diff mbox

[U-Boot,v2,7/7] imx6: icorem6: Add I2C support

Message ID 1477663067-20911-8-git-send-email-jagan@openedev.com
State Changes Requested
Delegated to: Stefano Babic
Headers show

Commit Message

Jagan Teki Oct. 28, 2016, 1:57 p.m. UTC 
From: Jagan Teki <jagan@amarulasolutions.com>

Add I2C support for Engicam i.CoreM6 qdl board.

icorem6qdl> i2c bus
Bus 0:  i2c@021a0000
Bus 1:  i2c@021a4000
Bus 2:  i2c@021a8000
icorem6qdl> i2c dev 2
Setting bus to 2
icorem6qdl> i2c speed 100000
Setting bus speed to 100000 Hz
icorem6qdl> i2c probe
Valid chip addresses: 2C
icorem6qdl> i2c md 2C 0xff
00ff: 00 00 00 00 0f f0 01 64 ff ff 00 00 00 00 00 00    .......d........

Cc: Stefano Babic <sbabic@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 arch/arm/cpu/armv7/mx6/Kconfig       | 1 +
 configs/imx6qdl_icore_mmc_defconfig  | 3 ++-
 configs/imx6qdl_icore_nand_defconfig | 3 ++-
 3 files changed, 5 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/cpu/armv7/mx6/Kconfig b/arch/arm/cpu/armv7/mx6/Kconfig
index 8456b0e..c04536c 100644
--- a/arch/arm/cpu/armv7/mx6/Kconfig
+++ b/arch/arm/cpu/armv7/mx6/Kconfig
@@ -102,6 +102,7 @@  config TARGET_MX6Q_ICORE
 	select DM
 	select DM_ETH
 	select DM_GPIO
+	select DM_I2C
 	select DM_MMC
 	select DM_THERMAL
 	select SUPPORT_SPL
diff --git a/configs/imx6qdl_icore_mmc_defconfig b/configs/imx6qdl_icore_mmc_defconfig
index e530fad..396cd53 100644
--- a/configs/imx6qdl_icore_mmc_defconfig
+++ b/configs/imx6qdl_icore_mmc_defconfig
@@ -17,6 +17,7 @@  CONFIG_SYS_MAXARGS=32
 # CONFIG_DM_MMC_OPS is not set
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_MEMTEST=y
@@ -33,13 +34,13 @@  CONFIG_MXC_UART=y
 CONFIG_IMX_THERMAL=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX6=y
+CONFIG_SYS_I2C_MXC=y
 CONFIG_VIDEO=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_WATCHDOG_SUPPORT=y
 CONFIG_SPL_EXT_SUPPORT=y
diff --git a/configs/imx6qdl_icore_nand_defconfig b/configs/imx6qdl_icore_nand_defconfig
index e50b4c4..5de607c 100644
--- a/configs/imx6qdl_icore_nand_defconfig
+++ b/configs/imx6qdl_icore_nand_defconfig
@@ -15,6 +15,7 @@  CONFIG_SYS_MAXARGS=32
 # CONFIG_CMD_IMLS is not set
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_MEMTEST=y
@@ -29,12 +30,12 @@  CONFIG_IMX_THERMAL=y
 # CONFIG_DM_MMC_OPS is not set
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX6=y
+CONFIG_SYS_I2C_MXC=y
 CONFIG_VIDEO=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_WATCHDOG_SUPPORT=y
 CONFIG_SPL_DMA_SUPPORT=y