Message ID | 1477847942-20347-2-git-send-email-eric@nelint.com |
---|---|
State | Accepted |
Commit | b33f74ead4dfd1ec0b500dc3d1cfef0e308b45c3 |
Delegated to: | Stefano Babic |
Headers | show |
On 10/30/2016 06:19 PM, Eric Nelson wrote: > The DDR calibration code is only setting flag DG_CMP_CYC (DQS gating sample > cycle) for the first PHY. > > Set the 32-cycle flag for both PHYs and clear when done so the MPDGCTRL0 > output value isn't polluted with calibration artifacts. > > Signed-off-by: Eric Nelson <eric@nelint.com> Reviewed-by: Marek Vasut <marex@denx.de> > --- > arch/arm/cpu/armv7/mx6/ddr.c | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/arch/arm/cpu/armv7/mx6/ddr.c b/arch/arm/cpu/armv7/mx6/ddr.c > index 7beb7ea..b15f376 100644 > --- a/arch/arm/cpu/armv7/mx6/ddr.c > +++ b/arch/arm/cpu/armv7/mx6/ddr.c > @@ -347,6 +347,8 @@ int mmdc_do_dqs_calibration(void) > * 16 before comparing read data. > */ > setbits_le32(&mmdc0->mpdgctrl0, 1 << 30); > + if (sysinfo->dsize == 2) > + setbits_le32(&mmdc1->mpdgctrl0, 1 << 30); > > /* Set bit 28 to start automatic read DQS gating calibration */ > setbits_le32(&mmdc0->mpdgctrl0, 5 << 28); > @@ -365,6 +367,11 @@ int mmdc_do_dqs_calibration(void) > if ((bus_size == 0x2) && (readl(&mmdc1->mpdgctrl0) & 0x00001000)) > errors |= 2; > > + /* now disable mpdgctrl0[DG_CMP_CYC] */ > + clrbits_le32(&mmdc0->mpdgctrl0, 1 << 30); > + if (sysinfo->dsize == 2) > + clrbits_le32(&mmdc1->mpdgctrl0, 1 << 30); > + > /* > * DQS gating absolute offset should be modified from > * reflecting (HW_DG_LOWx + HW_DG_UPx)/2 to >
diff --git a/arch/arm/cpu/armv7/mx6/ddr.c b/arch/arm/cpu/armv7/mx6/ddr.c index 7beb7ea..b15f376 100644 --- a/arch/arm/cpu/armv7/mx6/ddr.c +++ b/arch/arm/cpu/armv7/mx6/ddr.c @@ -347,6 +347,8 @@ int mmdc_do_dqs_calibration(void) * 16 before comparing read data. */ setbits_le32(&mmdc0->mpdgctrl0, 1 << 30); + if (sysinfo->dsize == 2) + setbits_le32(&mmdc1->mpdgctrl0, 1 << 30); /* Set bit 28 to start automatic read DQS gating calibration */ setbits_le32(&mmdc0->mpdgctrl0, 5 << 28); @@ -365,6 +367,11 @@ int mmdc_do_dqs_calibration(void) if ((bus_size == 0x2) && (readl(&mmdc1->mpdgctrl0) & 0x00001000)) errors |= 2; + /* now disable mpdgctrl0[DG_CMP_CYC] */ + clrbits_le32(&mmdc0->mpdgctrl0, 1 << 30); + if (sysinfo->dsize == 2) + clrbits_le32(&mmdc1->mpdgctrl0, 1 << 30); + /* * DQS gating absolute offset should be modified from * reflecting (HW_DG_LOWx + HW_DG_UPx)/2 to
The DDR calibration code is only setting flag DG_CMP_CYC (DQS gating sample cycle) for the first PHY. Set the 32-cycle flag for both PHYs and clear when done so the MPDGCTRL0 output value isn't polluted with calibration artifacts. Signed-off-by: Eric Nelson <eric@nelint.com> --- arch/arm/cpu/armv7/mx6/ddr.c | 7 +++++++ 1 file changed, 7 insertions(+)