diff --git a/board/freescale/mx6sabresd/MAINTAINERS b/board/freescale/mx6sabresd/MAINTAINERS
index 5efc795..6b3fee9 100644
--- a/board/freescale/mx6sabresd/MAINTAINERS
+++ b/board/freescale/mx6sabresd/MAINTAINERS
@@ -3,9 +3,6 @@ M:	Fabio Estevam <fabio.estevam@nxp.com>
 S:	Maintained
 F:	board/freescale/mx6sabresd/
 F:	include/configs/mx6sabresd.h
-F:	configs/mx6dlsabresd_defconfig
-F:	configs/mx6qsabresd_defconfig
-F:	configs/mx6sabresd_spl_defconfig
 F:	configs/imx6dl_sabresd_defconfig
 F:	configs/imx6q_sabresd_defconfig
 F:	configs/imx6qp_sabresd_defconfig
diff --git a/board/freescale/mx6sabresd/mx6dlsabresd.cfg b/board/freescale/mx6sabresd/mx6dlsabresd.cfg
deleted file mode 100644
index be9f87f..0000000
--- a/board/freescale/mx6sabresd/mx6dlsabresd.cfg
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * Copyright (C) 2014 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- *
- * Refer doc/README.imximage for more details about how-to configure
- * and create imximage boot image
- *
- * The syntax is taken as close as possible with the kwbimage
- */
-
-/* image version */
-
-IMAGE_VERSION 2
-
-/*
- * Boot Device : one of
- * spi, sd (the board has no nand neither onenand)
- */
-
-BOOT_FROM	sd
-
-/*
- * Device Configuration Data (DCD)
- *
- * Each entry must have the format:
- * Addr-type           Address        Value
- *
- * where:
- *	Addr-type register length (1,2 or 4 bytes)
- *	Address	  absolute address of the register
- *	value	  value to be stored in the register
- */
-DATA 4	0x020e0774 0x000C0000
-DATA 4	0x020e0754 0x00000000
-DATA 4	0x020e04ac 0x00000030
-DATA 4	0x020e04b0 0x00000030
-DATA 4	0x020e0464 0x00000030
-DATA 4	0x020e0490 0x00000030
-DATA 4	0x020e074c 0x00000030
-DATA 4	0x020e0494 0x00000030
-DATA 4	0x020e04a0 0x00000000
-DATA 4	0x020e04b4 0x00000030
-DATA 4	0x020e04b8 0x00000030
-DATA 4	0x020e076c 0x00000030
-DATA 4	0x020e0750 0x00020000
-DATA 4	0x020e04bc 0x00000030
-DATA 4	0x020e04c0 0x00000030
-DATA 4	0x020e04c4 0x00000030
-DATA 4	0x020e04c8 0x00000030
-DATA 4	0x020e04cc 0x00000030
-DATA 4	0x020e04d0 0x00000030
-DATA 4	0x020e04d4 0x00000030
-DATA 4	0x020e04d8 0x00000030
-DATA 4	0x020e0760 0x00020000
-DATA 4	0x020e0764 0x00000030
-DATA 4	0x020e0770 0x00000030
-DATA 4	0x020e0778 0x00000030
-DATA 4	0x020e077c 0x00000030
-DATA 4	0x020e0780 0x00000030
-DATA 4	0x020e0784 0x00000030
-DATA 4	0x020e078c 0x00000030
-DATA 4	0x020e0748 0x00000030
-DATA 4	0x020e0470 0x00000030
-DATA 4	0x020e0474 0x00000030
-DATA 4	0x020e0478 0x00000030
-DATA 4	0x020e047c 0x00000030
-DATA 4	0x020e0480 0x00000030
-DATA 4	0x020e0484 0x00000030
-DATA 4	0x020e0488 0x00000030
-DATA 4	0x020e048c 0x00000030
-DATA 4	0x021b0800 0xa1390003
-DATA 4	0x021b080c 0x001F001F
-DATA 4	0x021b0810 0x001F001F
-DATA 4	0x021b480c 0x001F001F
-DATA 4	0x021b4810 0x001F001F
-DATA 4	0x021b083c 0x4220021F
-DATA 4	0x021b0840 0x0207017E
-DATA 4	0x021b483c 0x4201020C
-DATA 4	0x021b4840 0x01660172
-DATA 4	0x021b0848 0x4A4D4E4D
-DATA 4	0x021b4848 0x4A4F5049
-DATA 4	0x021b0850 0x3F3C3D31
-DATA 4	0x021b4850 0x3238372B
-DATA 4	0x021b081c 0x33333333
-DATA 4	0x021b0820 0x33333333
-DATA 4	0x021b0824 0x33333333
-DATA 4	0x021b0828 0x33333333
-DATA 4	0x021b481c 0x33333333
-DATA 4	0x021b4820 0x33333333
-DATA 4	0x021b4824 0x33333333
-DATA 4	0x021b4828 0x33333333
-DATA 4	0x021b08b8 0x00000800
-DATA 4	0x021b48b8 0x00000800
-DATA 4	0x021b0004 0x0002002D
-DATA 4	0x021b0008 0x00333030
-DATA 4	0x021b000c 0x3F435313
-DATA 4	0x021b0010 0xB66E8B63
-DATA 4	0x021b0014 0x01FF00DB
-DATA 4	0x021b0018 0x00001740
-DATA 4	0x021b001c 0x00008000
-DATA 4	0x021b002c 0x000026d2
-DATA 4	0x021b0030 0x00431023
-DATA 4	0x021b0040 0x00000027
-DATA 4	0x021b0000 0x831A0000
-DATA 4	0x021b001c 0x04008032
-DATA 4	0x021b001c 0x00008033
-DATA 4	0x021b001c 0x00048031
-DATA 4	0x021b001c 0x05208030
-DATA 4 0x021b001c 0x04008040
-DATA 4	0x021b0020 0x00005800
-DATA 4	0x021b0818 0x00011117
-DATA 4	0x021b4818 0x00011117
-DATA 4	0x021b0004 0x0002556D
-DATA 4	0x021b0404 0x00011006
-DATA 4	0x021b001c 0x00000000
-
-/* set the default clock gate to save power */
-DATA 4 0x020c4068 0x00C03F3F
-DATA 4 0x020c406c 0x0030FC03
-DATA 4 0x020c4070 0x0FFFC000
-DATA 4 0x020c4074 0x3FF00000
-DATA 4 0x020c4078 0x00FFF300
-DATA 4 0x020c407c 0x0F0000C3
-DATA 4 0x020c4080 0x000003FF
-
-/* enable AXI cache for VDOA/VPU/IPU */
-DATA 4 0x020e0010 0xF00000CF
-/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
-DATA 4 0x020e0018 0x007F007F
-DATA 4 0x020e001c 0x007F007F
diff --git a/board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg b/board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg
deleted file mode 100644
index bb6c60b..0000000
--- a/board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc.
- * Jason Liu <r64343@freescale.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- *
- * Refer doc/README.imximage for more details about how-to configure
- * and create imximage boot image
- *
- * The syntax is taken as close as possible with the kwbimage
- */
-
-/* image version */
-IMAGE_VERSION 2
-
-/*
- * Boot Device : one of
- * spi, sd (the board has no nand neither onenand)
- */
-BOOT_FROM      sd
-
-/*
- * Device Configuration Data (DCD)
- *
- * Each entry must have the format:
- * Addr-type           Address        Value
- *
- * where:
- *      Addr-type register length (1,2 or 4 bytes)
- *      Address   absolute address of the register
- *      value     value to be stored in the register
- */
-DATA 4 0x020e05a8 0x00000030
-DATA 4 0x020e05b0 0x00000030
-DATA 4 0x020e0524 0x00000030
-DATA 4 0x020e051c 0x00000030
-
-DATA 4 0x020e0518 0x00000030
-DATA 4 0x020e050c 0x00000030
-DATA 4 0x020e05b8 0x00000030
-DATA 4 0x020e05c0 0x00000030
-
-DATA 4 0x020e05ac 0x00020030
-DATA 4 0x020e05b4 0x00020030
-DATA 4 0x020e0528 0x00020030
-DATA 4 0x020e0520 0x00020030
-
-DATA 4 0x020e0514 0x00020030
-DATA 4 0x020e0510 0x00020030
-DATA 4 0x020e05bc 0x00020030
-DATA 4 0x020e05c4 0x00020030
-
-DATA 4 0x020e056c 0x00020030
-DATA 4 0x020e0578 0x00020030
-DATA 4 0x020e0588 0x00020030
-DATA 4 0x020e0594 0x00020030
-
-DATA 4 0x020e057c 0x00020030
-DATA 4 0x020e0590 0x00003000
-DATA 4 0x020e0598 0x00003000
-DATA 4 0x020e058c 0x00000000
-
-DATA 4 0x020e059c 0x00003030
-DATA 4 0x020e05a0 0x00003030
-DATA 4 0x020e0784 0x00000030
-DATA 4 0x020e0788 0x00000030
-
-DATA 4 0x020e0794 0x00000030
-DATA 4 0x020e079c 0x00000030
-DATA 4 0x020e07a0 0x00000030
-DATA 4 0x020e07a4 0x00000030
-
-DATA 4 0x020e07a8 0x00000030
-DATA 4 0x020e0748 0x00000030
-DATA 4 0x020e074c 0x00000030
-DATA 4 0x020e0750 0x00020000
-
-DATA 4 0x020e0758 0x00000000
-DATA 4 0x020e0774 0x00020000
-DATA 4 0x020e078c 0x00000030
-DATA 4 0x020e0798 0x000C0000
-
-DATA 4 0x021b081c 0x33333333
-DATA 4 0x021b0820 0x33333333
-DATA 4 0x021b0824 0x33333333
-DATA 4 0x021b0828 0x33333333
-
-DATA 4 0x021b481c 0x33333333
-DATA 4 0x021b4820 0x33333333
-DATA 4 0x021b4824 0x33333333
-DATA 4 0x021b4828 0x33333333
-
-DATA 4 0x021b0018 0x00081740
-
-DATA 4 0x021b001c 0x00008000
-DATA 4 0x021b000c 0x555A7974
-DATA 4 0x021b0010 0xDB538F64
-DATA 4 0x021b0014 0x01FF00DB
-DATA 4 0x021b002c 0x000026D2
-
-DATA 4 0x021b0030 0x005A1023
-DATA 4 0x021b0008 0x09444040
-DATA 4 0x021b0004 0x00025576
-DATA 4 0x021b0040 0x00000027
-DATA 4 0x021b0000 0x831A0000
-
-DATA 4 0x021b001c 0x04088032
-DATA 4 0x021b001c 0x0408803A
-DATA 4 0x021b001c 0x00008033
-DATA 4 0x021b001c 0x0000803B
-DATA 4 0x021b001c 0x00428031
-DATA 4 0x021b001c 0x00428039
-DATA 4 0x021b001c 0x19308030
-DATA 4 0x021b001c 0x19308038
-
-DATA 4 0x021b001c 0x04008040
-DATA 4 0x021b001c 0x04008048
-DATA 4 0x021b0800 0xA1380003
-DATA 4 0x021b4800 0xA1380003
-DATA 4 0x021b0020 0x00005800
-DATA 4 0x021b0818 0x00022227
-DATA 4 0x021b4818 0x00022227
-
-DATA 4 0x021b083c 0x434B0350
-DATA 4 0x021b0840 0x034C0359
-DATA 4 0x021b483c 0x434B0350
-DATA 4 0x021b4840 0x03650348
-DATA 4 0x021b0848 0x4436383B
-DATA 4 0x021b4848 0x39393341
-DATA 4 0x021b0850 0x35373933
-DATA 4 0x021b4850 0x48254A36
-
-DATA 4 0x021b080c 0x001F001F
-DATA 4 0x021b0810 0x001F001F
-
-DATA 4 0x021b480c 0x00440044
-DATA 4 0x021b4810 0x00440044
-
-DATA 4 0x021b08b8 0x00000800
-DATA 4 0x021b48b8 0x00000800
-
-DATA 4 0x021b001c 0x00000000
-DATA 4 0x021b0404 0x00011006
-
-/* set the default clock gate to save power */
-DATA 4 0x020c4068 0x00C03F3F
-DATA 4 0x020c406c 0x0030FC03
-DATA 4 0x020c4070 0x0FFFC000
-DATA 4 0x020c4074 0x3FF00000
-DATA 4 0x020c4078 0x00FFF300
-DATA 4 0x020c407c 0x0F0000C3
-DATA 4 0x020c4080 0x000003FF
-
-/* enable AXI cache for VDOA/VPU/IPU */
-DATA 4 0x020e0010 0xF00000CF
-/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
-DATA 4 0x020e0018 0x007F007F
-DATA 4 0x020e001c 0x007F007F
-
-/*
- * Setup CCM_CCOSR register as follows:
- *
- * cko1_en  = 1	   --> CKO1 enabled
- * cko1_div = 111  --> divide by 8
- * cko1_sel = 1011 --> ahb_clk_root
- *
- * This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz
- */
-DATA 4 0x020c4060 0x000000fb
diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c
index 67fc192..cbe8d5c 100644
--- a/board/freescale/mx6sabresd/mx6sabresd.c
+++ b/board/freescale/mx6sabresd/mx6sabresd.c
@@ -6,30 +6,24 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
+#include <common.h>
+#include <miiphy.h>
+#include <mmc.h>
+#include <fsl_esdhc.h>
+
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <linux/sizes.h>
+
 #include <asm/arch/clock.h>
-#include <asm/arch/imx-regs.h>
+#include <asm/arch/crm_regs.h>
 #include <asm/arch/iomux.h>
+#include <asm/arch/mxc_hdmi.h>
 #include <asm/arch/mx6-pins.h>
-#include <linux/errno.h>
-#include <asm/gpio.h>
-#include <asm/imx-common/mxc_i2c.h>
-#include <asm/imx-common/iomux-v3.h>
+#include <asm/arch/sys_proto.h>
 #include <asm/imx-common/boot_mode.h>
+#include <asm/imx-common/iomux-v3.h>
 #include <asm/imx-common/video.h>
-#include <mmc.h>
-#include <fsl_esdhc.h>
-#include <miiphy.h>
-#include <netdev.h>
-#include <asm/arch/mxc_hdmi.h>
-#include <asm/arch/crm_regs.h>
-#include <asm/io.h>
-#include <asm/arch/sys_proto.h>
-#include <i2c.h>
-#include <power/pmic.h>
-#include <power/pfuze100_pmic.h>
-#include "../common/pfuze.h"
-#include <asm/arch/mx6-ddr.h>
-#include <usb.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -37,28 +31,11 @@ DECLARE_GLOBAL_DATA_PTR;
 	PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm |			\
 	PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
 
-#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP |			\
-	PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm |			\
-	PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
-
-#define ENET_PAD_CTRL  (PAD_CTL_PUS_100K_UP |			\
-	PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
-
 #define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \
 		      PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
 
-#define I2C_PAD_CTRL  (PAD_CTL_PUS_100K_UP |			\
-	PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS |	\
-	PAD_CTL_ODE | PAD_CTL_SRE_FAST)
-
-#define I2C_PMIC	1
-
-#define I2C_PAD MUX_PAD_CTRL(I2C_PAD_CTRL)
-
 #define DISP0_PWR_EN	IMX_GPIO_NR(1, 21)
 
-#define KEY_VOL_UP	IMX_GPIO_NR(1, 4)
-
 int dram_init(void)
 {
 	gd->ram_size = imx_ddr_size();
@@ -70,80 +47,6 @@ static iomux_v3_cfg_t const uart1_pads[] = {
 	MX6_PAD_CSI0_DAT11__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
 };
 
-#ifndef CONFIG_OF_CONTROL
-static iomux_v3_cfg_t const enet_pads[] = {
-	MX6_PAD_ENET_MDIO__ENET_MDIO		| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_ENET_MDC__ENET_MDC		| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_TXC__RGMII_TXC	| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_TD0__RGMII_TD0	| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_TD1__RGMII_TD1	| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_TD2__RGMII_TD2	| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_TD3__RGMII_TD3	| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL	| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_ENET_REF_CLK__ENET_TX_CLK	| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_RXC__RGMII_RXC	| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_RD0__RGMII_RD0	| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_RD1__RGMII_RD1	| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_RD2__RGMII_RD2	| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_RD3__RGMII_RD3	| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL	| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	/* AR8031 PHY Reset */
-	MX6_PAD_ENET_CRS_DV__GPIO1_IO25		| MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
-static void setup_iomux_enet(void)
-{
-	imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
-
-	/* Reset AR8031 PHY */
-	gpio_direction_output(IMX_GPIO_NR(1, 25) , 0);
-	mdelay(10);
-	gpio_set_value(IMX_GPIO_NR(1, 25), 1);
-	udelay(100);
-}
-#endif
-
-static iomux_v3_cfg_t const usdhc2_pads[] = {
-	MX6_PAD_SD2_CLK__SD2_CLK	| MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD2_CMD__SD2_CMD	| MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD2_DAT0__SD2_DATA0	| MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD2_DAT1__SD2_DATA1	| MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD2_DAT2__SD2_DATA2	| MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD2_DAT3__SD2_DATA3	| MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_NANDF_D4__SD2_DATA4	| MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_NANDF_D5__SD2_DATA5	| MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_NANDF_D6__SD2_DATA6	| MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_NANDF_D7__SD2_DATA7	| MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_NANDF_D2__GPIO2_IO02	| MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
-};
-
-static iomux_v3_cfg_t const usdhc3_pads[] = {
-	MX6_PAD_SD3_CLK__SD3_CLK   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD3_CMD__SD3_CMD   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD3_DAT4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD3_DAT5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD3_DAT6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_NANDF_D0__GPIO2_IO00    | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
-};
-
-static iomux_v3_cfg_t const usdhc4_pads[] = {
-	MX6_PAD_SD4_CLK__SD4_CLK   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD4_CMD__SD4_CMD   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD4_DAT4__SD4_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD4_DAT5__SD4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD4_DAT6__SD4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD4_DAT7__SD4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-};
-
 static iomux_v3_cfg_t const ecspi1_pads[] = {
 	MX6_PAD_KEY_COL0__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
 	MX6_PAD_KEY_COL1__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
@@ -189,12 +92,11 @@ static iomux_v3_cfg_t const bl_pads[] = {
 
 static void enable_backlight(void)
 {
-	imx_iomux_v3_setup_multiple_pads(bl_pads, ARRAY_SIZE(bl_pads));
-
-#ifdef CONFIG_OF_CONTROL
 	struct gpio_desc backlight;
 	int ret;
 
+	imx_iomux_v3_setup_multiple_pads(bl_pads, ARRAY_SIZE(bl_pads));
+
 	/* Set Brightness to high */
 	ret = dm_gpio_lookup_name("GPIO1_21", &backlight);
 	if (ret) {
@@ -210,9 +112,6 @@ static void enable_backlight(void)
 
 	dm_gpio_set_dir_flags(&backlight, GPIOD_IS_OUT);
 	dm_gpio_set_value(&backlight, 1);
-#else
-	gpio_direction_output(DISP0_PWR_EN, 1);
-#endif
 }
 
 static void enable_rgb(struct display_info_t const *dev)
@@ -226,27 +125,11 @@ static void enable_lvds(struct display_info_t const *dev)
 	enable_backlight();
 }
 
-#ifndef CONFIG_DM_I2C
-static struct i2c_pads_info i2c_pad_info1 = {
-	.scl = {
-		.i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL | I2C_PAD,
-		.gpio_mode = MX6_PAD_KEY_COL3__GPIO4_IO12 | I2C_PAD,
-		.gp = IMX_GPIO_NR(4, 12)
-	},
-	.sda = {
-		.i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA | I2C_PAD,
-		.gpio_mode = MX6_PAD_KEY_ROW3__GPIO4_IO13 | I2C_PAD,
-		.gp = IMX_GPIO_NR(4, 13)
-	}
-};
-#endif
-
 static void setup_spi(void)
 {
 	imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads));
 }
 
-#ifndef CONFIG_OF_CONTROL
 iomux_v3_cfg_t const pcie_pads[] = {
 	MX6_PAD_EIM_D19__GPIO3_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL),	/* POWER */
 	MX6_PAD_GPIO_17__GPIO7_IO12 | MUX_PAD_CTRL(NO_PAD_CTRL),	/* RESET */
@@ -256,7 +139,6 @@ static void setup_pcie(void)
 {
 	imx_iomux_v3_setup_multiple_pads(pcie_pads, ARRAY_SIZE(pcie_pads));
 }
-#endif
 
 iomux_v3_cfg_t const di0_pads[] = {
 	MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK,	/* DISP0_CLK */
@@ -269,90 +151,6 @@ static void setup_iomux_uart(void)
 	imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
 }
 
-#if defined(CONFIG_FSL_ESDHC) && !defined(CONFIG_OF_CONTROL)
-struct fsl_esdhc_cfg usdhc_cfg[3] = {
-	{USDHC2_BASE_ADDR},
-	{USDHC3_BASE_ADDR},
-	{USDHC4_BASE_ADDR},
-};
-
-#define USDHC2_CD_GPIO	IMX_GPIO_NR(2, 2)
-#define USDHC3_CD_GPIO	IMX_GPIO_NR(2, 0)
-
-int board_mmc_get_env_dev(int devno)
-{
-	return devno - 1;
-}
-
-int board_mmc_getcd(struct mmc *mmc)
-{
-	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
-	int ret = 0;
-
-	switch (cfg->esdhc_base) {
-	case USDHC2_BASE_ADDR:
-		ret = !gpio_get_value(USDHC2_CD_GPIO);
-		break;
-	case USDHC3_BASE_ADDR:
-		ret = !gpio_get_value(USDHC3_CD_GPIO);
-		break;
-	case USDHC4_BASE_ADDR:
-		ret = 1; /* eMMC/uSDHC4 is always present */
-		break;
-	}
-
-	return ret;
-}
-
-#ifndef CONFIG_FSL_ESDHC
-int board_mmc_init(bd_t *bis)
-{
-	int ret;
-	int i;
-
-	/*
-	 * According to the board_mmc_init() the following map is done:
-	 * (U-Boot device node)    (Physical Port)
-	 * mmc0                    SD2
-	 * mmc1                    SD3
-	 * mmc2                    eMMC
-	 */
-	for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
-		switch (i) {
-		case 0:
-			imx_iomux_v3_setup_multiple_pads(
-				usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
-			gpio_direction_input(USDHC2_CD_GPIO);
-			usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
-			break;
-		case 1:
-			imx_iomux_v3_setup_multiple_pads(
-				usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
-			gpio_direction_input(USDHC3_CD_GPIO);
-			usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
-			break;
-		case 2:
-			imx_iomux_v3_setup_multiple_pads(
-				usdhc4_pads, ARRAY_SIZE(usdhc4_pads));
-			usdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
-			break;
-		default:
-			printf("Warning: you configured more USDHC controllers"
-			       "(%d) then supported by the board (%d)\n",
-			       i + 1, CONFIG_SYS_FSL_USDHC_NUM);
-			return -EINVAL;
-		}
-
-		ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
-		if (ret)
-			return ret;
-	}
-
-	return 0;
-}
-#endif
-#endif
-
 static int ar8031_phy_fixup(struct phy_device *phydev)
 {
 	unsigned short val;
@@ -533,7 +331,6 @@ int overwrite_console(void)
 	return 1;
 }
 
-#ifdef CONFIG_OF_CONTROL
 int imx6_pcie_toggle_power(void)
 {
 #ifdef CONFIG_PCIE_IMX_POWER_GPIO
@@ -592,80 +389,6 @@ int imx6_pcie_toggle_reset(void)
 #endif
 	return 0;
 }
-#endif
-
-#ifndef CONFIG_OF_CONTROL
-int board_eth_init(bd_t *bis)
-{
-	setup_iomux_enet();
-	setup_pcie();
-
-	return cpu_eth_init(bis);
-}
-#endif
-
-#if defined(CONFIG_USB_EHCI_MX6) && !defined(CONFIG_DM_USB)
-#define USB_OTHERREGS_OFFSET	0x800
-#define UCTRL_PWR_POL		(1 << 9)
-
-static iomux_v3_cfg_t const usb_otg_pads[] = {
-	MX6_PAD_EIM_D22__USB_OTG_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
-	MX6_PAD_ENET_RX_ER__USB_OTG_ID | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
-static iomux_v3_cfg_t const usb_hc1_pads[] = {
-	MX6_PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
-static void setup_usb(void)
-{
-	imx_iomux_v3_setup_multiple_pads(usb_otg_pads,
-					 ARRAY_SIZE(usb_otg_pads));
-
-	/*
-	 * set daisy chain for otg_pin_id on 6q.
-	 * for 6dl, this bit is reserved
-	 */
-	imx_iomux_set_gpr_register(1, 13, 1, 0);
-
-	imx_iomux_v3_setup_multiple_pads(usb_hc1_pads,
-					 ARRAY_SIZE(usb_hc1_pads));
-}
-
-int board_ehci_hcd_init(int port)
-{
-	u32 *usbnc_usb_ctrl;
-
-	if (port > 1)
-		return -EINVAL;
-
-	usbnc_usb_ctrl = (u32 *)(USB_BASE_ADDR + USB_OTHERREGS_OFFSET +
-				 port * 4);
-
-	setbits_le32(usbnc_usb_ctrl, UCTRL_PWR_POL);
-
-	return 0;
-}
-
-int board_ehci_power(int port, int on)
-{
-	switch (port) {
-	case 0:
-		break;
-	case 1:
-		if (on)
-			gpio_direction_output(IMX_GPIO_NR(1, 29), 1);
-		else
-			gpio_direction_output(IMX_GPIO_NR(1, 29), 0);
-		break;
-	default:
-		printf("MXC USB port %d not yet supported\n", port);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-#endif
 
 int board_early_init_f(void)
 {
@@ -685,46 +408,10 @@ int board_init(void)
 #ifdef CONFIG_MXC_SPI
 	setup_spi();
 #endif
-#ifndef CONFIG_DM_I2C
-	setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
-#endif
-#if defined(CONFIG_USB_EHCI_MX6) && !defined(CONFIG_DM_USB)
-	setup_usb();
-#endif
-
-	return 0;
-}
-
-#ifndef CONFIG_DM_PMIC
-int power_init_board(void)
-{
-	struct pmic *p;
-	unsigned int reg;
-	int ret;
-
-	p = pfuze_common_init(I2C_PMIC);
-	if (!p)
-		return -ENODEV;
-
-	ret = pfuze_mode_init(p, APS_PFM);
-	if (ret < 0)
-		return ret;
-
-	/* Increase VGEN3 from 2.5 to 2.8V */
-	pmic_reg_read(p, PFUZE100_VGEN3VOL, &reg);
-	reg &= ~LDO_VOL_MASK;
-	reg |= LDOB_2_80V;
-	pmic_reg_write(p, PFUZE100_VGEN3VOL, reg);
-
-	/* Increase VGEN5 from 2.8 to 3V */
-	pmic_reg_read(p, PFUZE100_VGEN5VOL, &reg);
-	reg &= ~LDO_VOL_MASK;
-	reg |= LDOB_3_00V;
-	pmic_reg_write(p, PFUZE100_VGEN5VOL, reg);
+	setup_pcie();
 
 	return 0;
 }
-#endif
 
 #ifdef CONFIG_MXC_SPI
 int board_spi_cs_gpio(unsigned bus, unsigned cs)
@@ -776,7 +463,51 @@ int checkboard(void)
 
 #ifdef CONFIG_FSL_ESDHC
 
-#if defined(CONFIG_OF_CONTROL) && !defined(CONFIG_DM_MMC)
+#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP |			\
+	PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm |			\
+	PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
+
+static iomux_v3_cfg_t const usdhc2_pads[] = {
+	MX6_PAD_SD2_CLK__SD2_CLK	| MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD2_CMD__SD2_CMD	| MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD2_DAT0__SD2_DATA0	| MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD2_DAT1__SD2_DATA1	| MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD2_DAT2__SD2_DATA2	| MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD2_DAT3__SD2_DATA3	| MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_NANDF_D4__SD2_DATA4	| MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_NANDF_D5__SD2_DATA5	| MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_NANDF_D6__SD2_DATA6	| MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_NANDF_D7__SD2_DATA7	| MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_NANDF_D2__GPIO2_IO02	| MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
+};
+
+static iomux_v3_cfg_t const usdhc3_pads[] = {
+	MX6_PAD_SD3_CLK__SD3_CLK   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD3_CMD__SD3_CMD   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD3_DAT4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD3_DAT5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD3_DAT6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_NANDF_D0__GPIO2_IO00    | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
+};
+
+static iomux_v3_cfg_t const usdhc4_pads[] = {
+	MX6_PAD_SD4_CLK__SD4_CLK   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD4_CMD__SD4_CMD   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD4_DAT4__SD4_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD4_DAT5__SD4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD4_DAT6__SD4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD4_DAT7__SD4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+};
+
 struct fsl_esdhc_cfg usdhc_cfg[3] = {
 	{USDHC2_BASE_ADDR},
 	{USDHC3_BASE_ADDR},
@@ -810,7 +541,6 @@ int board_mmc_getcd(struct mmc *mmc)
 
 	return ret;
 }
-#endif
 
 int board_mmc_init(bd_t *bis)
 {
@@ -854,6 +584,8 @@ int board_mmc_init(bd_t *bis)
 #endif
 
 #ifdef CONFIG_SPL_OS_BOOT
+#define KEY_VOL_UP	IMX_GPIO_NR(1, 4)
+
 int spl_start_uboot(void)
 {
 	gpio_direction_input(KEY_VOL_UP);
diff --git a/configs/mx6dlsabresd_defconfig b/configs/mx6dlsabresd_defconfig
deleted file mode 100644
index c61fcd2..0000000
--- a/configs/mx6dlsabresd_defconfig
+++ /dev/null
@@ -1,48 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX6=y
-CONFIG_TARGET_MX6SABRESD=y
-CONFIG_VIDEO=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6dlsabresd.cfg,MX6DL"
-CONFIG_BOOTDELAY=3
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_USB_MASS_STORAGE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_DFU_MMC=y
-CONFIG_DFU_SF=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PCI=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_MX6=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_CI_UDC=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="FSL"
-CONFIG_G_DNL_VENDOR_NUM=0x0525
-CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
-# CONFIG_VIDEO_SW_CURSOR is not set
-CONFIG_OF_LIBFDT=y
-CONFIG_SYS_I2C_MXC=y
-CONFIG_FEC_MXC=y
diff --git a/configs/mx6qsabresd_defconfig b/configs/mx6qsabresd_defconfig
deleted file mode 100644
index e9758e3..0000000
--- a/configs/mx6qsabresd_defconfig
+++ /dev/null
@@ -1,48 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX6=y
-CONFIG_TARGET_MX6SABRESD=y
-CONFIG_VIDEO=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg,MX6Q"
-CONFIG_BOOTDELAY=3
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_USB_MASS_STORAGE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_DFU_MMC=y
-CONFIG_DFU_SF=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PCI=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_MX6=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_CI_UDC=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="FSL"
-CONFIG_G_DNL_VENDOR_NUM=0x0525
-CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
-# CONFIG_VIDEO_SW_CURSOR is not set
-CONFIG_OF_LIBFDT=y
-CONFIG_SYS_I2C_MXC=y
-CONFIG_FEC_MXC=y
diff --git a/configs/mx6sabresd_spl_defconfig b/configs/mx6sabresd_spl_defconfig
deleted file mode 100644
index bba77b6..0000000
--- a/configs/mx6sabresd_spl_defconfig
+++ /dev/null
@@ -1,54 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX6=y
-CONFIG_SPL_GPIO_SUPPORT=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_TARGET_MX6SABRESD=y
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_LIBDISK_SUPPORT=y
-CONFIG_SPL_WATCHDOG_SUPPORT=y
-CONFIG_VIDEO=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,SPL,MX6Q"
-CONFIG_BOOTDELAY=3
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
-CONFIG_SPL=y
-CONFIG_SPL_EXT_SUPPORT=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PCI=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_MX6=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_CI_UDC=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="FSL"
-CONFIG_G_DNL_VENDOR_NUM=0x0525
-CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
-# CONFIG_VIDEO_SW_CURSOR is not set
-CONFIG_OF_LIBFDT=y
-CONFIG_SYS_I2C_MXC=y
-CONFIG_FEC_MXC=y
diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h
index 4f6bb1b..df3ab6e 100644
--- a/include/configs/mx6sabresd.h
+++ b/include/configs/mx6sabresd.h
@@ -51,34 +51,11 @@
 #define CONFIG_PCIE_IMX_POWER_GPIO	IMX_GPIO_NR(3, 19)
 #endif
 
-/* I2C Configs */
-#if defined(CONFIG_SYS_I2C_MXC) && !defined(CONFIG_DM_I2C)
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
-#define CONFIG_SYS_I2C_SPEED		  100000
-#endif
-
-/* PMIC */
-#ifndef CONFIG_DM_PMIC_PFUZE100
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_PFUZE100
-#define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08
-#endif
-
 /* USB Configs */
 #ifdef CONFIG_USB_EHCI_MX6
 #define CONFIG_USB_HOST_ETHER
 #define CONFIG_USB_ETHER_ASIX
 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
-
-# ifndef CONFIG_DM_USB
-#  define CONFIG_MXC_USB_FLAGS		0
-#  define CONFIG_USB_MAX_CONTROLLER_COUNT	1 /* Enabled USB controller number */
-#  define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-# endif
 #endif
 
 #endif                         /* __MX6QSABRESD_CONFIG_H */
