Message ID | 20151221232438.1735961201@mail.nwl.cc |
---|---|
State | Superseded |
Delegated to: | Prafulla Wadaskar |
Headers | show |
On 22.12.2015 00:25, Phil Sutter wrote: > * There is no boards.cfg anymore, so drop (1). > * Creating flash.c and u-boot.lds seems not mandatory as well. > * Adjusting the enumerators for the above implicitly fixed for > double items numbered (3). > > Signed-off-by: Phil Sutter <phil@nwl.cc> > --- > README | 11 ++++------- > 1 file changed, 4 insertions(+), 7 deletions(-) > > diff --git a/README b/README > index 4fee706..dcc9478 100644 > --- a/README > +++ b/README > @@ -5153,14 +5153,11 @@ If the system board that you have is not listed, then you will need > to port U-Boot to your hardware platform. To do this, follow these > steps: > > -1. Add a new configuration option for your board to the toplevel > - "boards.cfg" file, using the existing entries as examples. > - Follow the instructions there to keep the boards in order. > -2. Create a new directory to hold your board specific code. Add any > +1. Create a new directory to hold your board specific code. Add any > files you need. In your board directory, you will need at least > - the "Makefile", a "<board>.c", "flash.c" and "u-boot.lds". > -3. Create a new configuration file "include/configs/<board>.h" for > - your board > + the "Makefile" and a "<board>.c". > +2. Create a new configuration file "include/configs/<board>.h" for > + your board. > 3. If you're porting U-Boot to a new CPU, then also create a new > directory to hold your CPU specific code. Add any files you need. > 4. Run "make <board>_defconfig" with your new name. > Seems this documentation is really outdated and needs some further adjustments. But still, this is definitely the right direction, so: Reviewed-by: Stefan Roese <sr@denx.de> Thanks, Stefan
diff --git a/README b/README index 4fee706..dcc9478 100644 --- a/README +++ b/README @@ -5153,14 +5153,11 @@ If the system board that you have is not listed, then you will need to port U-Boot to your hardware platform. To do this, follow these steps: -1. Add a new configuration option for your board to the toplevel - "boards.cfg" file, using the existing entries as examples. - Follow the instructions there to keep the boards in order. -2. Create a new directory to hold your board specific code. Add any +1. Create a new directory to hold your board specific code. Add any files you need. In your board directory, you will need at least - the "Makefile", a "<board>.c", "flash.c" and "u-boot.lds". -3. Create a new configuration file "include/configs/<board>.h" for - your board + the "Makefile" and a "<board>.c". +2. Create a new configuration file "include/configs/<board>.h" for + your board. 3. If you're porting U-Boot to a new CPU, then also create a new directory to hold your CPU specific code. Add any files you need. 4. Run "make <board>_defconfig" with your new name.
* There is no boards.cfg anymore, so drop (1). * Creating flash.c and u-boot.lds seems not mandatory as well. * Adjusting the enumerators for the above implicitly fixed for double items numbered (3). Signed-off-by: Phil Sutter <phil@nwl.cc> --- README | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-)