| Message ID | 1451916090.27601.126.camel@microchip.com |
|---|---|
| State | Superseded |
| Delegated to: | Daniel Schwierzeck |
| Headers | show |
2016-01-04 15:01 GMT+01:00 Purna Chandra Mandal <purna.mandal@microchip.com>: > This adds support for Microchip PIC32MZ[DA] Starter Kit board > based on a PIC32MZ[DA] family of microcontroller. > > Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> > > --- > > Changes in v2: > - move CONFIG_SYS_TEXT_BASE (from board/<>/config.mk) to include/configs/<board>.h > > arch/mips/dts/Makefile | 2 +- > arch/mips/dts/pic32mzda_sk.dts | 38 +++++++++++++ > arch/mips/mach-pic32/Kconfig | 7 +++ > board/microchip/pic32mzda/Kconfig | 13 +++++ > board/microchip/pic32mzda/MAINTAINERS | 6 ++ > board/microchip/pic32mzda/Makefile | 7 +++ > board/microchip/pic32mzda/README | 22 ++++++++ > board/microchip/pic32mzda/pic32mzda.c | 31 +++++++++++ > configs/pic32mzdask_defconfig | 21 +++++++ > include/configs/pic32mzdask.h | 100 ++++++++++++++++++++++++++++++++++ > 10 files changed, 246 insertions(+), 1 deletion(-) > create mode 100644 arch/mips/dts/pic32mzda_sk.dts > create mode 100644 board/microchip/pic32mzda/Kconfig > create mode 100644 board/microchip/pic32mzda/MAINTAINERS > create mode 100644 board/microchip/pic32mzda/Makefile > create mode 100644 board/microchip/pic32mzda/README > create mode 100644 board/microchip/pic32mzda/pic32mzda.c > create mode 100644 configs/pic32mzdask_defconfig > create mode 100644 include/configs/pic32mzdask.h > > diff --git a/arch/mips/dts/Makefile b/arch/mips/dts/Makefile > index 47b6eb5..b513918 100644 > --- a/arch/mips/dts/Makefile > +++ b/arch/mips/dts/Makefile > @@ -2,7 +2,7 @@ > # SPDX-License-Identifier: GPL-2.0+ > # > > -dtb-y += > +dtb-$(CONFIG_TARGET_PIC32MZDASK) += pic32mzda_sk.dtb > > targets += $(dtb-y) > > diff --git a/arch/mips/dts/pic32mzda_sk.dts b/arch/mips/dts/pic32mzda_sk.dts > new file mode 100644 > index 0000000..99e7f64 > --- /dev/null > +++ b/arch/mips/dts/pic32mzda_sk.dts > @@ -0,0 +1,38 @@ > +/* > + * Copyright (C) 2015 Purna Chandra Mandal, purna.mandal@microchip.com > + * > + * SPDX-License-Identifier: GPL-2.0+ > + */ > + > +/dts-v1/; > + > +#include "pic32mzda.dtsi" > + > +/ { > + model = "Microchip PIC32MZDASK"; > + compatible = "microchip,pic32mzdask", "microchip,pic32mzda"; > + > + aliases { > + console = &uart2; > + serial0 = &uart2; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > +}; > + > +&clock { > + status = "okay"; > + u-boot,dm-pre-reloc; > +}; > + > +&pinctrl { > + status = "okay"; > + u-boot,dm-pre-reloc; > +}; > + > +&uart2 { > + status = "okay"; > + u-boot,dm-pre-reloc; > +}; > diff --git a/arch/mips/mach-pic32/Kconfig b/arch/mips/mach-pic32/Kconfig > index a394791..f357fc6 100644 > --- a/arch/mips/mach-pic32/Kconfig > +++ b/arch/mips/mach-pic32/Kconfig > @@ -26,6 +26,13 @@ endchoice > choice > prompt "Board select" > > +config TARGET_PIC32MZDASK > + bool "Microchip PIC32MZ[DA] Starter Kit" > + depends on SOC_PIC32MZDA > + help > + This supports Microchip PIC32MZ[DA] Starter Kit. > + > endchoice > > +source "board/microchip/pic32mzda/Kconfig" > endmenu > diff --git a/board/microchip/pic32mzda/Kconfig b/board/microchip/pic32mzda/Kconfig > new file mode 100644 > index 0000000..8acb393 > --- /dev/null > +++ b/board/microchip/pic32mzda/Kconfig > @@ -0,0 +1,13 @@ > + > +if TARGET_PIC32MZDASK > + > +config SYS_BOARD > + default "pic32mzda" > + > +config SYS_VENDOR > + default "microchip" > + > +config SYS_CONFIG_NAME > + default "pic32mzdask" > + > +endif > diff --git a/board/microchip/pic32mzda/MAINTAINERS b/board/microchip/pic32mzda/MAINTAINERS > new file mode 100644 > index 0000000..c934f1a > --- /dev/null > +++ b/board/microchip/pic32mzda/MAINTAINERS > @@ -0,0 +1,6 @@ > +PIC32MZDASK BOARD > +M: Purna Chandra Mandal <purna.mandal@microchip.com> > +S: Maintained > +F: board/microchip/pic32mzda/ > +F: include/configs/pic32mzdask.h > +F: configs/pic32mzdask_defconfig > diff --git a/board/microchip/pic32mzda/Makefile b/board/microchip/pic32mzda/Makefile > new file mode 100644 > index 0000000..3629530 > --- /dev/null > +++ b/board/microchip/pic32mzda/Makefile > @@ -0,0 +1,7 @@ > +# > +# (C) Copyright 2015 > +# Purna Chandra Mandal, purna.mandal@microchip.com. > +# > +# SPDX-License-Identifier: GPL-2.0+ > +# > +obj-y := pic32mzda.o > diff --git a/board/microchip/pic32mzda/README b/board/microchip/pic32mzda/README > new file mode 100644 > index 0000000..91d16ab > --- /dev/null > +++ b/board/microchip/pic32mzda/README > @@ -0,0 +1,22 @@ > +/* > + * (c) 2015 Purna Chandra Mandal <purna.mandal@microchip.com> > + */ > + > +PIC32MZ[DA] Starter Kit > +---------------------------------------- > +PIC32MZ[DA] Starter Kit is based on PIC32MZ[DA] family of micro-controller. > +This family is powered by MIPS M14KEC 32bit general purpose core and has > +advanced microcontroller features and peripherals. > + > +This processor boots with proprietary stage1 bootloader running from internal > +boot-flash. Stage1 bootloader inturns locates and jumps to U-Boot programmed > +on internal program-flash. Finally U-Boot loads OS image (along with other > +required files for booting) from either uSD card, or ethernet, or from USB > +storage. > + > +To boot Linux following three files are mandatory - uEnv.txt (custom U-Boot > +environment file), uImage, *.dtb (platform device-tree-blob file). > + > +U-Boot jumps to Linux using UHI specification. > + > +Visit http://microchip.com for details. > diff --git a/board/microchip/pic32mzda/pic32mzda.c b/board/microchip/pic32mzda/pic32mzda.c > new file mode 100644 > index 0000000..afe2ab8 > --- /dev/null > +++ b/board/microchip/pic32mzda/pic32mzda.c > @@ -0,0 +1,31 @@ > +/* > + * Microchip PIC32MZ[DA] Starter Kit board > + * > + * Copyright (C) 2015, Microchip Technology Inc. > + * Purna Chandra Mandal <purna.mandal@microchip.com> > + * > + * SPDX-License-Identifier: GPL-2.0+ > + * > + */ > + > +#include <common.h> > +#include <dm.h> > +#include <clk.h> > +#include <mach/pic32.h> > + > +#ifdef CONFIG_DISPLAY_BOARDINFO > +int checkboard(void) > +{ > + ulong rate = 0; > + struct udevice *dev; > + > + printf("Core: %s\n", get_core_name()); > + > + if (!uclass_get_device(UCLASS_CLK, 0, &dev)) { > + rate = clk_get_rate(dev); > + printf("CPU Speed: %lu MHz\n", rate / 1000000); > + } > + > + return 0; > +} > +#endif > diff --git a/configs/pic32mzdask_defconfig b/configs/pic32mzdask_defconfig > new file mode 100644 > index 0000000..13760e6 > --- /dev/null > +++ b/configs/pic32mzdask_defconfig > @@ -0,0 +1,21 @@ > +CONFIG_MIPS=y > +CONFIG_MACH_PIC32=y > +CONFIG_SOC_PIC32MZDA=y > +CONFIG_TARGET_PIC32MZDASK=y > +CONFIG_SYS_LITTLE_ENDIAN=y > +CONFIG_HUSH_PARSER=y > +CONFIG_SYS_HUSH_PARSER=y > +CONFIG_SYS_PROMPT="dask # " > +CONFIG_CMD_TIME=y > +# CONFIG_CMD_IMLS is not set > +CONFIG_SUPPORT_OF_CONTROL=y > +CONFIG_OF_EMBED=y > +CONFIG_DEFAULT_DEVICE_TREE="pic32mzda_sk" > +CONFIG_DM=y > +CONFIG_CMD_DM=y > +CONFIG_DM_SERIAL=y > +CONFIG_PIC32_SERIAL=y > +CONFIG_CLK=y > +CONFIG_PINCTRL=y > +# CONFIG_PINCTRL_FULL is not set > +CONFIG_PIC32_PINCTRL=y this looks written by hand. Please create this file with Kconfig: make savedefconfig cp defconfig configs/pic32mzdask_defconfig > diff --git a/include/configs/pic32mzdask.h b/include/configs/pic32mzdask.h > new file mode 100644 > index 0000000..3624107 > --- /dev/null > +++ b/include/configs/pic32mzdask.h > @@ -0,0 +1,100 @@ > +/* > + * (c) 2015 Purna Chandra Mandal <purna.mandal@microchip.com> > + * > + * SPDX-License-Identifier: GPL-2.0+ > + * > + * Microchip PIC32MZ[DA] Starter Kit. > + */ > + > +#ifndef __PIC32MZDASK_CONFIG_H > +#define __PIC32MZDASK_CONFIG_H > + > +/* System Configuration */ > +#define CONFIG_SYS_TEXT_BASE 0x9d004000 /* .text */ > +#define CONFIG_DISPLAY_BOARDINFO > + > +/*-------------------------------------------- > + * CPU configuration > + */ > +/* CPU Timer rate */ > +#define CONFIG_SYS_MIPS_TIMER_FREQ 100000000 > + > +/* Cache Configuration */ > +#define CONFIG_SYS_MIPS_CACHE_MODE CONF_CM_CACHABLE_NONCOHERENT > +#undef CONFIG_SKIP_LOWLEVEL_INIT you do not need to add #undef lines to disable config options. All options are disabled by default. > + > +/*---------------------------------------------------------------------- > + * Memory Layout > + */ > +#define CONFIG_SYS_SRAM_BASE 0x80000000 > +#define CONFIG_SYS_SRAM_SIZE 0x00080000 /* 512K */ > + > +/* Initial RAM for temporary stack, global data */ > +#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 > +#define CONFIG_SYS_INIT_RAM_ADDR \ > + (CONFIG_SYS_SRAM_BASE + CONFIG_SYS_SRAM_SIZE - CONFIG_SYS_INIT_RAM_SIZE) > +#define CONFIG_SYS_GBL_DATA_OFFSET \ > + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) > +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET > +#define CONFIG_SYS_INIT_SP_ADDR \ > + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) you do not need to take care of GENERATED_GBL_DATA_SIZE. This is automatically done in start.S. You only need to set: #define CONFIG_SYS_INIT_RAM_SIZE 0x10000 #define CONFIG_SYS_INIT_RAM_ADDR \ (CONFIG_SYS_SRAM_BASE + CONFIG_SYS_SRAM_SIZE - CONFIG_SYS_INIT_RAM_SIZE) #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE - 1) > + > +/* SDRAM Configuration (for final code, data, stack, heap) */ > +#define CONFIG_SYS_SDRAM_BASE 0x88000000 > +#define CONFIG_SYS_MALLOC_LEN (256 << 10) > +#define CONFIG_SYS_BOOTPARAMS_LEN (4 << 10) > +#define CONFIG_STACKSIZE (4 << 10) /* regular stack */ > + > +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE > +#define CONFIG_SYS_MONITOR_LEN (192 << 10) > + > +#define CONFIG_SYS_LOAD_ADDR 0x88500000 /* default load address */ > +#define CONFIG_SYS_ENV_ADDR 0x88300000 > + > +/* Memory Test */ > +#define CONFIG_SYS_MEMTEST_START 0x88000000 > +#define CONFIG_SYS_MEMTEST_END 0x88080000 > + > +/*---------------------------------------------------------------------- > + * Commands > + */ > +#define CONFIG_SYS_LONGHELP /* undef to save memory */ > +#define CONFIG_CMD_CLK > +#define CONFIG_CMD_MEMTEST > +#define CONFIG_CMD_MEMINFO > + > +/*------------------------------------------------- > + * FLASH configuration > + */ > +#define CONFIG_SYS_NO_FLASH > + > +/*------------------------------------------------------------ > + * Console Configuration > + */ > +#define CONFIG_BAUDRATE 115200 > +#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} > +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ > +#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/ > +#define CONFIG_SYS_PBSIZE \ > + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) > +#define CONFIG_CMDLINE_EDITING 1 > + > +/* > + * Handover flattened device tree (dtb file) to Linux kernel > + */ > +#define CONFIG_OF_LIBFDT 1 > + > +/* ------------------------------------------------- > + * Environment > + */ > +#define CONFIG_ENV_IS_NOWHERE 1 > +#define CONFIG_ENV_SIZE 0x4000 > + > +/* --------------------------------------------------------------------- > + * Board boot configuration > + */ > +#define CONFIG_TIMESTAMP /* Print image info with timestamp */ > +#define CONFIG_BOOTDELAY 5 /* autoboot after X seconds */ > +#undef CONFIG_BOOTARGS > + > +#endif /* __PIC32MZDASK_CONFIG_H */ > -- > 1.8.3.1 > >
On 01/06/2016 02:06 AM, Daniel Schwierzeck wrote: > 2016-01-04 15:01 GMT+01:00 Purna Chandra Mandal <purna.mandal@microchip.com>: >> This adds support for Microchip PIC32MZ[DA] Starter Kit board >> based on a PIC32MZ[DA] family of microcontroller. >> >> Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> >> >> --- >> >> Changes in v2: >> - move CONFIG_SYS_TEXT_BASE (from board/<>/config.mk) to include/configs/<board>.h >> >> arch/mips/dts/Makefile | 2 +- >> arch/mips/dts/pic32mzda_sk.dts | 38 +++++++++++++ >> arch/mips/mach-pic32/Kconfig | 7 +++ >> board/microchip/pic32mzda/Kconfig | 13 +++++ >> board/microchip/pic32mzda/MAINTAINERS | 6 ++ >> board/microchip/pic32mzda/Makefile | 7 +++ >> board/microchip/pic32mzda/README | 22 ++++++++ >> board/microchip/pic32mzda/pic32mzda.c | 31 +++++++++++ >> configs/pic32mzdask_defconfig | 21 +++++++ >> include/configs/pic32mzdask.h | 100 ++++++++++++++++++++++++++++++++++ >> 10 files changed, 246 insertions(+), 1 deletion(-) >> create mode 100644 arch/mips/dts/pic32mzda_sk.dts >> create mode 100644 board/microchip/pic32mzda/Kconfig >> create mode 100644 board/microchip/pic32mzda/MAINTAINERS >> create mode 100644 board/microchip/pic32mzda/Makefile >> create mode 100644 board/microchip/pic32mzda/README >> create mode 100644 board/microchip/pic32mzda/pic32mzda.c >> create mode 100644 configs/pic32mzdask_defconfig >> create mode 100644 include/configs/pic32mzdask.h >> >> diff --git a/arch/mips/dts/Makefile b/arch/mips/dts/Makefile >> index 47b6eb5..b513918 100644 >> --- a/arch/mips/dts/Makefile >> +++ b/arch/mips/dts/Makefile >> @@ -2,7 +2,7 @@ >> # SPDX-License-Identifier: GPL-2.0+ >> # >> >> -dtb-y += >> +dtb-$(CONFIG_TARGET_PIC32MZDASK) += pic32mzda_sk.dtb >> >> targets += $(dtb-y) >> >> diff --git a/arch/mips/dts/pic32mzda_sk.dts b/arch/mips/dts/pic32mzda_sk.dts >> new file mode 100644 >> index 0000000..99e7f64 >> --- /dev/null >> +++ b/arch/mips/dts/pic32mzda_sk.dts >> @@ -0,0 +1,38 @@ >> +/* >> + * Copyright (C) 2015 Purna Chandra Mandal, purna.mandal@microchip.com >> + * >> + * SPDX-License-Identifier: GPL-2.0+ >> + */ >> + >> +/dts-v1/; >> + >> +#include "pic32mzda.dtsi" >> + >> +/ { >> + model = "Microchip PIC32MZDASK"; >> + compatible = "microchip,pic32mzdask", "microchip,pic32mzda"; >> + >> + aliases { >> + console = &uart2; >> + serial0 = &uart2; >> + }; >> + >> + chosen { >> + stdout-path = "serial0:115200n8"; >> + }; >> +}; >> + >> +&clock { >> + status = "okay"; >> + u-boot,dm-pre-reloc; >> +}; >> + >> +&pinctrl { >> + status = "okay"; >> + u-boot,dm-pre-reloc; >> +}; >> + >> +&uart2 { >> + status = "okay"; >> + u-boot,dm-pre-reloc; >> +}; >> diff --git a/arch/mips/mach-pic32/Kconfig b/arch/mips/mach-pic32/Kconfig >> index a394791..f357fc6 100644 >> --- a/arch/mips/mach-pic32/Kconfig >> +++ b/arch/mips/mach-pic32/Kconfig >> @@ -26,6 +26,13 @@ endchoice >> choice >> prompt "Board select" >> >> +config TARGET_PIC32MZDASK >> + bool "Microchip PIC32MZ[DA] Starter Kit" >> + depends on SOC_PIC32MZDA >> + help >> + This supports Microchip PIC32MZ[DA] Starter Kit. >> + >> endchoice >> >> +source "board/microchip/pic32mzda/Kconfig" >> endmenu >> diff --git a/board/microchip/pic32mzda/Kconfig b/board/microchip/pic32mzda/Kconfig >> new file mode 100644 >> index 0000000..8acb393 >> --- /dev/null >> +++ b/board/microchip/pic32mzda/Kconfig >> @@ -0,0 +1,13 @@ >> + >> +if TARGET_PIC32MZDASK >> + >> +config SYS_BOARD >> + default "pic32mzda" >> + >> +config SYS_VENDOR >> + default "microchip" >> + >> +config SYS_CONFIG_NAME >> + default "pic32mzdask" >> + >> +endif >> diff --git a/board/microchip/pic32mzda/MAINTAINERS b/board/microchip/pic32mzda/MAINTAINERS >> new file mode 100644 >> index 0000000..c934f1a >> --- /dev/null >> +++ b/board/microchip/pic32mzda/MAINTAINERS >> @@ -0,0 +1,6 @@ >> +PIC32MZDASK BOARD >> +M: Purna Chandra Mandal <purna.mandal@microchip.com> >> +S: Maintained >> +F: board/microchip/pic32mzda/ >> +F: include/configs/pic32mzdask.h >> +F: configs/pic32mzdask_defconfig >> diff --git a/board/microchip/pic32mzda/Makefile b/board/microchip/pic32mzda/Makefile >> new file mode 100644 >> index 0000000..3629530 >> --- /dev/null >> +++ b/board/microchip/pic32mzda/Makefile >> @@ -0,0 +1,7 @@ >> +# >> +# (C) Copyright 2015 >> +# Purna Chandra Mandal, purna.mandal@microchip.com. >> +# >> +# SPDX-License-Identifier: GPL-2.0+ >> +# >> +obj-y := pic32mzda.o >> diff --git a/board/microchip/pic32mzda/README b/board/microchip/pic32mzda/README >> new file mode 100644 >> index 0000000..91d16ab >> --- /dev/null >> +++ b/board/microchip/pic32mzda/README >> @@ -0,0 +1,22 @@ >> +/* >> + * (c) 2015 Purna Chandra Mandal <purna.mandal@microchip.com> >> + */ >> + >> +PIC32MZ[DA] Starter Kit >> +---------------------------------------- >> +PIC32MZ[DA] Starter Kit is based on PIC32MZ[DA] family of micro-controller. >> +This family is powered by MIPS M14KEC 32bit general purpose core and has >> +advanced microcontroller features and peripherals. >> + >> +This processor boots with proprietary stage1 bootloader running from internal >> +boot-flash. Stage1 bootloader inturns locates and jumps to U-Boot programmed >> +on internal program-flash. Finally U-Boot loads OS image (along with other >> +required files for booting) from either uSD card, or ethernet, or from USB >> +storage. >> + >> +To boot Linux following three files are mandatory - uEnv.txt (custom U-Boot >> +environment file), uImage, *.dtb (platform device-tree-blob file). >> + >> +U-Boot jumps to Linux using UHI specification. >> + >> +Visit http://microchip.com for details. >> diff --git a/board/microchip/pic32mzda/pic32mzda.c b/board/microchip/pic32mzda/pic32mzda.c >> new file mode 100644 >> index 0000000..afe2ab8 >> --- /dev/null >> +++ b/board/microchip/pic32mzda/pic32mzda.c >> @@ -0,0 +1,31 @@ >> +/* >> + * Microchip PIC32MZ[DA] Starter Kit board >> + * >> + * Copyright (C) 2015, Microchip Technology Inc. >> + * Purna Chandra Mandal <purna.mandal@microchip.com> >> + * >> + * SPDX-License-Identifier: GPL-2.0+ >> + * >> + */ >> + >> +#include <common.h> >> +#include <dm.h> >> +#include <clk.h> >> +#include <mach/pic32.h> >> + >> +#ifdef CONFIG_DISPLAY_BOARDINFO >> +int checkboard(void) >> +{ >> + ulong rate = 0; >> + struct udevice *dev; >> + >> + printf("Core: %s\n", get_core_name()); >> + >> + if (!uclass_get_device(UCLASS_CLK, 0, &dev)) { >> + rate = clk_get_rate(dev); >> + printf("CPU Speed: %lu MHz\n", rate / 1000000); >> + } >> + >> + return 0; >> +} >> +#endif >> diff --git a/configs/pic32mzdask_defconfig b/configs/pic32mzdask_defconfig >> new file mode 100644 >> index 0000000..13760e6 >> --- /dev/null >> +++ b/configs/pic32mzdask_defconfig >> @@ -0,0 +1,21 @@ >> +CONFIG_MIPS=y >> +CONFIG_MACH_PIC32=y >> +CONFIG_SOC_PIC32MZDA=y >> +CONFIG_TARGET_PIC32MZDASK=y >> +CONFIG_SYS_LITTLE_ENDIAN=y >> +CONFIG_HUSH_PARSER=y >> +CONFIG_SYS_HUSH_PARSER=y >> +CONFIG_SYS_PROMPT="dask # " >> +CONFIG_CMD_TIME=y >> +# CONFIG_CMD_IMLS is not set >> +CONFIG_SUPPORT_OF_CONTROL=y >> +CONFIG_OF_EMBED=y >> +CONFIG_DEFAULT_DEVICE_TREE="pic32mzda_sk" >> +CONFIG_DM=y >> +CONFIG_CMD_DM=y >> +CONFIG_DM_SERIAL=y >> +CONFIG_PIC32_SERIAL=y >> +CONFIG_CLK=y >> +CONFIG_PINCTRL=y >> +# CONFIG_PINCTRL_FULL is not set >> +CONFIG_PIC32_PINCTRL=y > this looks written by hand. Please create this file with Kconfig: > > make savedefconfig > cp defconfig configs/pic32mzdask_defconfig Yes it is edited. I'll directly use kconfig generated one. >> diff --git a/include/configs/pic32mzdask.h b/include/configs/pic32mzdask.h >> new file mode 100644 >> index 0000000..3624107 >> --- /dev/null >> +++ b/include/configs/pic32mzdask.h >> @@ -0,0 +1,100 @@ >> +/* >> + * (c) 2015 Purna Chandra Mandal <purna.mandal@microchip.com> >> + * >> + * SPDX-License-Identifier: GPL-2.0+ >> + * >> + * Microchip PIC32MZ[DA] Starter Kit. >> + */ >> + >> +#ifndef __PIC32MZDASK_CONFIG_H >> +#define __PIC32MZDASK_CONFIG_H >> + >> +/* System Configuration */ >> +#define CONFIG_SYS_TEXT_BASE 0x9d004000 /* .text */ >> +#define CONFIG_DISPLAY_BOARDINFO >> + >> +/*-------------------------------------------- >> + * CPU configuration >> + */ >> +/* CPU Timer rate */ >> +#define CONFIG_SYS_MIPS_TIMER_FREQ 100000000 >> + >> +/* Cache Configuration */ >> +#define CONFIG_SYS_MIPS_CACHE_MODE CONF_CM_CACHABLE_NONCOHERENT >> +#undef CONFIG_SKIP_LOWLEVEL_INIT > you do not need to add #undef lines to disable config options. All > options are disabled by default. ack. Will remove. >> + >> +/*---------------------------------------------------------------------- >> + * Memory Layout >> + */ >> +#define CONFIG_SYS_SRAM_BASE 0x80000000 >> +#define CONFIG_SYS_SRAM_SIZE 0x00080000 /* 512K */ >> + >> +/* Initial RAM for temporary stack, global data */ >> +#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 >> +#define CONFIG_SYS_INIT_RAM_ADDR \ >> + (CONFIG_SYS_SRAM_BASE + CONFIG_SYS_SRAM_SIZE - CONFIG_SYS_INIT_RAM_SIZE) >> +#define CONFIG_SYS_GBL_DATA_OFFSET \ >> + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) >> +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET >> +#define CONFIG_SYS_INIT_SP_ADDR \ >> + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) > you do not need to take care of GENERATED_GBL_DATA_SIZE. This is > automatically done in start.S. You only need to set: > > #define CONFIG_SYS_INIT_RAM_SIZE 0x10000 > #define CONFIG_SYS_INIT_RAM_ADDR \ > (CONFIG_SYS_SRAM_BASE + CONFIG_SYS_SRAM_SIZE - CONFIG_SYS_INIT_RAM_SIZE) > #define CONFIG_SYS_INIT_SP_ADDR \ > (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE - 1) Good catch. Will remove. >> + >> +/* SDRAM Configuration (for final code, data, stack, heap) */ >> +#define CONFIG_SYS_SDRAM_BASE 0x88000000 >> +#define CONFIG_SYS_MALLOC_LEN (256 << 10) >> +#define CONFIG_SYS_BOOTPARAMS_LEN (4 << 10) >> +#define CONFIG_STACKSIZE (4 << 10) /* regular stack */ >> + >> +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE >> +#define CONFIG_SYS_MONITOR_LEN (192 << 10) >> + >> +#define CONFIG_SYS_LOAD_ADDR 0x88500000 /* default load address */ >> +#define CONFIG_SYS_ENV_ADDR 0x88300000 >> + >> +/* Memory Test */ >> +#define CONFIG_SYS_MEMTEST_START 0x88000000 >> +#define CONFIG_SYS_MEMTEST_END 0x88080000 >> + >> +/*---------------------------------------------------------------------- >> + * Commands >> + */ >> +#define CONFIG_SYS_LONGHELP /* undef to save memory */ >> +#define CONFIG_CMD_CLK >> +#define CONFIG_CMD_MEMTEST >> +#define CONFIG_CMD_MEMINFO >> + >> +/*------------------------------------------------- >> + * FLASH configuration >> + */ >> +#define CONFIG_SYS_NO_FLASH >> + >> +/*------------------------------------------------------------ >> + * Console Configuration >> + */ >> +#define CONFIG_BAUDRATE 115200 >> +#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} >> +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ >> +#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/ >> +#define CONFIG_SYS_PBSIZE \ >> + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) >> +#define CONFIG_CMDLINE_EDITING 1 >> + >> +/* >> + * Handover flattened device tree (dtb file) to Linux kernel >> + */ >> +#define CONFIG_OF_LIBFDT 1 >> + >> +/* ------------------------------------------------- >> + * Environment >> + */ >> +#define CONFIG_ENV_IS_NOWHERE 1 >> +#define CONFIG_ENV_SIZE 0x4000 >> + >> +/* --------------------------------------------------------------------- >> + * Board boot configuration >> + */ >> +#define CONFIG_TIMESTAMP /* Print image info with timestamp */ >> +#define CONFIG_BOOTDELAY 5 /* autoboot after X seconds */ >> +#undef CONFIG_BOOTARGS >> + >> +#endif /* __PIC32MZDASK_CONFIG_H */ >> -- >> 1.8.3.1 >> >> > >
diff --git a/arch/mips/dts/Makefile b/arch/mips/dts/Makefile index 47b6eb5..b513918 100644 --- a/arch/mips/dts/Makefile +++ b/arch/mips/dts/Makefile @@ -2,7 +2,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -dtb-y += +dtb-$(CONFIG_TARGET_PIC32MZDASK) += pic32mzda_sk.dtb targets += $(dtb-y) diff --git a/arch/mips/dts/pic32mzda_sk.dts b/arch/mips/dts/pic32mzda_sk.dts new file mode 100644 index 0000000..99e7f64 --- /dev/null +++ b/arch/mips/dts/pic32mzda_sk.dts @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2015 Purna Chandra Mandal, purna.mandal@microchip.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; + +#include "pic32mzda.dtsi" + +/ { + model = "Microchip PIC32MZDASK"; + compatible = "microchip,pic32mzdask", "microchip,pic32mzda"; + + aliases { + console = &uart2; + serial0 = &uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&clock { + status = "okay"; + u-boot,dm-pre-reloc; +}; + +&pinctrl { + status = "okay"; + u-boot,dm-pre-reloc; +}; + +&uart2 { + status = "okay"; + u-boot,dm-pre-reloc; +}; diff --git a/arch/mips/mach-pic32/Kconfig b/arch/mips/mach-pic32/Kconfig index a394791..f357fc6 100644 --- a/arch/mips/mach-pic32/Kconfig +++ b/arch/mips/mach-pic32/Kconfig @@ -26,6 +26,13 @@ endchoice choice prompt "Board select" +config TARGET_PIC32MZDASK + bool "Microchip PIC32MZ[DA] Starter Kit" + depends on SOC_PIC32MZDA + help + This supports Microchip PIC32MZ[DA] Starter Kit. + endchoice +source "board/microchip/pic32mzda/Kconfig" endmenu diff --git a/board/microchip/pic32mzda/Kconfig b/board/microchip/pic32mzda/Kconfig new file mode 100644 index 0000000..8acb393 --- /dev/null +++ b/board/microchip/pic32mzda/Kconfig @@ -0,0 +1,13 @@ + +if TARGET_PIC32MZDASK + +config SYS_BOARD + default "pic32mzda" + +config SYS_VENDOR + default "microchip" + +config SYS_CONFIG_NAME + default "pic32mzdask" + +endif diff --git a/board/microchip/pic32mzda/MAINTAINERS b/board/microchip/pic32mzda/MAINTAINERS new file mode 100644 index 0000000..c934f1a --- /dev/null +++ b/board/microchip/pic32mzda/MAINTAINERS @@ -0,0 +1,6 @@ +PIC32MZDASK BOARD +M: Purna Chandra Mandal <purna.mandal@microchip.com> +S: Maintained +F: board/microchip/pic32mzda/ +F: include/configs/pic32mzdask.h +F: configs/pic32mzdask_defconfig diff --git a/board/microchip/pic32mzda/Makefile b/board/microchip/pic32mzda/Makefile new file mode 100644 index 0000000..3629530 --- /dev/null +++ b/board/microchip/pic32mzda/Makefile @@ -0,0 +1,7 @@ +# +# (C) Copyright 2015 +# Purna Chandra Mandal, purna.mandal@microchip.com. +# +# SPDX-License-Identifier: GPL-2.0+ +# +obj-y := pic32mzda.o diff --git a/board/microchip/pic32mzda/README b/board/microchip/pic32mzda/README new file mode 100644 index 0000000..91d16ab --- /dev/null +++ b/board/microchip/pic32mzda/README @@ -0,0 +1,22 @@ +/* + * (c) 2015 Purna Chandra Mandal <purna.mandal@microchip.com> + */ + +PIC32MZ[DA] Starter Kit +---------------------------------------- +PIC32MZ[DA] Starter Kit is based on PIC32MZ[DA] family of micro-controller. +This family is powered by MIPS M14KEC 32bit general purpose core and has +advanced microcontroller features and peripherals. + +This processor boots with proprietary stage1 bootloader running from internal +boot-flash. Stage1 bootloader inturns locates and jumps to U-Boot programmed +on internal program-flash. Finally U-Boot loads OS image (along with other +required files for booting) from either uSD card, or ethernet, or from USB +storage. + +To boot Linux following three files are mandatory - uEnv.txt (custom U-Boot +environment file), uImage, *.dtb (platform device-tree-blob file). + +U-Boot jumps to Linux using UHI specification. + +Visit http://microchip.com for details. diff --git a/board/microchip/pic32mzda/pic32mzda.c b/board/microchip/pic32mzda/pic32mzda.c new file mode 100644 index 0000000..afe2ab8 --- /dev/null +++ b/board/microchip/pic32mzda/pic32mzda.c @@ -0,0 +1,31 @@ +/* + * Microchip PIC32MZ[DA] Starter Kit board + * + * Copyright (C) 2015, Microchip Technology Inc. + * Purna Chandra Mandal <purna.mandal@microchip.com> + * + * SPDX-License-Identifier: GPL-2.0+ + * + */ + +#include <common.h> +#include <dm.h> +#include <clk.h> +#include <mach/pic32.h> + +#ifdef CONFIG_DISPLAY_BOARDINFO +int checkboard(void) +{ + ulong rate = 0; + struct udevice *dev; + + printf("Core: %s\n", get_core_name()); + + if (!uclass_get_device(UCLASS_CLK, 0, &dev)) { + rate = clk_get_rate(dev); + printf("CPU Speed: %lu MHz\n", rate / 1000000); + } + + return 0; +} +#endif diff --git a/configs/pic32mzdask_defconfig b/configs/pic32mzdask_defconfig new file mode 100644 index 0000000..13760e6 --- /dev/null +++ b/configs/pic32mzdask_defconfig @@ -0,0 +1,21 @@ +CONFIG_MIPS=y +CONFIG_MACH_PIC32=y +CONFIG_SOC_PIC32MZDA=y +CONFIG_TARGET_PIC32MZDASK=y +CONFIG_SYS_LITTLE_ENDIAN=y +CONFIG_HUSH_PARSER=y +CONFIG_SYS_HUSH_PARSER=y +CONFIG_SYS_PROMPT="dask # " +CONFIG_CMD_TIME=y +# CONFIG_CMD_IMLS is not set +CONFIG_SUPPORT_OF_CONTROL=y +CONFIG_OF_EMBED=y +CONFIG_DEFAULT_DEVICE_TREE="pic32mzda_sk" +CONFIG_DM=y +CONFIG_CMD_DM=y +CONFIG_DM_SERIAL=y +CONFIG_PIC32_SERIAL=y +CONFIG_CLK=y +CONFIG_PINCTRL=y +# CONFIG_PINCTRL_FULL is not set +CONFIG_PIC32_PINCTRL=y diff --git a/include/configs/pic32mzdask.h b/include/configs/pic32mzdask.h new file mode 100644 index 0000000..3624107 --- /dev/null +++ b/include/configs/pic32mzdask.h @@ -0,0 +1,100 @@ +/* + * (c) 2015 Purna Chandra Mandal <purna.mandal@microchip.com> + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Microchip PIC32MZ[DA] Starter Kit. + */ + +#ifndef __PIC32MZDASK_CONFIG_H +#define __PIC32MZDASK_CONFIG_H + +/* System Configuration */ +#define CONFIG_SYS_TEXT_BASE 0x9d004000 /* .text */ +#define CONFIG_DISPLAY_BOARDINFO + +/*-------------------------------------------- + * CPU configuration + */ +/* CPU Timer rate */ +#define CONFIG_SYS_MIPS_TIMER_FREQ 100000000 + +/* Cache Configuration */ +#define CONFIG_SYS_MIPS_CACHE_MODE CONF_CM_CACHABLE_NONCOHERENT +#undef CONFIG_SKIP_LOWLEVEL_INIT + +/*---------------------------------------------------------------------- + * Memory Layout + */ +#define CONFIG_SYS_SRAM_BASE 0x80000000 +#define CONFIG_SYS_SRAM_SIZE 0x00080000 /* 512K */ + +/* Initial RAM for temporary stack, global data */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 +#define CONFIG_SYS_INIT_RAM_ADDR \ + (CONFIG_SYS_SRAM_BASE + CONFIG_SYS_SRAM_SIZE - CONFIG_SYS_INIT_RAM_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* SDRAM Configuration (for final code, data, stack, heap) */ +#define CONFIG_SYS_SDRAM_BASE 0x88000000 +#define CONFIG_SYS_MALLOC_LEN (256 << 10) +#define CONFIG_SYS_BOOTPARAMS_LEN (4 << 10) +#define CONFIG_STACKSIZE (4 << 10) /* regular stack */ + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_MONITOR_LEN (192 << 10) + +#define CONFIG_SYS_LOAD_ADDR 0x88500000 /* default load address */ +#define CONFIG_SYS_ENV_ADDR 0x88300000 + +/* Memory Test */ +#define CONFIG_SYS_MEMTEST_START 0x88000000 +#define CONFIG_SYS_MEMTEST_END 0x88080000 + +/*---------------------------------------------------------------------- + * Commands + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_CMD_CLK +#define CONFIG_CMD_MEMTEST +#define CONFIG_CMD_MEMINFO + +/*------------------------------------------------- + * FLASH configuration + */ +#define CONFIG_SYS_NO_FLASH + +/*------------------------------------------------------------ + * Console Configuration + */ +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/ +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_CMDLINE_EDITING 1 + +/* + * Handover flattened device tree (dtb file) to Linux kernel + */ +#define CONFIG_OF_LIBFDT 1 + +/* ------------------------------------------------- + * Environment + */ +#define CONFIG_ENV_IS_NOWHERE 1 +#define CONFIG_ENV_SIZE 0x4000 + +/* --------------------------------------------------------------------- + * Board boot configuration + */ +#define CONFIG_TIMESTAMP /* Print image info with timestamp */ +#define CONFIG_BOOTDELAY 5 /* autoboot after X seconds */ +#undef CONFIG_BOOTARGS + +#endif /* __PIC32MZDASK_CONFIG_H */
This adds support for Microchip PIC32MZ[DA] Starter Kit board based on a PIC32MZ[DA] family of microcontroller. Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> --- Changes in v2: - move CONFIG_SYS_TEXT_BASE (from board/<>/config.mk) to include/configs/<board>.h arch/mips/dts/Makefile | 2 +- arch/mips/dts/pic32mzda_sk.dts | 38 +++++++++++++ arch/mips/mach-pic32/Kconfig | 7 +++ board/microchip/pic32mzda/Kconfig | 13 +++++ board/microchip/pic32mzda/MAINTAINERS | 6 ++ board/microchip/pic32mzda/Makefile | 7 +++ board/microchip/pic32mzda/README | 22 ++++++++ board/microchip/pic32mzda/pic32mzda.c | 31 +++++++++++ configs/pic32mzdask_defconfig | 21 +++++++ include/configs/pic32mzdask.h | 100 ++++++++++++++++++++++++++++++++++ 10 files changed, 246 insertions(+), 1 deletion(-) create mode 100644 arch/mips/dts/pic32mzda_sk.dts create mode 100644 board/microchip/pic32mzda/Kconfig create mode 100644 board/microchip/pic32mzda/MAINTAINERS create mode 100644 board/microchip/pic32mzda/Makefile create mode 100644 board/microchip/pic32mzda/README create mode 100644 board/microchip/pic32mzda/pic32mzda.c create mode 100644 configs/pic32mzdask_defconfig create mode 100644 include/configs/pic32mzdask.h