diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h
index 268f66e..38ddbf2 100644
--- a/include/configs/B4860QDS.h
+++ b/include/configs/B4860QDS.h
@@ -737,7 +737,6 @@ unsigned long get_board_ddr_clk(void);
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h
index 036f264..dc481a1 100644
--- a/include/configs/BSC9131RDB.h
+++ b/include/configs/BSC9131RDB.h
@@ -382,7 +382,6 @@ extern unsigned long get_sdram_size(void);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 #define CONFIG_USB_EHCI
diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h
index 75889b3..601a27f 100644
--- a/include/configs/BSC9132QDS.h
+++ b/include/configs/BSC9132QDS.h
@@ -625,7 +625,6 @@ combinations. this should be removed later
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/DU440.h b/include/configs/DU440.h
index 2d7fc59..71be122 100644
--- a/include/configs/DU440.h
+++ b/include/configs/DU440.h
@@ -406,7 +406,6 @@ int du440_phy_addr(int devnum);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 #define CONFIG_SOURCE		1
diff --git a/include/configs/EXBITGEN.h b/include/configs/EXBITGEN.h
index f366308..208b599 100644
--- a/include/configs/EXBITGEN.h
+++ b/include/configs/EXBITGEN.h
@@ -186,6 +186,5 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 #endif	/* __CONFIG_H */
diff --git a/include/configs/JSE.h b/include/configs/JSE.h
index 4284d6a..5738ea9 100644
--- a/include/configs/JSE.h
+++ b/include/configs/JSE.h
@@ -274,6 +274,5 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 #endif	/* __CONFIG_H */
diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h
index 71e90d7..39eb2ef 100644
--- a/include/configs/KAREF.h
+++ b/include/configs/KAREF.h
@@ -273,7 +273,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE  230400	     /* kgdb serial port baud	*/
-#define CONFIG_KGDB_SER_INDEX 2		     /* kgdb serial port	*/
 #endif
 
 /*-----------------------------------------------------------------------
diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h
index 32ec0bf..6715435 100644
--- a/include/configs/METROBOX.h
+++ b/include/configs/METROBOX.h
@@ -338,7 +338,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE  230400	     /* kgdb serial port baud	*/
-#define CONFIG_KGDB_SER_INDEX 2		     /* kgdb serial port	*/
 #endif
 
 /*-----------------------------------------------------------------------
diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h
index f248a56..6042a1e 100644
--- a/include/configs/MIP405.h
+++ b/include/configs/MIP405.h
@@ -396,7 +396,6 @@
  ************************************************************/
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /************************************************************
diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h
index 0f9f436..aedb529 100644
--- a/include/configs/MPC8315ERDB.h
+++ b/include/configs/MPC8315ERDB.h
@@ -634,7 +634,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h
index a1e5f3b..c4c771b 100644
--- a/include/configs/MPC8323ERDB.h
+++ b/include/configs/MPC8323ERDB.h
@@ -481,7 +481,6 @@
 
 #if (CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
index 71fc497..f5b6202 100644
--- a/include/configs/MPC832XEMDS.h
+++ b/include/configs/MPC832XEMDS.h
@@ -574,7 +574,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index 3f742a2..00333fc 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -736,7 +736,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index e2ae596..ffb9a15 100644
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -730,7 +730,6 @@ boards, we say we have two, but don't display a message if we find only one. */
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 
diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
index ed780f1..d4c82cd 100644
--- a/include/configs/MPC8360EMDS.h
+++ b/include/configs/MPC8360EMDS.h
@@ -683,7 +683,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h
index d31be19..01e7ac7 100644
--- a/include/configs/MPC8360ERDK.h
+++ b/include/configs/MPC8360ERDK.h
@@ -544,7 +544,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index 98ffb9c..f52e77a 100644
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -662,7 +662,6 @@ extern int board_pci_host_broken(void);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
index ca28c0e..938f7ab 100644
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@@ -678,7 +678,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index 8197f89..8b8a42b 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -740,7 +740,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index 6689368..877cd70 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -397,7 +397,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index e24c597..6972a76 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -410,7 +410,6 @@ extern unsigned long get_clock_freq(void);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index 2e76df6..30fcdf5 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -441,7 +441,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index 9ff048a..242c04a 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -535,7 +535,6 @@ extern unsigned long get_clock_freq(void);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index 7f0f927..570c3f1 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -408,7 +408,6 @@ extern unsigned long get_clock_freq(void);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index b7c4a60..247c2d1 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -438,7 +438,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index c9a1539..8965626 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -430,7 +430,6 @@ extern unsigned long get_clock_freq(void);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index 341f6a8..384043b 100644
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -566,7 +566,6 @@ extern unsigned long get_clock_freq(void);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index 9ad9402..09af2e6 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -682,7 +682,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h
index 97f5c87..16d4dd8 100644
--- a/include/configs/MPC8610HPCD.h
+++ b/include/configs/MPC8610HPCD.h
@@ -517,7 +517,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index 8ed5050..66fc0bd 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -670,7 +670,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #if defined(CONFIG_CMD_KGDB)
     #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-    #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index c1cfbd4..c856295 100644
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -732,7 +732,6 @@ extern unsigned long get_sdram_size(void);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
index 1470526..04d5b48 100644
--- a/include/configs/P1022DS.h
+++ b/include/configs/P1022DS.h
@@ -725,7 +725,6 @@
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/P1023RDS.h b/include/configs/P1023RDS.h
index 2aa1f59..11c74ff 100644
--- a/include/configs/P1023RDS.h
+++ b/include/configs/P1023RDS.h
@@ -469,7 +469,6 @@ extern unsigned long get_clock_freq(void);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h
index 282f5c1..f679fb0 100644
--- a/include/configs/P1_P2_RDB.h
+++ b/include/configs/P1_P2_RDB.h
@@ -606,7 +606,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/P2020COME.h b/include/configs/P2020COME.h
index 9cc219e..b1561e4 100644
--- a/include/configs/P2020COME.h
+++ b/include/configs/P2020COME.h
@@ -432,7 +432,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h
index 8a29eaa..60af296 100644
--- a/include/configs/P2020DS.h
+++ b/include/configs/P2020DS.h
@@ -670,7 +670,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index 0df6f1a..2ba0e37 100644
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -677,7 +677,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h
index 1180724..29888b4 100644
--- a/include/configs/PIP405.h
+++ b/include/configs/PIP405.h
@@ -353,7 +353,6 @@
  ************************************************************/
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /************************************************************
diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h
index 5ab9315..efe6960 100644
--- a/include/configs/PMC440.h
+++ b/include/configs/PMC440.h
@@ -492,7 +492,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /* pass open firmware flat tree */
diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h
index 7c6bec8..a372886 100644
--- a/include/configs/T1040QDS.h
+++ b/include/configs/T1040QDS.h
@@ -682,7 +682,6 @@ unsigned long get_board_ddr_clk(void);
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/T1040RDB.h b/include/configs/T1040RDB.h
index 620387f..be1f09e 100644
--- a/include/configs/T1040RDB.h
+++ b/include/configs/T1040RDB.h
@@ -609,7 +609,6 @@
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/T1042RDB_PI.h b/include/configs/T1042RDB_PI.h
index 4b023f9..f233b5a 100644
--- a/include/configs/T1042RDB_PI.h
+++ b/include/configs/T1042RDB_PI.h
@@ -613,7 +613,6 @@
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index fc25425..15cf2bd 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -495,7 +495,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h
index 79a6079..4b25073 100644
--- a/include/configs/VCMA9.h
+++ b/include/configs/VCMA9.h
@@ -138,8 +138,6 @@
 #if defined(CONFIG_CMD_KGDB)
 /* speed to run kgdb serial port */
 #define CONFIG_KGDB_BAUDRATE		115200
-/* what's this ? it's not used anywhere */
-#define CONFIG_KGDB_SER_INDEX		2	/* which serial port to use */
 #endif
 
 /* Miscellaneous configurable options */
diff --git a/include/configs/W7OLMC.h b/include/configs/W7OLMC.h
index 8fda1b1..00a24ab 100644
--- a/include/configs/W7OLMC.h
+++ b/include/configs/W7OLMC.h
@@ -301,7 +301,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use	*/
 #endif
 
 /*
diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h
index 6836fc7..8ed2fa2 100644
--- a/include/configs/W7OLMG.h
+++ b/include/configs/W7OLMG.h
@@ -304,7 +304,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use	*/
 #endif
 
 /*
diff --git a/include/configs/ac14xx.h b/include/configs/ac14xx.h
index 1205557..d6cef88 100644
--- a/include/configs/ac14xx.h
+++ b/include/configs/ac14xx.h
@@ -471,7 +471,6 @@
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE		230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX		2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/actux1.h b/include/configs/actux1.h
index 3315f54..9b8bd78 100644
--- a/include/configs/actux1.h
+++ b/include/configs/actux1.h
@@ -58,8 +58,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 # define CONFIG_KGDB_BAUDRATE		230400
-/* which serial port to use */
-# define CONFIG_KGDB_SER_INDEX		1
 #endif
 
 /* Miscellaneous configurable options */
diff --git a/include/configs/actux2.h b/include/configs/actux2.h
index fb391ec..f0cbff7 100644
--- a/include/configs/actux2.h
+++ b/include/configs/actux2.h
@@ -51,8 +51,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 # define CONFIG_KGDB_BAUDRATE		230400
-/* which serial port to use */
-# define CONFIG_KGDB_SER_INDEX		1
 #endif
 
 /* Miscellaneous configurable options */
diff --git a/include/configs/actux3.h b/include/configs/actux3.h
index 61d96f5..7639107 100644
--- a/include/configs/actux3.h
+++ b/include/configs/actux3.h
@@ -49,8 +49,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 # define CONFIG_KGDB_BAUDRATE		230400
-/* which serial port to use */
-# define CONFIG_KGDB_SER_INDEX		1
 #endif
 
 /* Miscellaneous configurable options */
diff --git a/include/configs/actux4.h b/include/configs/actux4.h
index 2387279..12bd98a 100644
--- a/include/configs/actux4.h
+++ b/include/configs/actux4.h
@@ -56,8 +56,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 # define CONFIG_KGDB_BAUDRATE		230400
-/* which serial port to use */
-# define CONFIG_KGDB_SER_INDEX		1
 #endif
 
 /* Miscellaneous configurable options */
diff --git a/include/configs/alpr.h b/include/configs/alpr.h
index 61fdeba..08bba36 100644
--- a/include/configs/alpr.h
+++ b/include/configs/alpr.h
@@ -349,7 +349,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /* pass open firmware flat tree */
diff --git a/include/configs/amcc-common.h b/include/configs/amcc-common.h
index c9e9a03..0f38c92 100644
--- a/include/configs/amcc-common.h
+++ b/include/configs/amcc-common.h
@@ -125,7 +125,6 @@
  */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port*/
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use	*/
 #endif
 
 /*
diff --git a/include/configs/aria.h b/include/configs/aria.h
index 32216cd..b8d955a 100644
--- a/include/configs/aria.h
+++ b/include/configs/aria.h
@@ -507,7 +507,6 @@
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE		230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX		2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/balloon3.h b/include/configs/balloon3.h
index 12df45b..8b2a6cf 100644
--- a/include/configs/balloon3.h
+++ b/include/configs/balloon3.h
@@ -61,7 +61,6 @@
  */
 #ifdef	CONFIG_CMD_KGDB
 #define	CONFIG_KGDB_BAUDRATE		230400	/* kgdb serial port speed */
-#define	CONFIG_KGDB_SER_INDEX		2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h
index 556b42a..d1d732f 100644
--- a/include/configs/coreboot.h
+++ b/include/configs/coreboot.h
@@ -204,7 +204,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE			115200
-#define CONFIG_KGDB_SER_INDEX			2
 #endif
 
 /*
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index 562caa5..5fc5dca 100644
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -672,7 +672,6 @@
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/csb272.h b/include/configs/csb272.h
index ca0bffa..8a848be 100644
--- a/include/configs/csb272.h
+++ b/include/configs/csb272.h
@@ -99,7 +99,6 @@
  */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/csb472.h b/include/configs/csb472.h
index 596095d..5c03417 100644
--- a/include/configs/csb472.h
+++ b/include/configs/csb472.h
@@ -98,7 +98,6 @@
  */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/dvlhost.h b/include/configs/dvlhost.h
index 87b3314..1af7f16 100644
--- a/include/configs/dvlhost.h
+++ b/include/configs/dvlhost.h
@@ -57,8 +57,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 # define CONFIG_KGDB_BAUDRATE		230400
-/* which serial port to use */
-# define CONFIG_KGDB_SER_INDEX		1
 #endif
 
 /* Miscellaneous configurable options */
diff --git a/include/configs/km/kmp204x-common.h b/include/configs/km/kmp204x-common.h
index 2d5320b..7c233ec 100644
--- a/include/configs/km/kmp204x-common.h
+++ b/include/configs/km/kmp204x-common.h
@@ -385,7 +385,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 #define __USB_PHY_TYPE	utmi
diff --git a/include/configs/korat.h b/include/configs/korat.h
index b09af19..811ff99 100644
--- a/include/configs/korat.h
+++ b/include/configs/korat.h
@@ -542,7 +542,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400 /* speed to run kgdb serial port	*/
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use	*/
 #endif
 
 /* Pass open firmware flat tree */
diff --git a/include/configs/lp8x4x.h b/include/configs/lp8x4x.h
index 68e1a97..379c786 100644
--- a/include/configs/lp8x4x.h
+++ b/include/configs/lp8x4x.h
@@ -93,7 +93,6 @@
  */
 #ifdef	CONFIG_CMD_KGDB
 #define	CONFIG_KGDB_BAUDRATE		230400	/* kgdb serial port speed */
-#define	CONFIG_KGDB_SER_INDEX		2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h
index b87df54..4ffe165 100644
--- a/include/configs/lubbock.h
+++ b/include/configs/lubbock.h
@@ -86,7 +86,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index c348329..e9c8d8f 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -660,7 +660,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	    /* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h
index 6501ea4..d415ecd 100644
--- a/include/configs/mecp5123.h
+++ b/include/configs/mecp5123.h
@@ -364,7 +364,6 @@
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h
index 4a8adf6..38337b4 100644
--- a/include/configs/mpc5121ads.h
+++ b/include/configs/mpc5121ads.h
@@ -520,7 +520,6 @@
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/mpq101.h b/include/configs/mpq101.h
index 6d0d392..f28edf4 100644
--- a/include/configs/mpq101.h
+++ b/include/configs/mpq101.h
@@ -345,7 +345,6 @@
 
 #ifdef CONFIG_CMD_KGDB
 # define CONFIG_KGDB_BAUDRATE  230400 /* speed to run kgdb serial port */
-# define CONFIG_KGDB_SER_INDEX 2      /* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h
index c15d546..12667c5 100644
--- a/include/configs/mx1ads.h
+++ b/include/configs/mx1ads.h
@@ -86,8 +86,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
-						/* what's this ? it's not used anywhere */
-#define CONFIG_KGDB_SER_INDEX	1		/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h
index c48790d..376dfdb 100644
--- a/include/configs/omap5912osk.h
+++ b/include/configs/omap5912osk.h
@@ -94,7 +94,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	1	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/omap730p2.h b/include/configs/omap730p2.h
index 947f27b..73d57e6 100644
--- a/include/configs/omap730p2.h
+++ b/include/configs/omap730p2.h
@@ -101,7 +101,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	   115200    /* Speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	   1	     /* Which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 91a6782..f786d82 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -928,7 +928,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h
index 3fde7ca..1fdd602 100644
--- a/include/configs/p3p440.h
+++ b/include/configs/p3p440.h
@@ -303,6 +303,5 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 #endif	/* __CONFIG_H */
diff --git a/include/configs/palmld.h b/include/configs/palmld.h
index 84bc9ed..ae4dd75 100644
--- a/include/configs/palmld.h
+++ b/include/configs/palmld.h
@@ -93,7 +93,6 @@
  */
 #ifdef	CONFIG_CMD_KGDB
 #define	CONFIG_KGDB_BAUDRATE		230400	/* kgdb serial port speed */
-#define	CONFIG_KGDB_SER_INDEX		2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/palmtc.h b/include/configs/palmtc.h
index 661101c..1f94f0c 100644
--- a/include/configs/palmtc.h
+++ b/include/configs/palmtc.h
@@ -95,7 +95,6 @@
  */
 #ifdef	CONFIG_CMD_KGDB
 #define	CONFIG_KGDB_BAUDRATE		230400	/* kgdb serial port speed */
-#define	CONFIG_KGDB_SER_INDEX		2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/palmtreo680.h b/include/configs/palmtreo680.h
index adf8519..3662663 100644
--- a/include/configs/palmtreo680.h
+++ b/include/configs/palmtreo680.h
@@ -94,7 +94,6 @@
  */
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE            230400  /* kgdb serial port speed */
-#define CONFIG_KGDB_SER_INDEX           2       /* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h
index 400cb3e..5a5fe7f 100644
--- a/include/configs/pcs440ep.h
+++ b/include/configs/pcs440ep.h
@@ -427,7 +427,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*-----------------------------------------------------------------------
diff --git a/include/configs/pdm360ng.h b/include/configs/pdm360ng.h
index 266d107..2a54e5c 100644
--- a/include/configs/pdm360ng.h
+++ b/include/configs/pdm360ng.h
@@ -441,7 +441,6 @@
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /* POST support */
diff --git a/include/configs/pxa-common.h b/include/configs/pxa-common.h
index 5856ee1..f0ecc34 100644
--- a/include/configs/pxa-common.h
+++ b/include/configs/pxa-common.h
@@ -16,7 +16,6 @@
  */
 #ifdef	CONFIG_CMD_KGDB
 #define	CONFIG_KGDB_BAUDRATE		230400
-#define	CONFIG_KGDB_SER_INDEX		2
 #endif
 
 /*
diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h
index 84ad006..af7c076 100644
--- a/include/configs/pxa255_idp.h
+++ b/include/configs/pxa255_idp.h
@@ -199,7 +199,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h
index 7b04e0c..20d6178 100644
--- a/include/configs/quad100hd.h
+++ b/include/configs/quad100hd.h
@@ -265,7 +265,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
 #endif
 
 /* ENVIRONMENT VARS */
diff --git a/include/configs/rsdproto.h b/include/configs/rsdproto.h
index f144f84..92318c3 100644
--- a/include/configs/rsdproto.h
+++ b/include/configs/rsdproto.h
@@ -121,7 +121,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h
index a258fe8..b7f83e0 100644
--- a/include/configs/sbc8349.h
+++ b/include/configs/sbc8349.h
@@ -643,7 +643,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h
index 6d97060..abf1f9b 100644
--- a/include/configs/sbc8548.h
+++ b/include/configs/sbc8548.h
@@ -575,7 +575,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h
index dba948a..78f8219 100644
--- a/include/configs/sbc8641d.h
+++ b/include/configs/sbc8641d.h
@@ -523,7 +523,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h
index a87444e..d4ae19f 100644
--- a/include/configs/smdk2410.h
+++ b/include/configs/smdk2410.h
@@ -101,8 +101,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port */
-/* what's this ? it's not used anywhere */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/socrates.h b/include/configs/socrates.h
index b6fbe23..747460a 100644
--- a/include/configs/socrates.h
+++ b/include/configs/socrates.h
@@ -363,7 +363,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port*/
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use	*/
 #endif
 
 
diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h
index 9b3f0cc..8232b85 100644
--- a/include/configs/stxgp3.h
+++ b/include/configs/stxgp3.h
@@ -341,7 +341,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*Note: change below for your network setting!!! */
diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h
index 805814f..2c229cb 100644
--- a/include/configs/stxssa.h
+++ b/include/configs/stxssa.h
@@ -376,7 +376,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*Note: change below for your network setting!!! */
diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h
index 3f54f14..703918e 100644
--- a/include/configs/t4qds.h
+++ b/include/configs/t4qds.h
@@ -303,7 +303,6 @@
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h
index 0615117..b7804d2 100644
--- a/include/configs/trizepsiv.h
+++ b/include/configs/trizepsiv.h
@@ -125,7 +125,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h
index 734d13f..7ecbafe 100644
--- a/include/configs/vme8349.h
+++ b/include/configs/vme8349.h
@@ -539,7 +539,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/vpac270.h b/include/configs/vpac270.h
index c3ac612..71a89b6 100644
--- a/include/configs/vpac270.h
+++ b/include/configs/vpac270.h
@@ -124,7 +124,6 @@
  */
 #ifdef	CONFIG_CMD_KGDB
 #define	CONFIG_KGDB_BAUDRATE		230400	/* kgdb serial port speed */
-#define	CONFIG_KGDB_SER_INDEX		2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h
index 431ed96..2999d1b 100644
--- a/include/configs/xaeniax.h
+++ b/include/configs/xaeniax.h
@@ -84,7 +84,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	115200			/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	1			/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/zeus.h b/include/configs/zeus.h
index 9d58738..d8aeb37 100644
--- a/include/configs/zeus.h
+++ b/include/configs/zeus.h
@@ -283,7 +283,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h
index 52a745e..f9ccca7 100644
--- a/include/configs/zipitz2.h
+++ b/include/configs/zipitz2.h
@@ -117,7 +117,6 @@ unsigned char zipitz2_spi_read(void);
  */
 #ifdef	CONFIG_CMD_KGDB
 #define	CONFIG_KGDB_BAUDRATE		230400		/* speed to run kgdb serial port */
-#define	CONFIG_KGDB_SER_INDEX		2		/* which serial port to use */
 #endif
 
 /*
