diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index 650ac94..2b086da 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -170,6 +170,42 @@ config ARCH_LS2080A
 	imply DISTRO_DEFAULTS
 	imply PANIC_HANG
 
+config ARCH_LX2160A
+	bool
+	select ARMV8_SET_SMPEN
+	select FSL_LSCH3
+	select NXP_LSCH3_2
+	select SYS_HAS_SERDES
+	select SYS_FSL_SRDS_1
+	select SYS_FSL_SRDS_2
+	select SYS_NXP_SRDS_3
+	select SYS_FSL_DDR
+	select SYS_FSL_DDR_LE
+	select SYS_FSL_DDR_VER_50
+	select SYS_FSL_EC1
+	select SYS_FSL_EC2
+	select SYS_FSL_HAS_RGMII
+	select SYS_FSL_HAS_SEC
+	select SYS_FSL_HAS_CCN508
+	select SYS_FSL_HAS_DDR4
+	select SYS_FSL_SEC_COMPAT_5
+	select SYS_FSL_SEC_LE
+	select ARCH_EARLY_INIT_R
+	select BOARD_EARLY_INIT_F
+	select SYS_I2C_MXC
+	select SYS_I2C_MXC_I2C1
+	select SYS_I2C_MXC_I2C2
+	select SYS_I2C_MXC_I2C3
+	select SYS_I2C_MXC_I2C4
+	select SYS_I2C_MXC_I2C5
+	select SYS_I2C_MXC_I2C6
+	select SYS_I2C_MXC_I2C7
+	select SYS_I2C_MXC_I2C8
+	imply DISTRO_DEFAULTS
+	imply PANIC_HANG
+	imply SCSI
+	imply SCSI_AHCI
+
 config FSL_LSCH2
 	bool
 	select SYS_FSL_HAS_CCI400
@@ -185,7 +221,7 @@ config NXP_LSCH3_2
 
 config FSL_MC_ENET
 	bool "Management Complex network"
-	depends on ARCH_LS2080A || ARCH_LS1088A
+	depends on ARCH_LS2080A || ARCH_LS1088A || ARCH_LX2160A
 	default y
 	select RESV_RAM
 	help
@@ -202,6 +238,7 @@ config FSL_PCIE_COMPAT
 	default "fsl,ls1046a-pcie" if ARCH_LS1046A
 	default "fsl,ls2080a-pcie" if ARCH_LS2080A
 	default "fsl,ls1088a-pcie" if ARCH_LS1088A
+	default "fsl,lx2160a-pcie" if ARCH_LX2160A
 	help
 	  This compatible is used to find pci controller node in Kernel DT
 	  to complete fixup.
@@ -300,6 +337,7 @@ config MAX_CPUS
 	default 4 if ARCH_LS1046A
 	default 16 if ARCH_LS2080A
 	default 8 if ARCH_LS1088A
+	default 16 if ARCH_LX2160A
 	default 1
 	help
 	  Set this number to the maximum number of possible CPUs in the SoC.
@@ -342,6 +380,9 @@ config SYS_FSL_HAS_CCI400
 config SYS_FSL_HAS_CCN504
 	bool
 
+config SYS_FSL_HAS_CCN508
+	bool
+
 config SYS_FSL_HAS_DP_DDR
 	bool
 
@@ -404,6 +445,7 @@ config SYS_FSL_DSPI_CLK_DIV
 config SYS_FSL_DUART_CLK_DIV
 	int "DUART clock divider"
 	default 1 if ARCH_LS1043A
+	default 4 if ARCH_LX2160A
 	default 2
 	help
 	  This is the divider that is used to derive DUART clock from Platform
@@ -464,13 +506,15 @@ config RESV_RAM
 config SYS_FSL_EC1
 	bool
 	help
-	  Ethernet controller 1, this is connected to MAC3.
+	  Ethernet controller 1, this is connected to
+	  MAC17 for LX2160A or to MAC3 for other SoCs
 	  Provides DPAA2 capabilities
 
 config SYS_FSL_EC2
 	bool
 	help
-	  Ethernet controller 2, this is connected to MAC4.
+	  Ethernet controller 2, this is connected to
+	  MAC18 for LX2160A or to MAC4 for other SoCs
 	  Provides DPAA2 capabilities
 
 config SYS_FSL_ERRATUM_A008336
@@ -506,7 +550,7 @@ config SYS_FSL_HAS_RGMII
 config SYS_MC_RSV_MEM_ALIGN
 	hex "Management Complex reserved memory alignment"
 	depends on RESV_RAM
-	default 0x20000000 if ARCH_LS2080A || ARCH_LS1088A
+	default 0x20000000 if ARCH_LS2080A || ARCH_LS1088A || ARCH_LX2160A
 	help
 	  Reserved memory needs to be aligned for MC to use. Default value
 	  is 512MB.
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Makefile b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
index 91fdbad..e9bc987 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Makefile
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
@@ -1,5 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0+
-#
+# Copyright 2016-2018 NXP
 # Copyright 2014-2015, Freescale Semiconductor
 
 obj-y += cpu.o
@@ -22,6 +22,10 @@ obj-$(CONFIG_SYS_HAS_SERDES) += fsl_lsch2_serdes.o
 endif
 endif
 
+ifneq ($(CONFIG_ARCH_LX2160A),)
+obj-$(CONFIG_SYS_HAS_SERDES) += lx2160a_serdes.o
+endif
+
 ifneq ($(CONFIG_ARCH_LS2080A),)
 obj-$(CONFIG_SYS_HAS_SERDES) += ls2080a_serdes.o
 endif
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
index 60b0575..a35958a 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
@@ -60,6 +60,9 @@ static struct cpu_type cpu_type_list[] = {
 	CPU_TYPE_ENTRY(LS1084A, LS1084A, 8),
 	CPU_TYPE_ENTRY(LS1048A, LS1048A, 4),
 	CPU_TYPE_ENTRY(LS1044A, LS1044A, 4),
+	CPU_TYPE_ENTRY(LX2160A, LX2160A, 16),
+	CPU_TYPE_ENTRY(LX2120A, LX2120A, 12),
+	CPU_TYPE_ENTRY(LX2080A, LX2080A, 8),
 };
 
 #define EARLY_PGTABLE_SIZE 0x5000
@@ -246,7 +249,7 @@ static struct mm_region final_map[] = {
 	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
 	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
 	},
-#ifdef CONFIG_ARCH_LS2080A
+#if defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LX2160A)
 	{ CONFIG_SYS_PCIE4_PHYS_ADDR, CONFIG_SYS_PCIE4_PHYS_ADDR,
 	  CONFIG_SYS_PCIE4_PHYS_SIZE,
 	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
@@ -366,6 +369,10 @@ void cpu_name(char *name)
 	for (i = 0; i < ARRAY_SIZE(cpu_type_list); i++)
 		if ((cpu_type_list[i].soc_ver & SVR_WO_E) == ver) {
 			strcpy(name, cpu_type_list[i].name);
+#ifdef CONFIG_ARCH_LX2160A
+			if (IS_C_PROCESSOR(svr))
+				strcat(name, "C");
+#endif
 
 			if (IS_E_PROCESSOR(svr))
 				strcat(name, "E");
@@ -1165,10 +1172,16 @@ void __efi_runtime reset_cpu(ulong addr)
 {
 	u32 val;
 
+#ifdef CONFIG_ARCH_LX2160A
+	val = in_le32(rstcr);
+	val |= 0x01;
+	out_le32(rstcr, val);
+#else
 	/* Raise RESET_REQ_B */
 	val = scfg_in32(rstcr);
 	val |= 0x02;
 	scfg_out32(rstcr, val);
+#endif
 }
 
 #ifdef CONFIG_EFI_LOADER
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc
index 276ab90..a0e2621 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc
+++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc
@@ -7,6 +7,7 @@ SoC overview
 	5. LS1046A
 	6. LS2088A
 	7. LS2081A
+	8. LX2160A
 
 LS1043A
 ---------
@@ -271,3 +272,59 @@ Refer to LS2084A(LS2088A) section above for details.
 It has one more similar SoC personality
 1)LS2041A, few difference w.r.t. LS2081A:
        a) Four 64-bit ARM v8 Cortex-A72 CPUs
+
+LX2160A
+--------
+The QorIQ LX2160A processor is built in the 16FFC process on
+the Layerscape architecture combining sixteen ARM A72 processor
+cores with advanced, high-performance datapath acceleration and
+network, peripheral interfaces required for networking, wireless
+infrastructure, storage, and general-purpose embedded applications.
+
+LX2160A is compliant with the Layerscape Chassis Generation 3.2.
+
+The LX2160A SoC includes the following function and features:
+  Sixteen 32-bit / 64-bit ARM v8 A72 CPUs
+  Cache Coherent Interconnect Fabric (CCN508 aka “Eliot”)
+  Two 64-bit 3.2GT/s DDR4 SDRAM memory controllers with ECC.
+  Data path acceleration architecture (DPAA2)
+  24 Serdes lanes at up to 25 GHz
+  Ethernet interfaces
+  Single WRIOP tile supporting 130Gbps using 18 MACs
+  Support for 10G-SXGMII (aka USXGMII).
+  Support for SGMII (and 1000Base-KX)
+  Support for XFI (and 10GBase-KR)
+  Support for CAUI4 (100G); CAUI2 (50G) and 25G-AUI(25G).
+  Support for XLAUI (and 40GBase-KR4) for 40G.
+  Support for two RGMII parallel interfaces.
+  Energy efficient Ethernet support (802.3az)
+  IEEE 1588 support.
+  High-speed peripheral interfaces
+	Two PCIe Gen 4.0 8-lane controllers supporting SR-IOV,
+	Four PCIe Gen 4.0 4-lane controllers.
+	Four serial ATA (SATA 3.0) controllers.
+	Two USB 3.0 controllers with integrated PHY
+	Two Enhanced secure digital host controllers
+	Two Controller Area Network (CAN) modules
+	Flexible Serial peripheral interface (FlexSPI) controller.
+	Three Serial peripheral interface (SPI) controllers.
+	Eight I2C Controllers.
+	Four PL011 UARTs supporting two 4-pin UART ports or four 2-pin UART ports.
+	General Purpose IO (GPIO)
+  Support for hardware virtualization and partitioning (ARM MMU-500)
+  Support for GIC (ARM GIC-500)
+  QorIQ platform Trust Architecture 3.0
+  One Secure WatchDog timer and one Non-Secure Watchdog timer.
+  ARM Generic Timer
+  Two Flextimers
+  Debug supporting run control, data acquisition, high-speed trace,
+  performance/event monitoring
+  Thermal Monitor Unit (TMU) with +/- 2C accuracy
+  Support for Voltage ID (VID) for yield improvement
+
+LX2160A SoC has 2 more similar SoC personalities
+1)LX2120A, few difference w.r.t. LX2160A:
+       a) Twelve 64-bit ARM v8 Cortex-A72 CPUs
+
+2)LX2080A, few difference w.r.t. LX2160A:
+       a) Eight 64-bit ARM v8 Cortex-A72 CPUs
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c
index bb50e3d..ab1be3f 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c
@@ -22,9 +22,18 @@ static u8 serdes3_prtcl_map[SERDES_PRCTL_COUNT];
 #endif
 
 #if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
+#ifdef CONFIG_ARCH_LX2160A
+int xfi_dpmac[XFI14 + 1];
+int sgmii_dpmac[SGMII18 + 1];
+int a25gaui_dpmac[_25GE10 + 1];
+int xlaui_dpmac[_40GE2 + 1];
+int caui2_dpmac[_50GE2 + 1];
+int caui4_dpmac[_100GE2 + 1];
+#else
 int xfi_dpmac[XFI8 + 1];
 int sgmii_dpmac[SGMII16 + 1];
 #endif
+#endif
 
 __weak void wriop_init_dpmac_qsgmii(int sd, int lane_prtcl)
 {
@@ -146,6 +155,32 @@ void serdes_init(u32 sd, u32 sd_addr, u32 rcwsr, u32 sd_prctl_mask,
 		else {
 			serdes_prtcl_map[lane_prtcl] = 1;
 #if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
+#ifdef CONFIG_ARCH_LX2160A
+			if (lane_prtcl >= XFI1 && lane_prtcl <= XFI14)
+				wriop_init_dpmac(sd, xfi_dpmac[lane_prtcl],
+						 (int)lane_prtcl);
+
+			if (lane_prtcl >= SGMII1 && lane_prtcl <= SGMII18)
+				wriop_init_dpmac(sd, sgmii_dpmac[lane_prtcl],
+						 (int)lane_prtcl);
+
+			if (lane_prtcl >= _25GE1 && lane_prtcl <= _25GE10)
+				wriop_init_dpmac(sd, a25gaui_dpmac[lane_prtcl],
+						 (int)lane_prtcl);
+
+			if (lane_prtcl >= _40GE1 && lane_prtcl <= _40GE2)
+				wriop_init_dpmac(sd, xlaui_dpmac[lane_prtcl],
+						 (int)lane_prtcl);
+
+			if (lane_prtcl >= _50GE1 && lane_prtcl <= _50GE2)
+				wriop_init_dpmac(sd, caui2_dpmac[lane_prtcl],
+						 (int)lane_prtcl);
+
+			if (lane_prtcl >= _100GE1 && lane_prtcl <= _100GE2)
+				wriop_init_dpmac(sd, caui4_dpmac[lane_prtcl],
+						 (int)lane_prtcl);
+
+#else
 			switch (lane_prtcl) {
 			case QSGMII_A:
 			case QSGMII_B:
@@ -167,6 +202,7 @@ void serdes_init(u32 sd, u32 sd_addr, u32 rcwsr, u32 sd_prctl_mask,
 				break;
 			}
 #endif
+#endif
 		}
 	}
 
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
index cbc9112..6721a57 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
+++ b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
@@ -354,7 +354,7 @@ get_svr:
 	ret
 #endif
 
-#ifdef CONFIG_SYS_FSL_HAS_CCN504
+#if defined(CONFIG_SYS_FSL_HAS_CCN504) || defined(CONFIG_SYS_FSL_HAS_CCN508)
 hnf_pstate_poll:
 	/* x0 has the desired status, return 0 for success, 1 for timeout
 	 * clobber x1, x2, x3, x4, x6, x7
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/lx2160a_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/lx2160a_serdes.c
new file mode 100644
index 0000000..a04a370
--- /dev/null
+++ b/arch/arm/cpu/armv8/fsl-layerscape/lx2160a_serdes.c
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+#include <common.h>
+#include <asm/arch/fsl_serdes.h>
+
+struct serdes_config {
+	u8 protocol;
+	u8 lanes[SRDS_MAX_LANES];
+};
+
+static struct serdes_config serdes1_cfg_tbl[] = {
+	/* SerDes 1 */
+	{0x01, {PCIE2, PCIE2, PCIE2, PCIE2, PCIE1, PCIE1, PCIE1, PCIE1 } },
+	{0x02, {PCIE2, PCIE2, PCIE2, PCIE2, SGMII6, SGMII5, SGMII4, SGMII3 } },
+	{0x03, {PCIE2, PCIE2, PCIE2, PCIE2, XFI6, XFI5, XFI4,
+		XFI3 } },
+	{0x04, {SGMII10, SGMII9, SGMII8, SGMII7, SGMII6, SGMII5, SGMII4,
+		SGMII3 } },
+	{0x05, {XFI10, XFI9, XFI8, XFI7, PCIE1, PCIE1, PCIE1,
+		PCIE1 } },
+	{0x06, {SGMII10, SGMII9, SGMII8, SGMII7, SGMII6, SGMII5, XFI4,
+		XFI3 } },
+	{0x07, {SGMII10, SGMII9, SGMII8, SGMII7, XFI6, XFI5, XFI4,
+		XFI3 } },
+	{0x08, {XFI10, XFI9, XFI8, XFI7, XFI6, XFI5, XFI4, XFI3 } },
+	{0x09, {SGMII10, SGMII9, SGMII8, PCIE2, SGMII6, SGMII5, SGMII4,
+		PCIE1 } },
+	{0x0A, {XFI10, XFI9, XFI8, PCIE2, XFI6, XFI5, XFI4, PCIE1 } },
+	{0x0B, {SGMII10, SGMII9, PCIE2, PCIE2, SGMII6, SGMII5, PCIE1, PCIE1 } },
+	{0x0C, {SGMII10, SGMII9, PCIE2, PCIE2, PCIE1, PCIE1, PCIE1, PCIE1 } },
+	{0x0D, {_100GE2, _100GE2, _100GE2, _100GE2, _100GE1, _100GE1, _100GE1,
+		_100GE1 } },
+	{0x0E, {PCIE2, PCIE2, PCIE2, PCIE2, _100GE1, _100GE1, _100GE1,
+		_100GE1 } },
+	{0x0F, {PCIE2, PCIE2, PCIE2, PCIE2, _50GE2, _50GE2, _50GE1, _50GE1 } },
+	{0x10, {PCIE2, PCIE2, PCIE2, PCIE2, _25GE6, _25GE5, _50GE1, _50GE1 } },
+	{0x11, {PCIE2, PCIE2, PCIE2, PCIE2, _25GE6, _25GE5, _25GE4, _25GE3 } },
+	{0x12, {XFI10, XFI9, XFI8, XFI7, _25GE6, _25GE5, XFI4,
+		XFI3 } },
+	{0x13, {_40GE2, _40GE2, _40GE2, _40GE2, _25GE6, _25GE5, XFI4, XFI3 } },
+	{0x14, {_40GE2, _40GE2, _40GE2, _40GE2, _40GE1, _40GE1, _40GE1,
+		_40GE1 } },
+	{0x15, {_25GE10, _25GE9, PCIE2, PCIE2, _25GE6, _25GE5, _25GE4,
+		_25GE3 } },
+	{0x16, {XFI10, XFI9, PCIE2, PCIE2, XFI6, XFI5, XFI4, XFI3 } },
+	{}
+};
+
+static struct serdes_config serdes2_cfg_tbl[] = {
+	/* SerDes 2 */
+	{0x01, {PCIE3, PCIE3, SATA1, SATA2, PCIE4, PCIE4, PCIE4, PCIE4 } },
+	{0x02, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3 } },
+	{0x03, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, PCIE4, PCIE4 } },
+	{0x04, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, SATA1, SATA2 } },
+	{0x05, {PCIE3, PCIE3, PCIE3, PCIE3, SATA3, SATA4, SATA1, SATA2 } },
+	{0x06, {PCIE3, PCIE3, PCIE3, PCIE3, SGMII15, SGMII16, XFI13,
+		XFI14 } },
+	{0x07, {PCIE3, SGMII12, SGMII17, SGMII18, PCIE4, SGMII16, XFI13,
+		XFI14 } },
+	{0x08, {NONE, NONE, SATA1, SATA2, SATA3, SATA4, XFI13, XFI14 } },
+	{0x09, {SGMII11, SGMII12, SGMII17, SGMII18, SGMII15, SGMII16, SGMII13,
+		SGMII14} },
+	{0x0A, {SGMII11, SGMII12, SGMII17, SGMII18, PCIE4, PCIE4, PCIE4,
+		PCIE4 } },
+	{0x0B, {PCIE3, SGMII12, SGMII17, SGMII18, PCIE4, SGMII16, SGMII13,
+		SGMII14 } },
+	{0x0C, {SGMII11, SGMII12, SGMII17, SGMII18, PCIE4, PCIE4, SATA1,
+		SATA2 } },
+	{0x0D, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, SGMII13, SGMII14 } },
+	{0x0E, {PCIE3, PCIE3, SGMII17, SGMII18, PCIE4, PCIE4, SGMII13,
+		SGMII14 } },
+	{}
+};
+
+static struct serdes_config serdes3_cfg_tbl[] = {
+	/* SerDes 3 */
+	{0x02, {PCIE5, PCIE5, PCIE5, PCIE5, PCIE5, PCIE5, PCIE5, PCIE5 } },
+	{0x03, {PCIE5, PCIE5, PCIE5, PCIE5, PCIE6, PCIE6, PCIE6, PCIE6 } },
+	{}
+};
+
+static struct serdes_config *serdes_cfg_tbl[] = {
+	serdes1_cfg_tbl,
+	serdes2_cfg_tbl,
+	serdes3_cfg_tbl,
+};
+
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane)
+{
+	struct serdes_config *ptr;
+
+	if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+		return 0;
+
+	ptr = serdes_cfg_tbl[serdes];
+	while (ptr->protocol) {
+		if (ptr->protocol == cfg)
+			return ptr->lanes[lane];
+		ptr++;
+	}
+
+	return 0;
+}
+
+int is_serdes_prtcl_valid(int serdes, u32 prtcl)
+{
+	int i;
+	struct serdes_config *ptr;
+
+	if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+		return 0;
+
+	ptr = serdes_cfg_tbl[serdes];
+	while (ptr->protocol) {
+		if (ptr->protocol == prtcl)
+			break;
+		ptr++;
+	}
+
+	if (!ptr->protocol)
+		return 0;
+
+	for (i = 0; i < SRDS_MAX_LANES; i++) {
+		if (ptr->lanes[i] != NONE)
+			return 1;
+	}
+
+	return 0;
+}
diff --git a/arch/arm/dts/fsl-lx2160a.dtsi b/arch/arm/dts/fsl-lx2160a.dtsi
new file mode 100644
index 0000000..b407dc6
--- /dev/null
+++ b/arch/arm/dts/fsl-lx2160a.dtsi
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP lx2160a SOC common device tree source
+ *
+ * Copyright 2018 NXP
+ *
+ */
+
+/ {
+	compatible = "fsl,lx2160a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x80000000>;
+		      /* DRAM space - 1, size : 2 GB DRAM */
+	};
+
+	sysclk: sysclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "sysclk";
+	};
+
+	clockgen: clocking@1300000 {
+		compatible = "fsl,ls2080a-clockgen";
+		reg = <0 0x1300000 0 0xa0000>;
+		#clock-cells = <2>;
+		clocks = <&sysclk>;
+	};
+
+	gic: interrupt-controller@6000000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
+		      <0x0 0x06200000 0 0x100000>; /* GICR */
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <1 9 0x4>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */
+			     <1 14 0x8>, /* Physical NS PPI, active-low */
+			     <1 11 0x8>, /* Virtual PPI, active-low */
+			     <1 10 0x8>; /* Hypervisor PPI, active-low */
+	};
+
+	uart0: serial@21c0000 {
+		compatible = "arm,pl011";
+		reg = <0x0 0x21c0000 0x0 0x1000>;
+		clocks = <&clockgen 4 0>;
+	};
+
+	uart1: serial@21d0000 {
+		compatible = "arm,pl011";
+		reg = <0x0 0x21d0000 0x0 0x1000>;
+		clocks = <&clockgen 4 0>;
+	};
+
+	uart2: serial@21e0000 {
+		compatible = "arm,pl011";
+		reg = <0x0 0x21e0000 0x0 0x1000>;
+		clocks = <&clockgen 4 0>;
+		status = "disabled";
+	};
+
+	uart3: serial@21f0000 {
+		compatible = "arm,pl011";
+		reg = <0x0 0x21f0000 0x0 0x1000>;
+		clocks = <&clockgen 4 0>;
+		status = "disabled";
+	};
+
+	dspi0: dspi@2100000 {
+		compatible = "fsl,vf610-dspi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2100000 0x0 0x10000>;
+		interrupts = <0 26 0x4>; /* Level high type */
+		num-cs = <6>;
+	};
+
+	dspi1: dspi@2110000 {
+		compatible = "fsl,vf610-dspi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2110000 0x0 0x10000>;
+		interrupts = <0 240 0x4>; /* Level high type */
+		num-cs = <6>;
+	};
+
+	dspi2: dspi@2120000 {
+		compatible = "fsl,vf610-dspi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2120000 0x0 0x10000>;
+		interrupts = <0 241 0x4>; /* Level high type */
+		num-cs = <6>;
+	};
+
+	usb0: usb3@3100000 {
+		compatible = "fsl,layerscape-dwc3";
+		reg = <0x0 0x3100000 0x0 0x10000>;
+		interrupts = <0 80 0x4>; /* Level high type */
+		dr_mode = "host";
+	};
+
+	usb1: usb3@3110000 {
+		compatible = "fsl,layerscape-dwc3";
+		reg = <0x0 0x3110000 0x0 0x10000>;
+		interrupts = <0 81 0x4>; /* Level high type */
+		dr_mode = "host";
+	};
+};
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h
index bd4ca88..d4f80a2 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/config.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h
@@ -1,5 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
+ * Copyright 2016-2018 NXP
  * Copyright 2015, Freescale Semiconductor
  */
 
@@ -176,6 +177,61 @@
 #define SYS_FSL_OCRAM_SPACE_SIZE	0x00200000 /* 2M space */
 #define CONFIG_SYS_FSL_OCRAM_SIZE	0x00020000 /* Real size 128K */
 
+/* LX2160A Soc Support */
+#elif defined(CONFIG_ARCH_LX2160A)
+#define TZPC_BASE				0x02200000
+#define TZPCDECPROT_0_SET_BASE			(TZPC_BASE + 0x804)
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_EARLY_INIT
+#define SRDS_MAX_LANES  8
+#ifndef L1_CACHE_BYTES
+#define L1_CACHE_SHIFT		6
+#define L1_CACHE_BYTES		BIT(L1_CACHE_SHIFT)
+#endif
+#define CONFIG_SYS_FSL_CORES_PER_CLUSTER	2
+#define CONFIG_SYS_FSL_CLUSTER_CLOCKS		{ 1, 1, 1, 1, 4, 4, 4, 4 }
+#define CONFIG_SYS_FSL_NUM_CC_PLLS		4
+
+#define CONFIG_SYS_PAGE_SIZE			0x10000
+
+#define CONFIG_SYS_FSL_OCRAM_BASE		0x18000000 /* initial RAM */
+#define SYS_FSL_OCRAM_SPACE_SIZE		0x00200000 /* 2M space */
+#define CONFIG_SYS_FSL_OCRAM_SIZE		0x00040000 /* Real size 256K */
+
+/* DDR */
+#define CONFIG_SYS_DDR_BLOCK1_SIZE		((phys_size_t)2 << 30)
+#define CONFIG_MAX_MEM_MAPPED			CONFIG_SYS_DDR_BLOCK1_SIZE
+
+#define CONFIG_SYS_FSL_CCSR_GUR_LE
+#define CONFIG_SYS_FSL_CCSR_SCFG_LE
+#define CONFIG_SYS_FSL_ESDHC_LE
+#define CONFIG_SYS_FSL_PEX_LUT_LE
+
+#define CONFIG_SYS_MEMAC_LITTLE_ENDIAN
+
+/* Generic Interrupt Controller Definitions */
+#define GICD_BASE				0x06000000
+#define GICR_BASE				0x06200000
+
+/* SMMU Definitions */
+#define SMMU_BASE				0x05000000 /* GR0 Base */
+
+/* SFP */
+#define CONFIG_SYS_FSL_SFP_VER_3_4
+#define CONFIG_SYS_FSL_SFP_LE
+#define CONFIG_SYS_FSL_SRK_LE
+
+/* Security Monitor */
+#define CONFIG_SYS_FSL_SEC_MON_LE
+
+/* Secure Boot */
+#define CONFIG_ESBC_HDR_LS
+
+/* DCFG - GUR */
+#define CONFIG_SYS_FSL_CCSR_GUR_LE
+
+#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC		1
+
 #elif defined(CONFIG_FSL_LSCH2)
 #define CONFIG_SYS_FSL_OCRAM_BASE		0x10000000 /* initial RAM */
 #define SYS_FSL_OCRAM_SPACE_SIZE		0x00200000 /* 2M space */
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
index c041a31..68354ff 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
@@ -20,8 +20,12 @@ enum srds_prtcl {
 	PCIE2,
 	PCIE3,
 	PCIE4,
+	PCIE5,
+	PCIE6,
 	SATA1,
 	SATA2,
+	SATA3,
+	SATA4,
 	XAUI1,
 	XAUI2,
 	XFI1,
@@ -32,6 +36,12 @@ enum srds_prtcl {
 	XFI6,
 	XFI7,
 	XFI8,
+	XFI9,
+	XFI10,
+	XFI11,
+	XFI12,
+	XFI13,
+	XFI14,
 	SGMII1,
 	SGMII2,
 	SGMII3,
@@ -48,10 +58,28 @@ enum srds_prtcl {
 	SGMII14,
 	SGMII15,
 	SGMII16,
+	SGMII17,
+	SGMII18,
 	QSGMII_A,
 	QSGMII_B,
 	QSGMII_C,
 	QSGMII_D,
+	_25GE1,
+	_25GE2,
+	_25GE3,
+	_25GE4,
+	_25GE5,
+	_25GE6,
+	_25GE7,
+	_25GE8,
+	_25GE9,
+	_25GE10,
+	_40GE1,
+	_40GE2,
+	_50GE1,
+	_50GE2,
+	_100GE1,
+	_100GE2,
 	SERDES_PRCTL_COUNT
 };
 
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
index 4e01781..2ed6b99 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
@@ -15,7 +15,11 @@
 #define CONFIG_SYS_FSL_DDR3_ADDR		0x08210000
 #define CONFIG_SYS_FSL_GUTS_ADDR		(CONFIG_SYS_IMMR + 0x00E00000)
 #define CONFIG_SYS_FSL_PMU_ADDR			(CONFIG_SYS_IMMR + 0x00E30000)
+#ifdef CONFIG_ARCH_LX2160A
+#define CONFIG_SYS_FSL_RST_ADDR			(CONFIG_SYS_IMMR + 0x00e88180)
+#else
 #define CONFIG_SYS_FSL_RST_ADDR			(CONFIG_SYS_IMMR + 0x00E60000)
+#endif
 #define CONFIG_SYS_FSL_CH3_CLK_GRPA_ADDR	(CONFIG_SYS_IMMR + 0x00300000)
 #define CONFIG_SYS_FSL_CH3_CLK_GRPB_ADDR	(CONFIG_SYS_IMMR + 0x00310000)
 #define CONFIG_SYS_FSL_CH3_CLK_CTRL_ADDR	(CONFIG_SYS_IMMR + 0x00370000)
@@ -324,6 +328,28 @@ struct ccsr_gur {
 #define FSL_CHASSIS3_SRDS2_PRTCL_SHIFT	FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT
 #define FSL_CHASSIS3_SRDS1_REGSR	29
 #define FSL_CHASSIS3_SRDS2_REGSR	29
+#elif defined(CONFIG_ARCH_LX2160A)
+#define FSL_CHASSIS3_EC1_REGSR  27
+#define FSL_CHASSIS3_EC2_REGSR  27
+#define FSL_CHASSIS3_EC1_REGSR_PRTCL_MASK	0x00000003
+#define FSL_CHASSIS3_EC1_REGSR_PRTCL_SHIFT	0
+#define FSL_CHASSIS3_EC2_REGSR_PRTCL_MASK	0x00000007
+#define FSL_CHASSIS3_EC2_REGSR_PRTCL_SHIFT	2
+#define FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK   0x001F0000
+#define FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT  16
+#define FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_MASK   0x03E00000
+#define FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT  21
+#define FSL_CHASSIS3_RCWSR28_SRDS3_PRTCL_MASK   0x7C000000
+#define FSL_CHASSIS3_RCWSR28_SRDS3_PRTCL_SHIFT  26
+#define FSL_CHASSIS3_SRDS1_PRTCL_MASK	FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK
+#define FSL_CHASSIS3_SRDS1_PRTCL_SHIFT	FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT
+#define FSL_CHASSIS3_SRDS2_PRTCL_MASK	FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_MASK
+#define FSL_CHASSIS3_SRDS2_PRTCL_SHIFT	FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT
+#define FSL_CHASSIS3_SRDS3_PRTCL_MASK	FSL_CHASSIS3_RCWSR28_SRDS3_PRTCL_MASK
+#define FSL_CHASSIS3_SRDS3_PRTCL_SHIFT	FSL_CHASSIS3_RCWSR28_SRDS3_PRTCL_SHIFT
+#define FSL_CHASSIS3_SRDS1_REGSR	29
+#define FSL_CHASSIS3_SRDS2_REGSR	29
+#define FSL_CHASSIS3_SRDS3_REGSR	29
 #elif defined(CONFIG_ARCH_LS1088A)
 #define FSL_CHASSIS3_EC1_REGSR  26
 #define FSL_CHASSIS3_EC2_REGSR  26
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/soc.h b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
index daa1c70..f5bef6d 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/soc.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
@@ -96,12 +96,18 @@ enum boot_src get_boot_src(void);
 #define SVR_LS2044A		0x870930
 #define SVR_LS2081A		0x870918
 #define SVR_LS2041A		0x870914
+#define SVR_LX2160A		0x873601
+#define SVR_LX2120A		0x873621
+#define SVR_LX2080A		0x873603
 
 #define SVR_MAJ(svr)		(((svr) >> 4) & 0xf)
 #define SVR_MIN(svr)		(((svr) >> 0) & 0xf)
 #define SVR_REV(svr)		(((svr) >> 0) & 0xff)
 #define SVR_SOC_VER(svr)	(((svr) >> 8) & SVR_WO_E)
 #define IS_E_PROCESSOR(svr)	(!((svr >> 8) & 0x1))
+#ifdef CONFIG_ARCH_LX2160A
+#define IS_C_PROCESSOR(svr)	(!((svr >> 12) & 0x1))
+#endif
 #define IS_SVR_REV(svr, maj, min) \
 		((SVR_MAJ(svr) == (maj)) && (SVR_MIN(svr) == (min)))
 #define SVR_DEV(svr)		((svr) >> 8)
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h
index 8d002da..e017d8b 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h
@@ -1,5 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
+ * Copyright 2015-2018 NXP
  * Copyright 2014 Freescale Semiconductor, Inc.
  *
  */
@@ -69,11 +70,11 @@
 #define FSL_SDMMC_STREAM_ID		3
 #define FSL_SATA1_STREAM_ID		4
 
-#if defined(CONFIG_ARCH_LS2080A)
+#if defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LX2160A)
 #define FSL_SATA2_STREAM_ID		5
 #endif
 
-#if defined(CONFIG_ARCH_LS2080A)
+#if defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LX2160A)
 #define FSL_DMA_STREAM_ID		6
 #elif defined(CONFIG_ARCH_LS1088A)
 #define FSL_DMA_STREAM_ID		5
@@ -82,6 +83,10 @@
 /* PCI - programmed in PEXn_LUT */
 #define FSL_PEX_STREAM_ID_START		7
 
+#ifdef CONFIG_ARCH_LX2160A
+#define FSL_PEX_STREAM_ID_NUM		(0x100)
+#endif
+
 #if defined(CONFIG_ARCH_LS2080A)
 #define FSL_PEX_STREAM_ID_END		22
 #elif defined(CONFIG_ARCH_LS1088A)
diff --git a/drivers/ddr/fsl/Kconfig b/drivers/ddr/fsl/Kconfig
index a3d2bd5..c5bd8a8 100644
--- a/drivers/ddr/fsl/Kconfig
+++ b/drivers/ddr/fsl/Kconfig
@@ -34,6 +34,7 @@ config SYS_NUM_DDR_CTLRS
 			ARCH_P4080	|| \
 			ARCH_P5020	|| \
 			ARCH_P5040	|| \
+			ARCH_LX2160A	|| \
 			ARCH_T4160
 	default 1
 
diff --git a/drivers/net/ldpaa_eth/Makefile b/drivers/net/ldpaa_eth/Makefile
index 477ee4f..1d85b2c 100644
--- a/drivers/net/ldpaa_eth/Makefile
+++ b/drivers/net/ldpaa_eth/Makefile
@@ -1,8 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0+
-#
+# Copyright 2015-2018 NXP
 # Copyright 2014 Freescale Semiconductor, Inc.
 
 obj-y += ldpaa_wriop.o
 obj-y += ldpaa_eth.o
 obj-$(CONFIG_ARCH_LS2080A) += ls2080a.o
 obj-$(CONFIG_ARCH_LS1088A) += ls1088a.o
+obj-$(CONFIG_ARCH_LX2160A) += lx2160a.o
diff --git a/drivers/net/ldpaa_eth/lx2160a.c b/drivers/net/ldpaa_eth/lx2160a.c
new file mode 100644
index 0000000..7dd46c0
--- /dev/null
+++ b/drivers/net/ldpaa_eth/lx2160a.c
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+#include <common.h>
+#include <phy.h>
+#include <fsl-mc/ldpaa_wriop.h>
+#include <asm/io.h>
+#include <asm/arch/fsl_serdes.h>
+#include <asm/arch/soc.h>
+
+u32 dpmac_to_devdisr[] = {
+	[WRIOP1_DPMAC1] = FSL_CHASSIS3_DEVDISR2_DPMAC1,
+	[WRIOP1_DPMAC2] = FSL_CHASSIS3_DEVDISR2_DPMAC2,
+	[WRIOP1_DPMAC3] = FSL_CHASSIS3_DEVDISR2_DPMAC3,
+	[WRIOP1_DPMAC4] = FSL_CHASSIS3_DEVDISR2_DPMAC4,
+	[WRIOP1_DPMAC5] = FSL_CHASSIS3_DEVDISR2_DPMAC5,
+	[WRIOP1_DPMAC6] = FSL_CHASSIS3_DEVDISR2_DPMAC6,
+	[WRIOP1_DPMAC7] = FSL_CHASSIS3_DEVDISR2_DPMAC7,
+	[WRIOP1_DPMAC8] = FSL_CHASSIS3_DEVDISR2_DPMAC8,
+	[WRIOP1_DPMAC9] = FSL_CHASSIS3_DEVDISR2_DPMAC9,
+	[WRIOP1_DPMAC10] = FSL_CHASSIS3_DEVDISR2_DPMAC10,
+	[WRIOP1_DPMAC11] = FSL_CHASSIS3_DEVDISR2_DPMAC11,
+	[WRIOP1_DPMAC12] = FSL_CHASSIS3_DEVDISR2_DPMAC12,
+	[WRIOP1_DPMAC13] = FSL_CHASSIS3_DEVDISR2_DPMAC13,
+	[WRIOP1_DPMAC14] = FSL_CHASSIS3_DEVDISR2_DPMAC14,
+	[WRIOP1_DPMAC15] = FSL_CHASSIS3_DEVDISR2_DPMAC15,
+	[WRIOP1_DPMAC16] = FSL_CHASSIS3_DEVDISR2_DPMAC16,
+	[WRIOP1_DPMAC17] = FSL_CHASSIS3_DEVDISR2_DPMAC17,
+	[WRIOP1_DPMAC18] = FSL_CHASSIS3_DEVDISR2_DPMAC18,
+};
+
+static int is_device_disabled(int dpmac_id)
+{
+	struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
+	u32 devdisr2 = in_le32(&gur->devdisr2);
+
+	return dpmac_to_devdisr[dpmac_id] & devdisr2;
+}
+
+void wriop_dpmac_disable(int dpmac_id)
+{
+	struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
+
+	setbits_le32(&gur->devdisr2, dpmac_to_devdisr[dpmac_id]);
+}
+
+void wriop_dpmac_enable(int dpmac_id)
+{
+	struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
+
+	clrbits_le32(&gur->devdisr2, dpmac_to_devdisr[dpmac_id]);
+}
+
+phy_interface_t wriop_dpmac_enet_if(int dpmac_id, int lane_prtcl)
+{
+	enum srds_prtcl;
+
+	if (is_device_disabled(dpmac_id + 1))
+		return PHY_INTERFACE_MODE_NONE;
+
+	if (lane_prtcl >= SGMII1 && lane_prtcl <= SGMII18)
+		return PHY_INTERFACE_MODE_SGMII;
+
+	if (lane_prtcl >= XFI1 && lane_prtcl <= XFI14)
+		return PHY_INTERFACE_MODE_XGMII;
+
+	if (lane_prtcl >= _25GE1 && lane_prtcl <= _25GE10)
+		return PHY_INTERFACE_MODE_25G_AUI;
+
+	if (lane_prtcl >= _40GE1 && lane_prtcl <= _40GE2)
+		return PHY_INTERFACE_MODE_XLAUI;
+
+	if (lane_prtcl >= _50GE1 && lane_prtcl <= _50GE2)
+		return PHY_INTERFACE_MODE_CAUI2;
+
+	if (lane_prtcl >= _100GE1 && lane_prtcl <= _100GE2)
+		return PHY_INTERFACE_MODE_CAUI4;
+
+	return PHY_INTERFACE_MODE_NONE;
+}
+
+#ifdef CONFIG_SYS_FSL_HAS_RGMII
+void fsl_rgmii_init(void)
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	u32 ec;
+
+#ifdef CONFIG_SYS_FSL_EC1
+	ec = gur_in32(&gur->rcwsr[FSL_CHASSIS3_EC1_REGSR - 1])
+		& FSL_CHASSIS3_EC1_REGSR_PRTCL_MASK;
+	ec >>= FSL_CHASSIS3_EC1_REGSR_PRTCL_SHIFT;
+
+	if (!ec)
+		wriop_init_dpmac_enet_if(17, PHY_INTERFACE_MODE_RGMII_ID);
+#endif
+
+#ifdef CONFIG_SYS_FSL_EC2
+	ec = gur_in32(&gur->rcwsr[FSL_CHASSIS3_EC2_REGSR - 1])
+		& FSL_CHASSIS3_EC2_REGSR_PRTCL_MASK;
+	ec >>= FSL_CHASSIS3_EC2_REGSR_PRTCL_SHIFT;
+
+	if (!ec)
+		wriop_init_dpmac_enet_if(18, PHY_INTERFACE_MODE_RGMII_ID);
+#endif
+}
+#endif
