@@ -8,6 +8,8 @@
#include <common.h>
#include <malloc.h>
+#include <dm.h>
+#include <dm/platform_data/serial_sh.h>
#include <asm/processor.h>
#include <asm/mach-types.h>
#include <asm/io.h>
@@ -159,3 +161,15 @@ void reset_cpu(ulong addr)
val |= 0x02;
i2c_write(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1);
}
+
+static const struct sh_serial_platdata serial_platdata = {
+ .base = SCIF2_BASE,
+ .type = PORT_SCIF,
+ .clk = 14745600,
+ .clk_mode = EXT_CLK,
+};
+
+U_BOOT_DEVICE(alt_serials) = {
+ .name = "serial_sh",
+ .platdata = &serial_platdata,
+};
@@ -1,3 +1,4 @@
CONFIG_ARM=y
CONFIG_RMOBILE=y
CONFIG_TARGET_ALT=y
+CONFIG_DM_SERIAL=y
@@ -38,8 +38,6 @@
/* SCIF */
#define CONFIG_SCIF_CONSOLE
-#define CONFIG_CONS_SCIF2
-#define CONFIG_SCIF_USE_EXT_CLK
/* FLASH */
#define CONFIG_SPI
@@ -70,7 +68,6 @@
#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2) /* EXT / 2 */
#define CONFIG_PLL1_CLK_FREQ (CONFIG_SYS_CLK_FREQ * 156 / 2)
#define CONFIG_P_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 24)
-#define CONFIG_SH_SCIF_CLK_FREQ 14745600 /* External Clock */
#define CONFIG_SYS_TMU_CLK_DIV 4
This adds drivers model support of serial port to Alt board, and migrate serial port to drivers model. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> --- board/renesas/alt/alt.c | 14 ++++++++++++++ configs/alt_defconfig | 1 + include/configs/alt.h | 3 --- 3 files changed, 15 insertions(+), 3 deletions(-)