Message ID | 20171205060007.11647-1-wens@csie.org |
---|---|
State | Accepted |
Commit | 6af1a2eeee8b4eb50ea5f66c512c945927539975 |
Delegated to: | Jagannadha Sutradharudu Teki |
Headers | show |
Series | [U-Boot] sunxi: Fix UART console index for A33-OLinuXino | expand |
On Tue, Dec 05, 2017 at 02:00:07PM +0800, Chen-Yu Tsai wrote: > The A33-OLinuXino defconfig was using the default CONS_INDEX value for > A33, which actually points to the R_UART, which is routed to the GPIO > header without proper pull-ups or diodes. The board has a separate > header for UART0, which are routed to pins PB0 and PB1. This header > is properly marked and is likely the first pins any user would try > to get a console. > > Fix CONS_INDEX in the defconfig so the console appears on UART0. > > Fixes: ca5c37026be4 ("sunxi: Add support for A33-OLinuXino board") > Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Maxime
On Tue, Dec 5, 2017 at 3:11 PM, Maxime Ripard <maxime.ripard@free-electrons.com> wrote: > On Tue, Dec 05, 2017 at 02:00:07PM +0800, Chen-Yu Tsai wrote: >> The A33-OLinuXino defconfig was using the default CONS_INDEX value for >> A33, which actually points to the R_UART, which is routed to the GPIO >> header without proper pull-ups or diodes. The board has a separate >> header for UART0, which are routed to pins PB0 and PB1. This header >> is properly marked and is likely the first pins any user would try >> to get a console. >> >> Fix CONS_INDEX in the defconfig so the console appears on UART0. >> >> Fixes: ca5c37026be4 ("sunxi: Add support for A33-OLinuXino board") >> Signed-off-by: Chen-Yu Tsai <wens@csie.org> > > Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Applied to u-boot-sunxi/master
diff --git a/configs/A33-OLinuXino_defconfig b/configs/A33-OLinuXino_defconfig index c11991de7e5a..894bb19cf0bd 100644 --- a/configs/A33-OLinuXino_defconfig +++ b/configs/A33-OLinuXino_defconfig @@ -1,5 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y +CONFIG_CONS_INDEX=1 CONFIG_MACH_SUN8I_A33=y CONFIG_DRAM_CLK=432 CONFIG_DRAM_ZQ=15291
The A33-OLinuXino defconfig was using the default CONS_INDEX value for A33, which actually points to the R_UART, which is routed to the GPIO header without proper pull-ups or diodes. The board has a separate header for UART0, which are routed to pins PB0 and PB1. This header is properly marked and is likely the first pins any user would try to get a console. Fix CONS_INDEX in the defconfig so the console appears on UART0. Fixes: ca5c37026be4 ("sunxi: Add support for A33-OLinuXino board") Signed-off-by: Chen-Yu Tsai <wens@csie.org> --- configs/A33-OLinuXino_defconfig | 1 + 1 file changed, 1 insertion(+)