@@ -242,8 +242,8 @@ config TARGET_T1042RDB_PI
select SUPPORT_SPL
select PHYS_64BIT
-config TARGET_T208XQDS
- bool "Support T208xQDS"
+config TARGET_T2080QDS
+ bool "Support T2080QDS"
select SUPPORT_SPL
select PHYS_64BIT
@@ -252,6 +252,11 @@ config TARGET_T208XRDB
select SUPPORT_SPL
select PHYS_64BIT
+config TARGET_T2081QDS
+ bool "Support T2081QDS"
+ select SUPPORT_SPL
+ select PHYS_64BIT
+
config TARGET_T4240QDS
bool "Support T4240QDS"
select SUPPORT_SPL
@@ -1,4 +1,4 @@
-if TARGET_T208XQDS
+if TARGET_T2080QDS || TARGET_T2081QDS
config SYS_BOARD
default "t208xqds"
@@ -7,7 +7,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_MPC85xx=y
-CONFIG_TARGET_T208XQDS=y
+CONFIG_TARGET_T2080QDS=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
@@ -7,7 +7,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_MPC85xx=y
-CONFIG_TARGET_T208XQDS=y
+CONFIG_TARGET_T2080QDS=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
@@ -1,6 +1,6 @@
CONFIG_PPC=y
CONFIG_MPC85xx=y
-CONFIG_TARGET_T208XQDS=y
+CONFIG_TARGET_T2080QDS=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
@@ -8,7 +8,7 @@ CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_MPC85xx=y
-CONFIG_TARGET_T208XQDS=y
+CONFIG_TARGET_T2080QDS=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
@@ -1,6 +1,6 @@
CONFIG_PPC=y
CONFIG_MPC85xx=y
-CONFIG_TARGET_T208XQDS=y
+CONFIG_TARGET_T2080QDS=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
@@ -1,6 +1,6 @@
CONFIG_PPC=y
CONFIG_MPC85xx=y
-CONFIG_TARGET_T208XQDS=y
+CONFIG_TARGET_T2080QDS=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
@@ -7,7 +7,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_MPC85xx=y
-CONFIG_TARGET_T208XQDS=y
+CONFIG_TARGET_T2081QDS=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
@@ -7,7 +7,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_MPC85xx=y
-CONFIG_TARGET_T208XQDS=y
+CONFIG_TARGET_T2081QDS=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
@@ -8,7 +8,7 @@ CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_MPC85xx=y
-CONFIG_TARGET_T208XQDS=y
+CONFIG_TARGET_T2081QDS=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
@@ -1,6 +1,6 @@
CONFIG_PPC=y
CONFIG_MPC85xx=y
-CONFIG_TARGET_T208XQDS=y
+CONFIG_TARGET_T2081QDS=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
@@ -1,6 +1,6 @@
CONFIG_PPC=y
CONFIG_MPC85xx=y
-CONFIG_TARGET_T208XQDS=y
+CONFIG_TARGET_T2081QDS=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
Use two separated targets in Kconfig to simplify configurations. Signed-off-by: York Sun <york.sun@nxp.com> --- arch/powerpc/cpu/mpc85xx/Kconfig | 9 +++++++-- board/freescale/t208xqds/Kconfig | 2 +- configs/T2080QDS_NAND_defconfig | 2 +- configs/T2080QDS_SDCARD_defconfig | 2 +- configs/T2080QDS_SECURE_BOOT_defconfig | 2 +- configs/T2080QDS_SPIFLASH_defconfig | 2 +- configs/T2080QDS_SRIO_PCIE_BOOT_defconfig | 2 +- configs/T2080QDS_defconfig | 2 +- configs/T2081QDS_NAND_defconfig | 2 +- configs/T2081QDS_SDCARD_defconfig | 2 +- configs/T2081QDS_SPIFLASH_defconfig | 2 +- configs/T2081QDS_SRIO_PCIE_BOOT_defconfig | 2 +- configs/T2081QDS_defconfig | 2 +- 13 files changed, 19 insertions(+), 14 deletions(-)