@@ -9,6 +9,8 @@
#include <common.h>
#include <malloc.h>
+#include <dm.h>
+#include <dm/platform_data/serial_sh.h>
#include <asm/processor.h>
#include <asm/mach-types.h>
#include <asm/io.h>
@@ -160,3 +162,15 @@ void reset_cpu(ulong addr)
val |= 0x02;
i2c_write(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1);
}
+
+static const struct sh_serial_platdata serial_platdata = {
+ .base = SCIF0_BASE,
+ .type = PORT_SCIF,
+ .clk = 14745600,
+ .clk_mode = EXT_CLK,
+};
+
+U_BOOT_DEVICE(koelsch_serials) = {
+ .name = "serial_sh",
+ .platdata = &serial_platdata,
+};
@@ -1,3 +1,4 @@
CONFIG_ARM=y
CONFIG_RMOBILE=y
CONFIG_TARGET_KOELSCH=y
+CONFIG_DM_SERIAL=y
@@ -39,8 +39,6 @@
/* SCIF */
#define CONFIG_SCIF_CONSOLE
-#define CONFIG_CONS_SCIF0
-#define CONFIG_SCIF_USE_EXT_CLK
/* FLASH */
#define CONFIG_SYS_NO_FLASH
@@ -68,7 +66,6 @@
#define RMOBILE_XTAL_CLK 20000000u
#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK
#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2)
-#define CONFIG_SH_SCIF_CLK_FREQ 14745600
#define CONFIG_SYS_TMU_CLK_DIV 4
/* i2c */
@@ -35,6 +35,8 @@
#define CONFIG_SYS_THUMB_BUILD
#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
+
/* Support File sytems */
#define CONFIG_FAT_WRITE
#define CONFIG_DOS_PARTITION
This adds drivers model support of serial port to Koelsch board, and migrate serial port to drivers model. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> --- board/renesas/koelsch/koelsch.c | 14 ++++++++++++++ configs/koelsch_defconfig | 1 + include/configs/koelsch.h | 3 --- include/configs/rcar-gen2-common.h | 2 ++ 4 files changed, 17 insertions(+), 3 deletions(-)