Message ID | 1481098837-1248-2-git-send-email-yangbo.lu@nxp.com |
---|---|
State | Superseded |
Delegated to: | York Sun |
Headers | show |
On 12/07/2016 12:34 AM, Yangbo Lu wrote: > The LS1012AQDS board has a hardware issue. When there is no eMMC > adapter card inserted, the command inhibit bits of eSDHC_PRSSTAT > register will never release. This would cause below continious > error messages in linux since it uses polling mode to detect card. > "mmc1: Controller never released inhibit bit(s)." > "mmc1: Controller never released inhibit bit(s)." > "mmc1: Controller never released inhibit bit(s)." > This patch is to define esdhc_status_fixup function to disable eSDHC2 > status if no eMMC adapter card is detected. > > Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> > --- > board/freescale/ls1012aqds/ls1012aqds.c | 19 +++++++++++++++++++ > 1 file changed, 19 insertions(+) > > diff --git a/board/freescale/ls1012aqds/ls1012aqds.c b/board/freescale/ls1012aqds/ls1012aqds.c > index 94440b3..a3229f7 100644 > --- a/board/freescale/ls1012aqds/ls1012aqds.c > +++ b/board/freescale/ls1012aqds/ls1012aqds.c > @@ -121,6 +121,25 @@ int board_eth_init(bd_t *bis) > return pci_eth_init(bis); > } > > +int esdhc_status_fixup(void *blob, const char *compat) > +{ > + char esdhc0_path[] = "/soc/esdhc@1560000"; > + char esdhc1_path[] = "/soc/esdhc@1580000"; > + u8 card_id; > + > + do_fixup_by_path(blob, esdhc0_path, "status", "okay", > + sizeof("okay"), 1); > + This controller is always "okay", isn't it? > + card_id = (QIXIS_READ(present2) & 0xe0) >> 5; > + > + if (card_id == 0x7) Please put a comment here to explain what present2 has and what 0x7 is. > + do_fixup_by_path(blob, esdhc1_path, "status", "disabled", > + sizeof("disabled"), 1); > + else > + do_fixup_by_path(blob, esdhc1_path, "status", "okay", > + sizeof("okay"), 1); > +} > + York
> -----Original Message----- > From: york sun > Sent: Thursday, December 08, 2016 12:03 AM > To: Y.B. Lu; u-boot@lists.denx.de > Subject: Re: [PATCH 2/2] armv8: ls1012a: define esdhc_status_fixup for > QDS board > > On 12/07/2016 12:34 AM, Yangbo Lu wrote: > > The LS1012AQDS board has a hardware issue. When there is no eMMC > > adapter card inserted, the command inhibit bits of eSDHC_PRSSTAT > > register will never release. This would cause below continious error > > messages in linux since it uses polling mode to detect card. > > "mmc1: Controller never released inhibit bit(s)." > > "mmc1: Controller never released inhibit bit(s)." > > "mmc1: Controller never released inhibit bit(s)." > > This patch is to define esdhc_status_fixup function to disable eSDHC2 > > status if no eMMC adapter card is detected. > > > > Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> > > --- > > board/freescale/ls1012aqds/ls1012aqds.c | 19 +++++++++++++++++++ > > 1 file changed, 19 insertions(+) > > > > diff --git a/board/freescale/ls1012aqds/ls1012aqds.c > > b/board/freescale/ls1012aqds/ls1012aqds.c > > index 94440b3..a3229f7 100644 > > --- a/board/freescale/ls1012aqds/ls1012aqds.c > > +++ b/board/freescale/ls1012aqds/ls1012aqds.c > > @@ -121,6 +121,25 @@ int board_eth_init(bd_t *bis) > > return pci_eth_init(bis); > > } > > > > +int esdhc_status_fixup(void *blob, const char *compat) { > > + char esdhc0_path[] = "/soc/esdhc@1560000"; > > + char esdhc1_path[] = "/soc/esdhc@1580000"; > > + u8 card_id; > > + > > + do_fixup_by_path(blob, esdhc0_path, "status", "okay", > > + sizeof("okay"), 1); > > + > > This controller is always "okay", isn't it? [Lu Yangbo-B47093] Yes. Only sdhc2 has issue. I will emphasize it's sdhc2 in commit message. > > > + card_id = (QIXIS_READ(present2) & 0xe0) >> 5; > > + > > + if (card_id == 0x7) > > Please put a comment here to explain what present2 has and what 0x7 is. [Lu Yangbo-B47093] No problem, thanks. Will send the v2. > > > + do_fixup_by_path(blob, esdhc1_path, "status", "disabled", > > + sizeof("disabled"), 1); > > + else > > + do_fixup_by_path(blob, esdhc1_path, "status", "okay", > > + sizeof("okay"), 1); > > +} > > + > > York
diff --git a/board/freescale/ls1012aqds/ls1012aqds.c b/board/freescale/ls1012aqds/ls1012aqds.c index 94440b3..a3229f7 100644 --- a/board/freescale/ls1012aqds/ls1012aqds.c +++ b/board/freescale/ls1012aqds/ls1012aqds.c @@ -121,6 +121,25 @@ int board_eth_init(bd_t *bis) return pci_eth_init(bis); } +int esdhc_status_fixup(void *blob, const char *compat) +{ + char esdhc0_path[] = "/soc/esdhc@1560000"; + char esdhc1_path[] = "/soc/esdhc@1580000"; + u8 card_id; + + do_fixup_by_path(blob, esdhc0_path, "status", "okay", + sizeof("okay"), 1); + + card_id = (QIXIS_READ(present2) & 0xe0) >> 5; + + if (card_id == 0x7) + do_fixup_by_path(blob, esdhc1_path, "status", "disabled", + sizeof("disabled"), 1); + else + do_fixup_by_path(blob, esdhc1_path, "status", "okay", + sizeof("okay"), 1); +} + #ifdef CONFIG_OF_BOARD_SETUP int ft_board_setup(void *blob, bd_t *bd) {
The LS1012AQDS board has a hardware issue. When there is no eMMC adapter card inserted, the command inhibit bits of eSDHC_PRSSTAT register will never release. This would cause below continious error messages in linux since it uses polling mode to detect card. "mmc1: Controller never released inhibit bit(s)." "mmc1: Controller never released inhibit bit(s)." "mmc1: Controller never released inhibit bit(s)." This patch is to define esdhc_status_fixup function to disable eSDHC2 status if no eMMC adapter card is detected. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> --- board/freescale/ls1012aqds/ls1012aqds.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)