Message ID | 1430149000-25747-1-git-send-email-jagannadh.teki@gmail.com |
---|---|
State | Accepted |
Delegated to: | Jagannadha Sutradharudu Teki |
Headers | show |
On 27 April 2015 at 21:06, Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> wrote: > Upto now flash sector_size is assigned from params which isn't > necessarily a sector size from vendor, so based on the SECT_* > flags from flash_params the erase_size will compute and it will > become the sector_size finally. > > Bug report (from Bin Meng): > => sf probe > SF: Detected SST25VF016B with page size 256 Bytes, erase size 4 KiB, > total 2 MiB, mapped at ffe00000 > > => sf erase 0 +100 > SF: 65536 bytes @ 0x0 Erased: OK > > Signed-off-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> > Reported-by: Bin Meng <bmeng.cn@gmail.com> > Tested-by: Bin Meng <bmeng.cn@gmail.com> > --- > Changes for v3: > - Updated comments > Changes for v2: > - Minimize the code logic > > drivers/mtd/spi/sf_internal.h | 3 ++- > drivers/mtd/spi/sf_probe.c | 3 +++ > 2 files changed, 5 insertions(+), 1 deletion(-) > > diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h > index bd834dc..4158e13 100644 > --- a/drivers/mtd/spi/sf_internal.h > +++ b/drivers/mtd/spi/sf_internal.h > @@ -119,7 +119,8 @@ int sst_write_bp(struct spi_flash *flash, u32 offset, size_t len, > * @name: Device name ([MANUFLETTER][DEVTYPE][DENSITY][EXTRAINFO]) > * @jedec: Device jedec ID (0x[1byte_manuf_id][2byte_dev_id]) > * @ext_jedec: Device ext_jedec ID > - * @sector_size: Sector size of this device > + * @sector_size: Isn't necessarily a sector size from vendor, > + * the size listed here is what works with CMD_ERASE_64K > * @nr_sectors: No.of sectors on this device > * @e_rd_cmd: Enum list for read commands > * @flags: Important param, for flash specific behaviour > diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c > index de8d0b7..3f6b882 100644 > --- a/drivers/mtd/spi/sf_probe.c > +++ b/drivers/mtd/spi/sf_probe.c > @@ -184,6 +184,9 @@ static int spi_flash_validate_params(struct spi_slave *spi, u8 *idcode, > flash->erase_size = flash->sector_size; > } > > + /* Now erase size becomes valid sector size */ > + flash->sector_size = flash->erase_size; > + > /* Look for the fastest read cmd */ > cmd = fls(params->e_rd_cmd & flash->spi->op_mode_rx); > if (cmd) { > -- > 1.9.1 > Applied to u-boot-spi/master thanks!
diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h index bd834dc..4158e13 100644 --- a/drivers/mtd/spi/sf_internal.h +++ b/drivers/mtd/spi/sf_internal.h @@ -119,7 +119,8 @@ int sst_write_bp(struct spi_flash *flash, u32 offset, size_t len, * @name: Device name ([MANUFLETTER][DEVTYPE][DENSITY][EXTRAINFO]) * @jedec: Device jedec ID (0x[1byte_manuf_id][2byte_dev_id]) * @ext_jedec: Device ext_jedec ID - * @sector_size: Sector size of this device + * @sector_size: Isn't necessarily a sector size from vendor, + * the size listed here is what works with CMD_ERASE_64K * @nr_sectors: No.of sectors on this device * @e_rd_cmd: Enum list for read commands * @flags: Important param, for flash specific behaviour diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c index de8d0b7..3f6b882 100644 --- a/drivers/mtd/spi/sf_probe.c +++ b/drivers/mtd/spi/sf_probe.c @@ -184,6 +184,9 @@ static int spi_flash_validate_params(struct spi_slave *spi, u8 *idcode, flash->erase_size = flash->sector_size; } + /* Now erase size becomes valid sector size */ + flash->sector_size = flash->erase_size; + /* Look for the fastest read cmd */ cmd = fls(params->e_rd_cmd & flash->spi->op_mode_rx); if (cmd) {