@@ -128,7 +128,6 @@
/* NAND flash */
#ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_MAX_CHIPS 1
#define CONFIG_NAND_ATMEL
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
@@ -90,7 +90,6 @@
#define CONFIG_SYS_NAND_BASE_LIST { 0x02000000, }
/* socket has two chipselects, nCE0 gated by address BIT(14) */
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_MAX_CHIPS 1
/* SPI support */
#define CONFIG_SPI
@@ -69,7 +69,6 @@
#define CONFIG_SYS_NAND_BASE_LIST { 0x02000000, }
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_MAX_CHIPS 1
/* U-Boot command configuration */
#include <config_cmd_default.h>
@@ -270,7 +270,6 @@
/* NAND */
-#define CONFIG_SYS_NAND_MAX_CHIPS 1
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x40000000
#define CONFIG_SYS_NAND_DBW_8 1
@@ -115,7 +115,6 @@
#define CONFIG_SYS_ALE_MASK 0x8
#undef CONFIG_SYS_NAND_HW_ECC
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
-#define NAND_MAX_CHIPS 1
#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=davinci_nand.1"
#define MTDPARTS_DEFAULT \
@@ -253,7 +253,6 @@
/* NAND flash */
#ifdef CONFIG_CMD_NAND
#define CONFIG_NAND_ATMEL
-#define CONFIG_SYS_NAND_MAX_CHIPS 1
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x40000000
#define CONFIG_SYS_NAND_DBW_8 1
@@ -115,7 +115,6 @@
/* NAND flash */
#ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_MAX_CHIPS 1
#define CONFIG_NAND_ATMEL
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x40000000
@@ -231,7 +231,6 @@
#define CONFIG_NAND_MXC
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_MAX_CHIPS 1
/*
* actually this is nothing someone wants to configure!
NAND_MAX_CHIPS has been replaced by CONFIG_SYS_NAND_MAX_CHIPS, and the latter defaults to 1. Signed-off-by: Scott Wood <scottwood@freescale.com> --- include/configs/at91sam9m10g45ek.h | 1 - include/configs/cam_enc_4xx.h | 1 - include/configs/davinci_dm355leopard.h | 1 - include/configs/eb_cpux9k2.h | 1 - include/configs/enbw_cmc.h | 1 - include/configs/pm9263.h | 1 - include/configs/pm9g45.h | 1 - include/configs/tt01.h | 1 - 8 files changed, 0 insertions(+), 8 deletions(-)