@@ -9,6 +9,7 @@ CONFIG_FIT_SIGNATURE=y
CONFIG_BOOTDELAY=3
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Zynq> "
+CONFIG_SYS_NO_FLASH=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_MMC=y
@@ -6,6 +6,7 @@ CONFIG_SPL=y
CONFIG_BOOTDELAY=3
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Zynq> "
+CONFIG_SYS_NO_FLASH=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_MMC=y
@@ -9,6 +9,7 @@ CONFIG_FIT_SIGNATURE=y
CONFIG_BOOTDELAY=3
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Zynq> "
+CONFIG_SYS_NO_FLASH=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_MMC=y
@@ -9,6 +9,7 @@ CONFIG_FIT_SIGNATURE=y
CONFIG_BOOTDELAY=3
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Zynq> "
+CONFIG_SYS_NO_FLASH=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_MMC=y
@@ -10,6 +10,7 @@ CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM010"
CONFIG_BOOTDELAY=3
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Zynq> "
+CONFIG_SYS_NO_FLASH=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_MMC=y
@@ -10,6 +10,7 @@ CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM011"
CONFIG_BOOTDELAY=3
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Zynq> "
+CONFIG_SYS_NO_FLASH=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
@@ -10,6 +10,7 @@ CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM013"
CONFIG_BOOTDELAY=3
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Zynq> "
+CONFIG_SYS_NO_FLASH=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
@@ -9,6 +9,7 @@ CONFIG_FIT_SIGNATURE=y
CONFIG_BOOTDELAY=3
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Zynq> "
+CONFIG_SYS_NO_FLASH=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_MMC=y
@@ -9,6 +9,7 @@ CONFIG_FIT_SIGNATURE=y
CONFIG_BOOTDELAY=3
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Zynq> "
+CONFIG_SYS_NO_FLASH=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_MMC=y
@@ -10,8 +10,6 @@
#ifndef __CONFIG_ZYNQ_MICROZED_H
#define __CONFIG_ZYNQ_MICROZED_H
-#define CONFIG_SYS_NO_FLASH
-
#include <configs/zynq-common.h>
#endif /* __CONFIG_ZYNQ_MICROZED_H */
@@ -10,8 +10,6 @@
#ifndef __CONFIG_ZYNQ_PICOZED_H
#define __CONFIG_ZYNQ_PICOZED_H
-#define CONFIG_SYS_NO_FLASH
-
#include <configs/zynq-common.h>
#endif /* __CONFIG_ZYNQ_PICOZED_H */
@@ -10,8 +10,6 @@
#ifndef __CONFIG_ZYNQ_ZC70X_H
#define __CONFIG_ZYNQ_ZC70X_H
-#define CONFIG_SYS_NO_FLASH
-
#define CONFIG_ZYNQ_I2C0
#define CONFIG_ZYNQ_EEPROM
@@ -10,13 +10,6 @@
#ifndef __CONFIG_ZYNQ_ZC770_H
#define __CONFIG_ZYNQ_ZC770_H
-#define CONFIG_SYS_NO_FLASH
-
-#if defined(CONFIG_ZC770_XM012)
-# undef CONFIG_SYS_NO_FLASH
-
-#endif
-
#include <configs/zynq-common.h>
#endif /* __CONFIG_ZYNQ_ZC770_H */
@@ -10,8 +10,6 @@
#ifndef __CONFIG_ZYNQ_ZED_H
#define __CONFIG_ZYNQ_ZED_H
-#define CONFIG_SYS_NO_FLASH
-
#include <configs/zynq-common.h>
#endif /* __CONFIG_ZYNQ_ZED_H */
@@ -11,8 +11,6 @@
#ifndef __CONFIG_ZYNQ_ZYBO_H
#define __CONFIG_ZYNQ_ZYBO_H
-#define CONFIG_SYS_NO_FLASH
-
#define CONFIG_ZYNQ_I2C0
#define CONFIG_ZYNQ_I2C1
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
Enable config CONFIG_SYS_NO_FLASH through defconfig for all zynq boards. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> --- Changes for v2: - None --- configs/zynq_microzed_defconfig | 1 + configs/zynq_picozed_defconfig | 1 + configs/zynq_zc702_defconfig | 1 + configs/zynq_zc706_defconfig | 1 + configs/zynq_zc770_xm010_defconfig | 1 + configs/zynq_zc770_xm011_defconfig | 1 + configs/zynq_zc770_xm013_defconfig | 1 + configs/zynq_zed_defconfig | 1 + configs/zynq_zybo_defconfig | 1 + include/configs/zynq_microzed.h | 2 -- include/configs/zynq_picozed.h | 2 -- include/configs/zynq_zc70x.h | 2 -- include/configs/zynq_zc770.h | 7 ------- include/configs/zynq_zed.h | 2 -- include/configs/zynq_zybo.h | 2 -- 15 files changed, 9 insertions(+), 17 deletions(-)