm_out: endpoint { + remote-endpoint = <&etb_in>; + }; + }; + }; +}; + +&omap3_pmx_wkup { + gpio1_pins: pinmux_gpio1_pins { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a0e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot2.gpio_4 */ + >; + }; + + dss_dpi_pins2: pinmux_dss_dpi_pins1 { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a0a, PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */ + OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */ + OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */ + OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */ + OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */ + OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */ + >; + }; +}; + +&omap3_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &hsusb2_pins + >; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */ + >; + }; + + hsusb2_pins: pinmux_hsusb2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */ + OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */ + OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */ + OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */ + OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */ + OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */ + >; + }; + + dss_dpi_pins1: pinmux_dss_dpi_pins2 { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3) /* dss_data18.dss_data0 */ + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3) /* dss_data19.dss_data1 */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3) /* dss_data20.dss_data2 */ + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3) /* dss_data21.dss_data3 */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3) /* dss_data22.dss_data4 */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3) /* dss_data23.dss_data5 */ + >; + }; +}; + +&omap3_pmx_core2 { + pinctrl-names = "default"; + pinctrl-0 = < + &hsusb2_2_pins + >; + + hsusb2_2_pins: pinmux_hsusb2_2_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ + OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ + OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ + OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ + OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ + OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ + >; + }; +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + + twl_audio: audio { + compatible = "ti,twl4030-audio"; + codec { + }; + }; + + twl_power: power { + compatible = "ti,twl4030-power-beagleboard-xm", "ti,twl4030-power-idle-osc-off"; + ti,use_poweroff; + }; + }; +}; + +#include "twl4030.dtsi" +#include "twl4030_omap3.dtsi" + +&i2c2 { + clock-frequency = <400000>; +}; + +&i2c3 { + clock-frequency = <100000>; +}; + +&mmc1 { + vmmc-supply = <&vmmc1>; + vqmmc-supply = <&vsim>; + bus-width = <8>; +}; + +&mmc2 { + status = "disabled"; +}; + +&mmc3 { + status = "disabled"; +}; + +&twl_gpio { + ti,use-leds; + /* pullups: BIT(1) */ + ti,pullups = <0x000002>; + /* + * pulldowns: + * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13) + * BIT(15), BIT(16), BIT(17) + */ + ti,pulldowns = <0x03a1c4>; +}; + +&usb_otg_hs { + interface-type = <0>; + usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; + mode = <3>; + power = <50>; +}; + +&uart3 { + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +}; + +&gpio1 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio1_pins>; +}; + +&usbhshost { + port2-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <0 &hsusb2_phy>; + + #address-cells = <1>; + #size-cells = <0>; + + hub@2 { + compatible = "usb424,9514"; + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet: usbether@1 { + compatible = "usb424,ec00"; + reg = <1>; + }; + }; +}; + +&vaux2 { + regulator-name = "usb_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mcbsp2 { + status = "okay"; +}; + +&dss { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = < + &dss_dpi_pins1 + &dss_dpi_pins2 + >; + + port { + dpi_out: endpoint { + remote-endpoint = <&tfp410_in>; + data-lines = <24>; + }; + }; +}; + +&venc { + status = "ok"; + + vdda-supply = <&vdac>; + + port { + venc_out: endpoint { + remote-endpoint = <&tv_connector_in>; + ti,channels = <2>; + }; + }; +}; diff --git a/arch/arm/dts/omap3-beagle.dts b/arch/arm/dts/omap3-beagle.dts new file mode 100644 index 0000000000..3ca8991a6c --- /dev/null +++ b/arch/arm/dts/omap3-beagle.dts @@ -0,0 +1,436 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap34xx.dtsi" + +/ { + model = "TI OMAP3 BeagleBoard"; + compatible = "ti,omap3-beagle", "ti,omap3"; + + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + aliases { + display0 = &dvi0; + display1 = &tv0; + }; + + leds { + compatible = "gpio-leds"; + pmu_stat { + label = "beagleboard::pmu_stat"; + gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */ + }; + + heartbeat { + label = "beagleboard::usr0"; + gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */ + linux,default-trigger = "heartbeat"; + }; + + mmc { + label = "beagleboard::usr1"; + gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */ + linux,default-trigger = "mmc0"; + }; + }; + + /* HS USB Port 2 Power */ + hsusb2_power: hsusb2_power_reg { + compatible = "regulator-fixed"; + regulator-name = "hsusb2_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; /* GPIO LEDA */ + startup-delay-us = <70000>; + }; + + /* HS USB Host PHY on PORT 2 */ + hsusb2_phy: hsusb2_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */ + vcc-supply = <&hsusb2_power>; + #phy-cells = <0>; + }; + + sound { + compatible = "ti,omap-twl4030"; + ti,model = "omap3beagle"; + + ti,mcbsp = <&mcbsp2>; + }; + + gpio_keys { + compatible = "gpio-keys"; + + user { + label = "user"; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + linux,code = <0x114>; + wakeup-source; + }; + + }; + + tfp410: encoder0 { + compatible = "ti,tfp410"; + powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */ + + pinctrl-names = "default"; + pinctrl-0 = <&tfp410_pins>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tfp410_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + + port@1 { + reg = <1>; + + tfp410_out: endpoint { + remote-endpoint = <&dvi_connector_in>; + }; + }; + }; + }; + + dvi0: connector0 { + compatible = "dvi-connector"; + label = "dvi"; + + digital; + + ddc-i2c-bus = <&i2c3>; + + port { + dvi_connector_in: endpoint { + remote-endpoint = <&tfp410_out>; + }; + }; + }; + + tv0: connector1 { + compatible = "svideo-connector"; + label = "tv"; + + port { + tv_connector_in: endpoint { + remote-endpoint = <&venc_out>; + }; + }; + }; + + etb@540000000 { + compatible = "arm,coresight-etb10", "arm,primecell"; + reg = <0x5401b000 0x1000>; + + clocks = <&emu_src_ck>; + clock-names = "apb_pclk"; + port { + etb_in: endpoint { + slave-mode; + remote-endpoint = <&etm_out>; + }; + }; + }; + + etm@54010000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x54010000 0x1000>; + + clocks = <&emu_src_ck>; + clock-names = "apb_pclk"; + port { + etm_out: endpoint { + remote-endpoint = <&etb_in>; + }; + }; + }; +}; + +&omap3_pmx_wkup { + gpio1_pins: pinmux_gpio1_pins { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */ + >; + }; +}; + +&omap3_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &hsusb2_pins + >; + + hsusb2_pins: pinmux_hsusb2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */ + OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */ + OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */ + OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */ + OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */ + OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ + >; + }; + + tfp410_pins: pinmux_tfp410_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */ + >; + }; + + dss_dpi_pins: pinmux_dss_dpi_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ + >; + }; +}; + +&omap3_pmx_core2 { + pinctrl-names = "default"; + pinctrl-0 = < + &hsusb2_2_pins + >; + + hsusb2_2_pins: pinmux_hsusb2_2_pins { + pinctrl-single,pins = < + OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ + OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ + OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ + OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ + OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ + OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ + >; + }; +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + + twl_audio: audio { + compatible = "ti,twl4030-audio"; + codec { + }; + }; + }; +}; + +#include "twl4030.dtsi" +#include "twl4030_omap3.dtsi" + +&i2c3 { + clock-frequency = <100000>; +}; + +&mmc1 { + vmmc-supply = <&vmmc1>; + vqmmc-supply = <&vsim>; + bus-width = <8>; +}; + +&mmc2 { + status = "disabled"; +}; + +&mmc3 { + status = "disabled"; +}; + +&usbhshost { + port2-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <0 &hsusb2_phy>; +}; + +&twl_gpio { + ti,use-leds; + /* pullups: BIT(1) */ + ti,pullups = <0x000002>; + /* + * pulldowns: + * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13) + * BIT(15), BIT(16), BIT(17) + */ + ti,pulldowns = <0x03a1c4>; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; +}; + +&gpio1 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio1_pins>; +}; + +&usb_otg_hs { + interface-type = <0>; + usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; + mode = <3>; + power = <50>; +}; + +&vaux2 { + regulator-name = "vdd_ehci"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mcbsp2 { + status = "okay"; +}; + +/* Needed to power the DPI pins */ +&vpll2 { + regulator-always-on; +}; + +&dss { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_dpi_pins>; + + port { + dpi_out: endpoint { + remote-endpoint = <&tfp410_in>; + data-lines = <24>; + }; + }; +}; + +&venc { + status = "ok"; + + vdda-supply = <&vdac>; + + port { + venc_out: endpoint { + remote-endpoint = <&tv_connector_in>; + ti,channels = <2>; + }; + }; +}; + +&gpmc { + status = "ok"; + ranges = <0 0 0x30000000 0x1000000>; /* CS0 space, 16MB */ + + /* Chip select 0 */ + nand@0,0 { + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* NAND I/O window, 4 bytes */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ + ti,nand-ecc-opt = "ham1"; + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ + nand-bus-width = <16>; + #address-cells = <1>; + #size-cells = <1>; + + gpmc,device-width = <2>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <36>; + gpmc,cs-wr-off-ns = <36>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <24>; + gpmc,adv-wr-off-ns = <36>; + gpmc,oe-on-ns = <6>; + gpmc,oe-off-ns = <48>; + gpmc,we-on-ns = <6>; + gpmc,we-off-ns = <30>; + gpmc,rd-cycle-ns = <72>; + gpmc,wr-cycle-ns = <72>; + gpmc,access-ns = <54>; + gpmc,wr-access-ns = <30>; + + partition@0 { + label = "X-Loader"; + reg = <0 0x80000>; + }; + partition@80000 { + label = "U-Boot"; + reg = <0x80000 0x1e0000>; + }; + partition@1c0000 { + label = "U-Boot Env"; + reg = <0x260000 0x20000>; + }; + partition@280000 { + label = "Kernel"; + reg = <0x280000 0x400000>; + }; + partition@780000 { + label = "Filesystem"; + reg = <0x680000 0xf980000>; + }; + }; +};