@@ -495,6 +495,7 @@ void mx6_dram_cfg(const struct mx6_ddr_sysinfo *,
#define MX6_MMDC_P0_MPDGCTRL1 0x021b0840
#define MX6_MMDC_P0_MPRDDLCTL 0x021b0848
#define MX6_MMDC_P0_MPWRDLCTL 0x021b0850
+#define MX6_MMDC_P0_MPZQLP2CTL 0x021b085C
#define MX6_MMDC_P0_MPMUR0 0x021b08b8
#define MX6_MMDC_P1_MDCTL 0x021b4000
@@ -522,6 +523,7 @@ void mx6_dram_cfg(const struct mx6_ddr_sysinfo *,
#define MX6_MMDC_P1_MPDGCTRL1 0x021b4840
#define MX6_MMDC_P1_MPRDDLCTL 0x021b4848
#define MX6_MMDC_P1_MPWRDLCTL 0x021b4850
+#define MX6_MMDC_P1_MPZQLP2CTL 0x021b485C
#define MX6_MMDC_P1_MPMUR0 0x021b48b8
#endif /*__ASM_ARCH_MX6_DDR_H__ */
Add constants for the MPZQLP2CTL DDR register for both banks to allow setting the LPDDR2 timing values in .cfg files using a named constant instead of hex addresses as is currently done in mx6slevk and other board files. Signed-off-by: Eric Nelson <eric@nelint.com> --- arch/arm/include/asm/arch-mx6/mx6-ddr.h | 2 ++ 1 file changed, 2 insertions(+)