diff mbox

[U-Boot,v3,1/3] SECURE_BOOT: Unify memory map for Layerscape based platforms

Message ID 1502882010-27829-1-git-send-email-sumit.garg@nxp.com
State Accepted
Commit 06fb06f66c57912b53bda9fd1772d5d069433cbd
Delegated to: York Sun
Headers show

Commit Message

Sumit Garg Aug. 16, 2017, 11:13 a.m. UTC 
Unify memory map for Layerscape based platforms. This patch includes
changes in bootscript, bootscript header and PPA header addresses
change as per unified memory map.

Signed-off-by: Sumit Garg <sumit.garg@nxp.com>
Tested-by: Vinitha Pillai <vinitha.pillai@nxp.com>
---

Changes in v3:
Rebasing of the patch on top commit.
This patch supersedes https://patchwork.ozlabs.org/patch/756260/

 arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 12 +++----
 arch/arm/include/asm/fsl_secure_boot.h    | 54 +++++++++++++------------------
 2 files changed, 28 insertions(+), 38 deletions(-)

Comments

York Sun Sept. 13, 2017, 2:19 a.m. UTC | #1 
On 08/15/2017 09:45 PM, Sumit Garg wrote:
> Unify memory map for Layerscape based platforms. This patch includes
> changes in bootscript, bootscript header and PPA header addresses
> change as per unified memory map.
> 
> Signed-off-by: Sumit Garg <sumit.garg@nxp.com>
> Tested-by: Vinitha Pillai <vinitha.pillai@nxp.com>
> ---
> 
> Changes in v3:
> Rebasing of the patch on top commit.
> This patch supersedes https://patchwork.ozlabs.org/patch/756260/
> 

Applied to fsl-qoriq master. Thanks.

York
diff mbox

Patch

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index 5825f9b..b7549a0 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -194,12 +194,12 @@  config SYS_LS_PPA_FW_ADDR
 config SYS_LS_PPA_ESBC_ADDR
 	hex "hdr address of PPA firmware loading from"
 	depends on FSL_LS_PPA && CHAIN_OF_TRUST
-	default 0x600c0000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1043A
-	default 0x40740000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1046A
-	default 0x40480000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1012A
-	default 0x580c40000 if SYS_LS_PPA_FW_IN_XIP && FSL_LSCH3
-	default 0x700000 if SYS_LS_PPA_FW_IN_MMC
-	default 0x700000 if SYS_LS_PPA_FW_IN_NAND
+	default 0x60680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1043A
+	default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1046A
+	default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1012A
+	default 0x580680000 if SYS_LS_PPA_FW_IN_XIP && FSL_LSCH3
+	default 0x680000 if SYS_LS_PPA_FW_IN_MMC
+	default 0x680000 if SYS_LS_PPA_FW_IN_NAND
 	help
 	  If the PPA header firmware locate at XIP flash, such as NOR or
 	  QSPI flash, this address is a directly memory-mapped.
diff --git a/arch/arm/include/asm/fsl_secure_boot.h b/arch/arm/include/asm/fsl_secure_boot.h
index b0b3b93..63845a2 100644
--- a/arch/arm/include/asm/fsl_secure_boot.h
+++ b/arch/arm/include/asm/fsl_secure_boot.h
@@ -1,5 +1,6 @@ 
 /*
  * Copyright 2015 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -71,55 +72,44 @@ 
  * DDR memory map
  */
 #ifdef CONFIG_FSL_LSCH3
-#define CONFIG_BS_HDR_ADDR_DEVICE	0x580d00000
-#define CONFIG_BS_ADDR_DEVICE		0x580e00000
-#define CONFIG_BS_HDR_ADDR_RAM		0xa0d00000
-#define CONFIG_BS_ADDR_RAM		0xa0e00000
-#define CONFIG_BS_HDR_SIZE		0x00002000
+#define CONFIG_BS_ADDR_DEVICE		0x580600000
+#define CONFIG_BS_HDR_ADDR_DEVICE	0x580640000
 #define CONFIG_BS_SIZE			0x00001000
+#define CONFIG_BS_HDR_SIZE		0x00004000
+#define CONFIG_BS_ADDR_RAM		0xa0600000
+#define CONFIG_BS_HDR_ADDR_RAM		0xa0640000
 #else
 #ifdef CONFIG_SD_BOOT
 /* For SD boot address and size are assigned in terms of sector
  * offset and no. of sectors respectively.
  */
-#if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A)
-#define CONFIG_BS_HDR_ADDR_DEVICE	0x00000920
-#else
-#define CONFIG_BS_HDR_ADDR_DEVICE       0x00000900
-#endif
-#define CONFIG_BS_ADDR_DEVICE		0x00000940
-#define CONFIG_BS_HDR_SIZE		0x00000010
+#define CONFIG_BS_ADDR_DEVICE		0x00003000
+#define CONFIG_BS_HDR_ADDR_DEVICE	0x00003200
 #define CONFIG_BS_SIZE			0x00000008
+#define CONFIG_BS_HDR_SIZE		0x00000010
 #elif defined(CONFIG_NAND_BOOT)
-#define CONFIG_BS_HDR_ADDR_DEVICE      0x00800000
-#define CONFIG_BS_ADDR_DEVICE          0x00802000
-#define CONFIG_BS_HDR_SIZE             0x00002000
-#define CONFIG_BS_SIZE                 0x00001000
-#elif defined(CONFIG_QSPI_BOOT)
-#ifdef CONFIG_ARCH_LS1046A
-#define CONFIG_BS_HDR_ADDR_DEVICE	0x40780000
-#define CONFIG_BS_ADDR_DEVICE		0x40800000
-#elif defined(CONFIG_ARCH_LS1012A)
-#define CONFIG_BS_HDR_ADDR_DEVICE      0x400c0000
-#define CONFIG_BS_ADDR_DEVICE          0x40060000
-#else
-#error "Platform not supported"
-#endif
+#define CONFIG_BS_ADDR_DEVICE		0x00600000
+#define CONFIG_BS_HDR_ADDR_DEVICE	0x00640000
+#define CONFIG_BS_SIZE			0x00001000
 #define CONFIG_BS_HDR_SIZE		0x00002000
+#elif defined(CONFIG_QSPI_BOOT)
+#define CONFIG_BS_ADDR_DEVICE		0x40600000
+#define CONFIG_BS_HDR_ADDR_DEVICE	0x40640000
 #define CONFIG_BS_SIZE			0x00001000
-#else /* Default NOR Boot */
-#define CONFIG_BS_HDR_ADDR_DEVICE	0x600a0000
-#define CONFIG_BS_ADDR_DEVICE		0x60060000
 #define CONFIG_BS_HDR_SIZE		0x00002000
+#else /* Default NOR Boot */
+#define CONFIG_BS_ADDR_DEVICE		0x60600000
+#define CONFIG_BS_HDR_ADDR_DEVICE	0x60640000
 #define CONFIG_BS_SIZE			0x00001000
+#define CONFIG_BS_HDR_SIZE		0x00002000
 #endif
-#define CONFIG_BS_HDR_ADDR_RAM		0x81000000
-#define CONFIG_BS_ADDR_RAM		0x81020000
+#define CONFIG_BS_ADDR_RAM		0x81000000
+#define CONFIG_BS_HDR_ADDR_RAM		0x81020000
 #endif
 
 #ifdef CONFIG_BOOTSCRIPT_COPY_RAM
-#define CONFIG_BOOTSCRIPT_HDR_ADDR	CONFIG_BS_HDR_ADDR_RAM
 #define CONFIG_BOOTSCRIPT_ADDR		CONFIG_BS_ADDR_RAM
+#define CONFIG_BOOTSCRIPT_HDR_ADDR	CONFIG_BS_HDR_ADDR_RAM
 #else
 #define CONFIG_BOOTSCRIPT_HDR_ADDR	CONFIG_BS_HDR_ADDR_DEVICE
 /* BOOTSCRIPT_ADDR is not required */