@@ -201,6 +201,10 @@ enum sunxi_gpio_number {
#define SUNXI_GPIO_PULL_UP 1
#define SUNXI_GPIO_PULL_DOWN 2
+/* Virtual AXP0 GPIOs */
+#define SUNXI_GPIO_AXP0_VBUS_DETECT 8
+#define SUNXI_GPIO_AXP0_VBUS_ENABLE 9
+
void sunxi_gpio_set_cfgbank(struct sunxi_gpio *pio, int bank_offset, u32 val);
void sunxi_gpio_set_cfgpin(u32 pin, u32 val);
int sunxi_gpio_get_cfgbank(struct sunxi_gpio *pio, int bank_offset);
@@ -125,6 +125,12 @@ int sunxi_name_to_gpio(const char *name)
#ifdef AXP_GPIO
if (strncasecmp(name, "AXP0-", 5) == 0) {
name += 5;
+ if (strcmp(name, "VBUS-DETECT") == 0)
+ return SUNXI_GPIO_AXP0_START +
+ SUNXI_GPIO_AXP0_VBUS_DETECT;
+ if (strcmp(name, "VBUS-ENABLE") == 0)
+ return SUNXI_GPIO_AXP0_START +
+ SUNXI_GPIO_AXP0_VBUS_ENABLE;
pin = simple_strtol(name, &eptr, 10);
if (!*name || *eptr)
return -1;
@@ -14,6 +14,7 @@
#include <errno.h>
#include <asm/arch/p2wi.h>
#include <asm/arch/rsb.h>
+#include <asm/arch/gpio.h>
#include <axp221.h>
/*
@@ -385,54 +386,66 @@ int axp221_get_sid(unsigned int *sid)
return 0;
}
-int axp_get_vbus(void)
+int axp_gpio_direction_input(unsigned int pin)
{
- int ret;
- u8 val;
-
- ret = axp221_init();
- if (ret)
- return ret;
-
- ret = pmic_bus_read(AXP221_POWER_STATUS, &val);
- if (ret)
- return ret;
-
- return (val & AXP221_POWER_STATUS_VBUS_USABLE) ? 1 : 0;
+ switch (pin) {
+ case SUNXI_GPIO_AXP0_VBUS_DETECT:
+ return 0;
+ default:
+ return -EINVAL;
+ }
}
-static int axp_drivebus_setup(void)
+int axp_gpio_direction_output(unsigned int pin, unsigned int val)
{
int ret;
- ret = axp221_init();
- if (ret)
- return ret;
+ switch (pin) {
+ case SUNXI_GPIO_AXP0_VBUS_ENABLE:
+ ret = axp221_clrbits(AXP221_MISC_CTRL,
+ AXP221_MISC_CTRL_N_VBUSEN_FUNC);
+ if (ret)
+ return ret;
- /* Set N_VBUSEN pin to output / DRIVEBUS function */
- return axp221_clrbits(AXP221_MISC_CTRL, AXP221_MISC_CTRL_N_VBUSEN_FUNC);
+ return axp_gpio_set_value(pin, val);
+ default:
+ return -EINVAL;
+ }
}
-int axp_drivebus_enable(void)
+int axp_gpio_get_value(unsigned int pin)
{
int ret;
+ u8 val;
- ret = axp_drivebus_setup();
- if (ret)
- return ret;
+ switch (pin) {
+ case SUNXI_GPIO_AXP0_VBUS_DETECT:
+ ret = pmic_bus_read(AXP221_POWER_STATUS, &val);
+ if (ret)
+ return ret;
- /* Set DRIVEBUS high */
- return axp221_setbits(AXP221_VBUS_IPSOUT, AXP221_VBUS_IPSOUT_DRIVEBUS);
+ return !!(val & AXP221_POWER_STATUS_VBUS_USABLE);
+ default:
+ return -EINVAL;
+ }
}
-int axp_drivebus_disable(void)
+int axp_gpio_set_value(unsigned int pin, unsigned int val)
{
int ret;
- ret = axp_drivebus_setup();
- if (ret)
- return ret;
+ switch (pin) {
+ case SUNXI_GPIO_AXP0_VBUS_ENABLE:
+ if (val)
+ ret = axp221_setbits(AXP221_VBUS_IPSOUT,
+ AXP221_VBUS_IPSOUT_DRIVEBUS);
+ else
+ ret = axp221_clrbits(AXP221_VBUS_IPSOUT,
+ AXP221_VBUS_IPSOUT_DRIVEBUS);
- /* Set DRIVEBUS low */
- return axp221_clrbits(AXP221_VBUS_IPSOUT, AXP221_VBUS_IPSOUT_DRIVEBUS);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
}
@@ -62,11 +62,7 @@
/* Page 1 addresses */
#define AXP221_SID 0x20
-/* We support vbus detection */
-#define AXP_VBUS_DETECT
-
-/* We support drivebus control */
-#define AXP_DRIVEBUS
+#define AXP_GPIO
int axp221_set_dcdc1(unsigned int mvolt);
int axp221_set_dcdc2(unsigned int mvolt);
@@ -83,6 +79,8 @@ int axp221_set_aldo3(unsigned int mvolt);
int axp221_set_eldo(int eldo_num, unsigned int mvolt);
int axp221_init(void);
int axp221_get_sid(unsigned int *sid);
-int axp_get_vbus(void);
-int axp_drivebus_enable(void);
-int axp_drivebus_disable(void);
+
+int axp_gpio_direction_input(unsigned int pin);
+int axp_gpio_direction_output(unsigned int pin, unsigned int val);
+int axp_gpio_get_value(unsigned int pin);
+int axp_gpio_set_value(unsigned int pin, unsigned int val);