diff mbox

[U-Boot,6/6] mx35: Use default pin initializers

Message ID 1618865585.2410693.1344973225610.JavaMail.root@advansee.com
State Rejected
Delegated to: Stefano Babic
Headers show

Commit Message

Benoît Thébaudeau Aug. 14, 2012, 7:40 p.m. UTC 
Use the newly created mx35 default pin initialization functions in mx35 board
files.

Note that this disables the init of i2c1 pins on flea3 because i2c1 is not
enabled in flea3.h. This should not be an issue if the kernel sets up pins
properly.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
---
 .../board/CarMediaLab/flea3/flea3.c                |   57 +++---------
 .../board/freescale/mx35pdk/mx35pdk.c              |   96 +-------------------
 2 files changed, 14 insertions(+), 139 deletions(-)
diff mbox

Patch

diff --git u-boot-4d3c95f.orig/board/CarMediaLab/flea3/flea3.c u-boot-4d3c95f/board/CarMediaLab/flea3/flea3.c
index 5015a1a..54bc513 100644
--- u-boot-4d3c95f.orig/board/CarMediaLab/flea3/flea3.c
+++ u-boot-4d3c95f/board/CarMediaLab/flea3/flea3.c
@@ -169,60 +169,20 @@  static void setup_iomux_uart3(void)
 	mxc_request_iomux(MX35_PIN_CTS2, MUX_CONFIG_ALT7);
 }
 
-static void setup_iomux_i2c(void)
+static void setup_iomux_i2c3(void)
 {
 	int pad;
 
-	mxc_request_iomux(MX35_PIN_I2C1_CLK, MUX_CONFIG_SION);
-	mxc_request_iomux(MX35_PIN_I2C1_DAT, MUX_CONFIG_SION);
+	mxc_request_iomux(MX35_PIN_TX3_RX2, MUX_CONFIG_ALT1);
+	mxc_request_iomux(MX35_PIN_TX2_RX3, MUX_CONFIG_ALT1);
 
 	pad = (PAD_CTL_HYS_SCHMITZ | PAD_CTL_PKE_ENABLE \
 			| PAD_CTL_PUE_PUD | PAD_CTL_ODE_OpenDrain);
 
-	mxc_iomux_set_pad(MX35_PIN_I2C1_CLK, pad);
-	mxc_iomux_set_pad(MX35_PIN_I2C1_DAT, pad);
-
-	mxc_request_iomux(MX35_PIN_TX3_RX2, MUX_CONFIG_ALT1);
-	mxc_request_iomux(MX35_PIN_TX2_RX3, MUX_CONFIG_ALT1);
-
 	mxc_iomux_set_pad(MX35_PIN_TX3_RX2, pad);
 	mxc_iomux_set_pad(MX35_PIN_TX2_RX3, pad);
 }
 
-
-static void setup_iomux_spi(void)
-{
-	mxc_request_iomux(MX35_PIN_CSPI1_MOSI, MUX_CONFIG_SION);
-	mxc_request_iomux(MX35_PIN_CSPI1_MISO, MUX_CONFIG_SION);
-	mxc_request_iomux(MX35_PIN_CSPI1_SS0, MUX_CONFIG_SION);
-	mxc_request_iomux(MX35_PIN_CSPI1_SS1, MUX_CONFIG_SION);
-	mxc_request_iomux(MX35_PIN_CSPI1_SCLK, MUX_CONFIG_SION);
-}
-
-static void setup_iomux_fec(void)
-{
-	/* setup pins for FEC */
-	mxc_request_iomux(MX35_PIN_FEC_TX_CLK, MUX_CONFIG_FUNC);
-	mxc_request_iomux(MX35_PIN_FEC_RX_CLK, MUX_CONFIG_FUNC);
-	mxc_request_iomux(MX35_PIN_FEC_RX_DV, MUX_CONFIG_FUNC);
-	mxc_request_iomux(MX35_PIN_FEC_COL, MUX_CONFIG_FUNC);
-	mxc_request_iomux(MX35_PIN_FEC_RDATA0, MUX_CONFIG_FUNC);
-	mxc_request_iomux(MX35_PIN_FEC_TDATA0, MUX_CONFIG_FUNC);
-	mxc_request_iomux(MX35_PIN_FEC_TX_EN, MUX_CONFIG_FUNC);
-	mxc_request_iomux(MX35_PIN_FEC_MDC, MUX_CONFIG_FUNC);
-	mxc_request_iomux(MX35_PIN_FEC_MDIO, MUX_CONFIG_FUNC);
-	mxc_request_iomux(MX35_PIN_FEC_TX_ERR, MUX_CONFIG_FUNC);
-	mxc_request_iomux(MX35_PIN_FEC_RX_ERR, MUX_CONFIG_FUNC);
-	mxc_request_iomux(MX35_PIN_FEC_CRS, MUX_CONFIG_FUNC);
-	mxc_request_iomux(MX35_PIN_FEC_RDATA1, MUX_CONFIG_FUNC);
-	mxc_request_iomux(MX35_PIN_FEC_TDATA1, MUX_CONFIG_FUNC);
-	mxc_request_iomux(MX35_PIN_FEC_RDATA2, MUX_CONFIG_FUNC);
-	mxc_request_iomux(MX35_PIN_FEC_TDATA2, MUX_CONFIG_FUNC);
-	mxc_request_iomux(MX35_PIN_FEC_RDATA3, MUX_CONFIG_FUNC);
-	mxc_request_iomux(MX35_PIN_FEC_TDATA3, MUX_CONFIG_FUNC);
-
-}
-
 int board_early_init_f(void)
 {
 	struct ccm_regs *ccm =
@@ -266,9 +226,14 @@  int board_early_init_f(void)
 
 	/* Set pinmux for the required peripherals */
 	setup_iomux_uart3();
-	setup_iomux_i2c();
-	setup_iomux_fec();
-	setup_iomux_spi();
+#ifdef CONFIG_I2C_MXC
+#if CONFIG_SYS_I2C_BASE == I2C1_BASE_ADDR
+	mx35_i2c1_init_pins();
+#endif
+#endif
+	setup_iomux_i2c3();
+	mx35_fec_init_pins();
+	mx35_cspi1_init_pins();
 
 	return 0;
 }
diff --git u-boot-4d3c95f.orig/board/freescale/mx35pdk/mx35pdk.c u-boot-4d3c95f/board/freescale/mx35pdk/mx35pdk.c
index bc415b8..bdfdf32 100644
--- u-boot-4d3c95f.orig/board/freescale/mx35pdk/mx35pdk.c
+++ u-boot-4d3c95f/board/freescale/mx35pdk/mx35pdk.c
@@ -70,96 +70,6 @@  void dram_init_banksize(void)
 	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
 }
 
-static void setup_iomux_i2c(void)
-{
-	int pad;
-
-	/* setup pins for I2C1 */
-	mxc_request_iomux(MX35_PIN_I2C1_CLK, MUX_CONFIG_SION);
-	mxc_request_iomux(MX35_PIN_I2C1_DAT, MUX_CONFIG_SION);
-
-	pad = (PAD_CTL_HYS_SCHMITZ | PAD_CTL_PKE_ENABLE \
-			| PAD_CTL_PUE_PUD | PAD_CTL_ODE_OpenDrain);
-
-	mxc_iomux_set_pad(MX35_PIN_I2C1_CLK, pad);
-	mxc_iomux_set_pad(MX35_PIN_I2C1_DAT, pad);
-}
-
-
-static void setup_iomux_spi(void)
-{
-	mxc_request_iomux(MX35_PIN_CSPI1_MOSI, MUX_CONFIG_SION);
-	mxc_request_iomux(MX35_PIN_CSPI1_MISO, MUX_CONFIG_SION);
-	mxc_request_iomux(MX35_PIN_CSPI1_SS0, MUX_CONFIG_SION);
-	mxc_request_iomux(MX35_PIN_CSPI1_SS1, MUX_CONFIG_SION);
-	mxc_request_iomux(MX35_PIN_CSPI1_SCLK, MUX_CONFIG_SION);
-}
-
-static void setup_iomux_fec(void)
-{
-	int pad;
-
-	/* setup pins for FEC */
-	mxc_request_iomux(MX35_PIN_FEC_TX_CLK, MUX_CONFIG_FUNC);
-	mxc_request_iomux(MX35_PIN_FEC_RX_CLK, MUX_CONFIG_FUNC);
-	mxc_request_iomux(MX35_PIN_FEC_RX_DV, MUX_CONFIG_FUNC);
-	mxc_request_iomux(MX35_PIN_FEC_COL, MUX_CONFIG_FUNC);
-	mxc_request_iomux(MX35_PIN_FEC_RDATA0, MUX_CONFIG_FUNC);
-	mxc_request_iomux(MX35_PIN_FEC_TDATA0, MUX_CONFIG_FUNC);
-	mxc_request_iomux(MX35_PIN_FEC_TX_EN, MUX_CONFIG_FUNC);
-	mxc_request_iomux(MX35_PIN_FEC_MDC, MUX_CONFIG_FUNC);
-	mxc_request_iomux(MX35_PIN_FEC_MDIO, MUX_CONFIG_FUNC);
-	mxc_request_iomux(MX35_PIN_FEC_TX_ERR, MUX_CONFIG_FUNC);
-	mxc_request_iomux(MX35_PIN_FEC_RX_ERR, MUX_CONFIG_FUNC);
-	mxc_request_iomux(MX35_PIN_FEC_CRS, MUX_CONFIG_FUNC);
-	mxc_request_iomux(MX35_PIN_FEC_RDATA1, MUX_CONFIG_FUNC);
-	mxc_request_iomux(MX35_PIN_FEC_TDATA1, MUX_CONFIG_FUNC);
-	mxc_request_iomux(MX35_PIN_FEC_RDATA2, MUX_CONFIG_FUNC);
-	mxc_request_iomux(MX35_PIN_FEC_TDATA2, MUX_CONFIG_FUNC);
-	mxc_request_iomux(MX35_PIN_FEC_RDATA3, MUX_CONFIG_FUNC);
-	mxc_request_iomux(MX35_PIN_FEC_TDATA3, MUX_CONFIG_FUNC);
-
-	pad = (PAD_CTL_DRV_3_3V | PAD_CTL_PUE_PUD | PAD_CTL_ODE_CMOS | \
-			PAD_CTL_DRV_NORMAL | PAD_CTL_SRE_SLOW);
-
-	mxc_iomux_set_pad(MX35_PIN_FEC_TX_CLK, pad | PAD_CTL_HYS_SCHMITZ | \
-			PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX35_PIN_FEC_RX_CLK, pad | PAD_CTL_HYS_SCHMITZ | \
-			PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX35_PIN_FEC_RX_DV, pad | PAD_CTL_HYS_SCHMITZ | \
-			 PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX35_PIN_FEC_COL, pad | PAD_CTL_HYS_SCHMITZ | \
-			  PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX35_PIN_FEC_RDATA0, pad | PAD_CTL_HYS_SCHMITZ | \
-			  PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX35_PIN_FEC_TDATA0, pad | PAD_CTL_HYS_CMOS | \
-			  PAD_CTL_PKE_NONE | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX35_PIN_FEC_TX_EN, pad | PAD_CTL_HYS_CMOS | \
-			  PAD_CTL_PKE_NONE | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX35_PIN_FEC_MDC, pad | PAD_CTL_HYS_CMOS | \
-			  PAD_CTL_PKE_NONE | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX35_PIN_FEC_MDIO, pad | PAD_CTL_HYS_SCHMITZ | \
-			  PAD_CTL_PKE_ENABLE | PAD_CTL_22K_PU);
-	mxc_iomux_set_pad(MX35_PIN_FEC_TX_ERR, pad | PAD_CTL_HYS_CMOS | \
-			  PAD_CTL_PKE_NONE | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX35_PIN_FEC_RX_ERR, pad | PAD_CTL_HYS_SCHMITZ | \
-			  PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX35_PIN_FEC_CRS, pad | PAD_CTL_HYS_SCHMITZ | \
-			  PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX35_PIN_FEC_RDATA1, pad | PAD_CTL_HYS_SCHMITZ | \
-			  PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX35_PIN_FEC_TDATA1, pad | PAD_CTL_HYS_CMOS | \
-			  PAD_CTL_PKE_NONE | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX35_PIN_FEC_RDATA2, pad | PAD_CTL_HYS_SCHMITZ | \
-			  PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX35_PIN_FEC_TDATA2, pad | PAD_CTL_HYS_CMOS | \
-			  PAD_CTL_PKE_NONE | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX35_PIN_FEC_RDATA3, pad | PAD_CTL_HYS_SCHMITZ | \
-			  PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX35_PIN_FEC_TDATA3, pad | PAD_CTL_HYS_CMOS | \
-			  PAD_CTL_PKE_NONE | PAD_CTL_100K_PD);
-}
-
 int board_early_init_f(void)
 {
 	struct ccm_regs *ccm =
@@ -185,9 +95,9 @@  int board_early_init_f(void)
 	/* Setup NAND */
 	__raw_writel(readl(&ccm->rcsr) | MXC_CCM_RCSR_NFC_FMS, &ccm->rcsr);
 
-	setup_iomux_i2c();
-	setup_iomux_fec();
-	setup_iomux_spi();
+	mx35_i2c1_init_pins();
+	mx35_fec_init_pins();
+	mx35_cspi1_init_pins();
 
 	return 0;
 }