Message ID | 1461536404-14669-1-git-send-email-angelo@sysam.it |
---|---|
State | Superseded |
Delegated to: | Simon Glass |
Headers | show |
Hi Simon, noticed just after sending the patch an issue with my tests, please freeze the patch, there are possible issues in it. Will confirm this v3 in case after re-testing or will issue a v4. thanks, regards, Angelo Dureghello On 25/04/2016 00:20, Angelo Dureghello wrote: > To use serial uclass and DM, CONFIG_SYS_MALLOC_F must be used. > So CONFIG_SYS_GENERIC_GLOBAL_DATA has been undefined and > call to board_init_f_mem() is added for all cpu's. > > Signed-off-by: Angelo Dureghello <angelo@sysam.it> > > --- > Changes for v2: > - none > Changes for v3: > - fix start.S using new board_init_f_alloc_reserve > --- > arch/m68k/cpu/mcf5227x/start.S | 16 ++++++++++++++++ > arch/m68k/cpu/mcf523x/start.S | 16 ++++++++++++++++ > arch/m68k/cpu/mcf52x2/start.S | 16 ++++++++++++++++ > arch/m68k/cpu/mcf530x/cpu_init.c | 2 +- > arch/m68k/cpu/mcf530x/start.S | 16 ++++++++++++++++ > arch/m68k/cpu/mcf532x/start.S | 16 ++++++++++++++++ > arch/m68k/cpu/mcf5445x/start.S | 16 ++++++++++++++++ > arch/m68k/cpu/mcf547x_8x/start.S | 16 ++++++++++++++++ > 8 files changed, 113 insertions(+), 1 deletion(-) > > diff --git a/arch/m68k/cpu/mcf5227x/start.S b/arch/m68k/cpu/mcf5227x/start.S > index 23024f9..ea36020 100644 > --- a/arch/m68k/cpu/mcf5227x/start.S > +++ b/arch/m68k/cpu/mcf5227x/start.S > @@ -379,6 +379,22 @@ _start: > > move.l #__got_start, %a5 /* put relocation table address to a5 */ > > +#if defined(CONFIG_SYS_MALLOC_F) > + move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp > + > + /* allocate reserved area from current top of stack */ > + move.l %sp, -(%sp) > + bsr board_init_f_alloc_reserve > + > + /* update stack and frame-pointers */ > + move.l %d0, %sp > + move.l %sp, %fp > + > + /* initialize reserved area */ > + move.l %d0, -(%sp) > + bsr board_init_f_init_reserve > +#endif > + > bsr cpu_init_f /* run low-level CPU init code (from flash) */ > bsr board_init_f /* run low-level board init code (from flash) */ > > diff --git a/arch/m68k/cpu/mcf523x/start.S b/arch/m68k/cpu/mcf523x/start.S > index 1702f98..db1cb11 100644 > --- a/arch/m68k/cpu/mcf523x/start.S > +++ b/arch/m68k/cpu/mcf523x/start.S > @@ -141,6 +141,22 @@ _start: > > move.l #__got_start, %a5 /* put relocation table address to a5 */ > > +#if defined(CONFIG_SYS_MALLOC_F) > + move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp > + > + /* allocate reserved area from current top of stack */ > + move.l %sp, -(%sp) > + bsr board_init_f_alloc_reserve > + > + /* update stack and frame-pointers */ > + move.l %d0, %sp > + move.l %sp, %fp > + > + /* initialize reserved area */ > + move.l %d0, -(%sp) > + bsr board_init_f_init_reserve > +#endif > + > /* run low-level CPU init code (from flash) */ > move.l #cpu_init_f, %a1 > jsr (%a1) > diff --git a/arch/m68k/cpu/mcf52x2/start.S b/arch/m68k/cpu/mcf52x2/start.S > index 4af691f..e60d51e 100644 > --- a/arch/m68k/cpu/mcf52x2/start.S > +++ b/arch/m68k/cpu/mcf52x2/start.S > @@ -198,6 +198,22 @@ _after_flashbar_copy: > > move.l #__got_start, %a5 /* put relocation table address to a5 */ > > +#if defined(CONFIG_SYS_MALLOC_F) > + move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp > + > + /* allocate reserved area from current top of stack */ > + move.l %sp, -(%sp) > + bsr board_init_f_alloc_reserve > + > + /* update stack and frame-pointers */ > + move.l %d0, %sp > + move.l %sp, %fp > + > + /* initialize reserved area */ > + move.l %d0, -(%sp) > + bsr board_init_f_init_reserve > +#endif > + > /* run low-level CPU init code (from flash) */ > move.l #cpu_init_f, %a1 > jsr (%a1) > diff --git a/arch/m68k/cpu/mcf530x/cpu_init.c b/arch/m68k/cpu/mcf530x/cpu_init.c > index 80dc239..b09eed8 100644 > --- a/arch/m68k/cpu/mcf530x/cpu_init.c > +++ b/arch/m68k/cpu/mcf530x/cpu_init.c > @@ -142,7 +142,7 @@ int cpu_init_r(void) > return 0; > } > > -void uart_port_conf(void) > +void uart_port_conf(int port) > { > } > > diff --git a/arch/m68k/cpu/mcf530x/start.S b/arch/m68k/cpu/mcf530x/start.S > index 097958a..9740b59 100644 > --- a/arch/m68k/cpu/mcf530x/start.S > +++ b/arch/m68k/cpu/mcf530x/start.S > @@ -137,6 +137,22 @@ _start: > /* put relocation table address to a5 */ > move.l #__got_start, %a5 > > +#if defined(CONFIG_SYS_MALLOC_F) > + move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp > + > + /* allocate reserved area from current top of stack */ > + move.l %sp, -(%sp) > + bsr board_init_f_alloc_reserve > + > + /* update stack and frame-pointers */ > + move.l %d0, %sp > + move.l %sp, %fp > + > + /* initialize reserved area */ > + move.l %d0, -(%sp) > + bsr board_init_f_init_reserve > +#endif > + > /* run low-level CPU init code (from flash) */ > bsr cpu_init_f > > diff --git a/arch/m68k/cpu/mcf532x/start.S b/arch/m68k/cpu/mcf532x/start.S > index 131ad6e..558c8d5 100644 > --- a/arch/m68k/cpu/mcf532x/start.S > +++ b/arch/m68k/cpu/mcf532x/start.S > @@ -155,6 +155,22 @@ _start: > > move.l #__got_start, %a5 /* put relocation table address to a5 */ > > +#if defined(CONFIG_SYS_MALLOC_F) > + move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp > + > + /* allocate reserved area from current top of stack */ > + move.l %sp, -(%sp) > + bsr board_init_f_alloc_reserve > + > + /* update stack and frame-pointers */ > + move.l %d0, %sp > + move.l %sp, %fp > + > + /* initialize reserved area */ > + move.l %d0, -(%sp) > + bsr board_init_f_init_reserve > +#endif > + > /* run low-level CPU init code (from flash) */ > move.l #cpu_init_f, %a1 > jsr (%a1) > diff --git a/arch/m68k/cpu/mcf5445x/start.S b/arch/m68k/cpu/mcf5445x/start.S > index f50f147..49c8d30 100644 > --- a/arch/m68k/cpu/mcf5445x/start.S > +++ b/arch/m68k/cpu/mcf5445x/start.S > @@ -664,6 +664,22 @@ _start: > > move.l #__got_start, %a5 /* put relocation table address to a5 */ > > +#if defined(CONFIG_SYS_MALLOC_F) > + move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp > + > + /* allocate reserved area from current top of stack */ > + move.l %sp, -(%sp) > + bsr board_init_f_alloc_reserve > + > + /* update stack and frame-pointers */ > + move.l %d0, %sp > + move.l %sp, %fp > + > + /* initialize reserved area */ > + move.l %d0, -(%sp) > + bsr board_init_f_init_reserve > +#endif > + > /* run low-level CPU init code (from flash) */ > move.l #cpu_init_f, %a1 > jsr (%a1) > diff --git a/arch/m68k/cpu/mcf547x_8x/start.S b/arch/m68k/cpu/mcf547x_8x/start.S > index 75de22d..34cfbf0 100644 > --- a/arch/m68k/cpu/mcf547x_8x/start.S > +++ b/arch/m68k/cpu/mcf547x_8x/start.S > @@ -148,6 +148,22 @@ _start: > > move.l #__got_start, %a5 /* put relocation table address to a5 */ > > +#if defined(CONFIG_SYS_MALLOC_F) > + move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp > + > + /* allocate reserved area from current top of stack */ > + move.l %sp, -(%sp) > + bsr board_init_f_alloc_reserve > + > + /* update stack and frame-pointers */ > + move.l %d0, %sp > + move.l %sp, %fp > + > + /* initialize reserved area */ > + move.l %d0, -(%sp) > + bsr board_init_f_init_reserve > +#endif > + > jbsr cpu_init_f /* run low-level CPU init code (from flash) */ > jbsr board_init_f /* run low-level board init code (from flash) */ > >
diff --git a/arch/m68k/cpu/mcf5227x/start.S b/arch/m68k/cpu/mcf5227x/start.S index 23024f9..ea36020 100644 --- a/arch/m68k/cpu/mcf5227x/start.S +++ b/arch/m68k/cpu/mcf5227x/start.S @@ -379,6 +379,22 @@ _start: move.l #__got_start, %a5 /* put relocation table address to a5 */ +#if defined(CONFIG_SYS_MALLOC_F) + move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp + + /* allocate reserved area from current top of stack */ + move.l %sp, -(%sp) + bsr board_init_f_alloc_reserve + + /* update stack and frame-pointers */ + move.l %d0, %sp + move.l %sp, %fp + + /* initialize reserved area */ + move.l %d0, -(%sp) + bsr board_init_f_init_reserve +#endif + bsr cpu_init_f /* run low-level CPU init code (from flash) */ bsr board_init_f /* run low-level board init code (from flash) */ diff --git a/arch/m68k/cpu/mcf523x/start.S b/arch/m68k/cpu/mcf523x/start.S index 1702f98..db1cb11 100644 --- a/arch/m68k/cpu/mcf523x/start.S +++ b/arch/m68k/cpu/mcf523x/start.S @@ -141,6 +141,22 @@ _start: move.l #__got_start, %a5 /* put relocation table address to a5 */ +#if defined(CONFIG_SYS_MALLOC_F) + move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp + + /* allocate reserved area from current top of stack */ + move.l %sp, -(%sp) + bsr board_init_f_alloc_reserve + + /* update stack and frame-pointers */ + move.l %d0, %sp + move.l %sp, %fp + + /* initialize reserved area */ + move.l %d0, -(%sp) + bsr board_init_f_init_reserve +#endif + /* run low-level CPU init code (from flash) */ move.l #cpu_init_f, %a1 jsr (%a1) diff --git a/arch/m68k/cpu/mcf52x2/start.S b/arch/m68k/cpu/mcf52x2/start.S index 4af691f..e60d51e 100644 --- a/arch/m68k/cpu/mcf52x2/start.S +++ b/arch/m68k/cpu/mcf52x2/start.S @@ -198,6 +198,22 @@ _after_flashbar_copy: move.l #__got_start, %a5 /* put relocation table address to a5 */ +#if defined(CONFIG_SYS_MALLOC_F) + move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp + + /* allocate reserved area from current top of stack */ + move.l %sp, -(%sp) + bsr board_init_f_alloc_reserve + + /* update stack and frame-pointers */ + move.l %d0, %sp + move.l %sp, %fp + + /* initialize reserved area */ + move.l %d0, -(%sp) + bsr board_init_f_init_reserve +#endif + /* run low-level CPU init code (from flash) */ move.l #cpu_init_f, %a1 jsr (%a1) diff --git a/arch/m68k/cpu/mcf530x/cpu_init.c b/arch/m68k/cpu/mcf530x/cpu_init.c index 80dc239..b09eed8 100644 --- a/arch/m68k/cpu/mcf530x/cpu_init.c +++ b/arch/m68k/cpu/mcf530x/cpu_init.c @@ -142,7 +142,7 @@ int cpu_init_r(void) return 0; } -void uart_port_conf(void) +void uart_port_conf(int port) { } diff --git a/arch/m68k/cpu/mcf530x/start.S b/arch/m68k/cpu/mcf530x/start.S index 097958a..9740b59 100644 --- a/arch/m68k/cpu/mcf530x/start.S +++ b/arch/m68k/cpu/mcf530x/start.S @@ -137,6 +137,22 @@ _start: /* put relocation table address to a5 */ move.l #__got_start, %a5 +#if defined(CONFIG_SYS_MALLOC_F) + move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp + + /* allocate reserved area from current top of stack */ + move.l %sp, -(%sp) + bsr board_init_f_alloc_reserve + + /* update stack and frame-pointers */ + move.l %d0, %sp + move.l %sp, %fp + + /* initialize reserved area */ + move.l %d0, -(%sp) + bsr board_init_f_init_reserve +#endif + /* run low-level CPU init code (from flash) */ bsr cpu_init_f diff --git a/arch/m68k/cpu/mcf532x/start.S b/arch/m68k/cpu/mcf532x/start.S index 131ad6e..558c8d5 100644 --- a/arch/m68k/cpu/mcf532x/start.S +++ b/arch/m68k/cpu/mcf532x/start.S @@ -155,6 +155,22 @@ _start: move.l #__got_start, %a5 /* put relocation table address to a5 */ +#if defined(CONFIG_SYS_MALLOC_F) + move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp + + /* allocate reserved area from current top of stack */ + move.l %sp, -(%sp) + bsr board_init_f_alloc_reserve + + /* update stack and frame-pointers */ + move.l %d0, %sp + move.l %sp, %fp + + /* initialize reserved area */ + move.l %d0, -(%sp) + bsr board_init_f_init_reserve +#endif + /* run low-level CPU init code (from flash) */ move.l #cpu_init_f, %a1 jsr (%a1) diff --git a/arch/m68k/cpu/mcf5445x/start.S b/arch/m68k/cpu/mcf5445x/start.S index f50f147..49c8d30 100644 --- a/arch/m68k/cpu/mcf5445x/start.S +++ b/arch/m68k/cpu/mcf5445x/start.S @@ -664,6 +664,22 @@ _start: move.l #__got_start, %a5 /* put relocation table address to a5 */ +#if defined(CONFIG_SYS_MALLOC_F) + move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp + + /* allocate reserved area from current top of stack */ + move.l %sp, -(%sp) + bsr board_init_f_alloc_reserve + + /* update stack and frame-pointers */ + move.l %d0, %sp + move.l %sp, %fp + + /* initialize reserved area */ + move.l %d0, -(%sp) + bsr board_init_f_init_reserve +#endif + /* run low-level CPU init code (from flash) */ move.l #cpu_init_f, %a1 jsr (%a1) diff --git a/arch/m68k/cpu/mcf547x_8x/start.S b/arch/m68k/cpu/mcf547x_8x/start.S index 75de22d..34cfbf0 100644 --- a/arch/m68k/cpu/mcf547x_8x/start.S +++ b/arch/m68k/cpu/mcf547x_8x/start.S @@ -148,6 +148,22 @@ _start: move.l #__got_start, %a5 /* put relocation table address to a5 */ +#if defined(CONFIG_SYS_MALLOC_F) + move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp + + /* allocate reserved area from current top of stack */ + move.l %sp, -(%sp) + bsr board_init_f_alloc_reserve + + /* update stack and frame-pointers */ + move.l %d0, %sp + move.l %sp, %fp + + /* initialize reserved area */ + move.l %d0, -(%sp) + bsr board_init_f_init_reserve +#endif + jbsr cpu_init_f /* run low-level CPU init code (from flash) */ jbsr board_init_f /* run low-level board init code (from flash) */
To use serial uclass and DM, CONFIG_SYS_MALLOC_F must be used. So CONFIG_SYS_GENERIC_GLOBAL_DATA has been undefined and call to board_init_f_mem() is added for all cpu's. Signed-off-by: Angelo Dureghello <angelo@sysam.it> --- Changes for v2: - none Changes for v3: - fix start.S using new board_init_f_alloc_reserve --- arch/m68k/cpu/mcf5227x/start.S | 16 ++++++++++++++++ arch/m68k/cpu/mcf523x/start.S | 16 ++++++++++++++++ arch/m68k/cpu/mcf52x2/start.S | 16 ++++++++++++++++ arch/m68k/cpu/mcf530x/cpu_init.c | 2 +- arch/m68k/cpu/mcf530x/start.S | 16 ++++++++++++++++ arch/m68k/cpu/mcf532x/start.S | 16 ++++++++++++++++ arch/m68k/cpu/mcf5445x/start.S | 16 ++++++++++++++++ arch/m68k/cpu/mcf547x_8x/start.S | 16 ++++++++++++++++ 8 files changed, 113 insertions(+), 1 deletion(-)