Message ID | 1518019402-29979-2-git-send-email-jagan@amarulasolutions.com |
---|---|
State | Deferred |
Delegated to: | Jagannadha Sutradharudu Teki |
Headers | show |
Series | [U-Boot,v3,1/2] i.MX6: nand: add nandbcb update command | expand |
> Add Kconfig entry for CMD_NANDBCB, and default y on i.MX6 > platform with NAND_MXS defined. > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > --- > Changes for v3: > - Fixed Typo 'seprate' > Changes for v2: > - New patch > > arch/arm/mach-imx/Kconfig | 11 +++++++++++ > 1 file changed, 11 insertions(+) > > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig > index 3aec89d..1b9c275 100644 > --- a/arch/arm/mach-imx/Kconfig > +++ b/arch/arm/mach-imx/Kconfig > @@ -71,6 +71,17 @@ config CMD_HDMIDETECT > This enables the 'hdmidet' command which detects if an HDMI monitor > is connected. > > +config CMD_NANDBCB > + bool "i.MX6 NAND Boot Control Block(BCB) command" > + depends on NAND && CMD_MTDPARTS > + default y if ARCH_MX6 && NAND_MXS > + help > + Unlike normal 'nand write/erase' commands, this command update > + Boot Control Block(BCB) for i.MX6 platform NAND IP's. > + > + This is similar to kobs-ng, which is used in Linux as separate > + rootfs package. > + > config NXP_BOARD_REVISION > bool "Read NXP board revision from fuses" > depends on ARCH_MX6 || ARCH_MX7 Tested By : Shyam Saini <shyam@amarulasolutions.com>
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 3aec89d..1b9c275 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -71,6 +71,17 @@ config CMD_HDMIDETECT This enables the 'hdmidet' command which detects if an HDMI monitor is connected. +config CMD_NANDBCB + bool "i.MX6 NAND Boot Control Block(BCB) command" + depends on NAND && CMD_MTDPARTS + default y if ARCH_MX6 && NAND_MXS + help + Unlike normal 'nand write/erase' commands, this command update + Boot Control Block(BCB) for i.MX6 platform NAND IP's. + + This is similar to kobs-ng, which is used in Linux as separate + rootfs package. + config NXP_BOARD_REVISION bool "Read NXP board revision from fuses" depends on ARCH_MX6 || ARCH_MX7
Add Kconfig entry for CMD_NANDBCB, and default y on i.MX6 platform with NAND_MXS defined. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- Changes for v3: - Fixed Typo 'seprate' Changes for v2: - New patch arch/arm/mach-imx/Kconfig | 11 +++++++++++ 1 file changed, 11 insertions(+)