Message ID | 1382637641-1919-1-git-send-email-a.heider@gmail.com |
---|---|
State | Changes Requested |
Delegated to: | Anatolij Gustschin |
Headers | show |
On 10/24/2013 07:00 PM, Andre Heider wrote: > Depending on the firmware's video options [1] the active SDTV or > HDTV mode can yield a framebuffer with noncontiguous horizontal lines, > giving a messed up display, for both, u-boot and the loaded kernel. > > Fix this by setting lcd_line_length to the pitch value of the configured > framebuffer. This sounds like the right concept. > diff --git a/drivers/video/bcm2835.c b/drivers/video/bcm2835.c > void lcd_enable(void) > { > + if (bcm2835_pitch) Why make this conditional? Does the firmware sometimes not return the correct pitch and/or does lcd_enable() get called before lcd_ctrl_init() so the global hasn't been set up? Either of those seem like nasty bugs that should be fixed... > + lcd_line_length = bcm2835_pitch; Why set lcd_line_length at a different time than the mailbox message is executed? Can't lcd_line_length be set at the end of lcd_ctrl_init(), thus avoiding the global variable bcm2835_pitch? > }
diff --git a/drivers/video/bcm2835.c b/drivers/video/bcm2835.c index 58a6163..431b8a8 100644 --- a/drivers/video/bcm2835.c +++ b/drivers/video/bcm2835.c @@ -14,6 +14,8 @@ DECLARE_GLOBAL_DATA_PTR; /* Global variables that lcd.c expects to exist */ vidinfo_t panel_info; +static u32 bcm2835_pitch; + struct msg_query { struct bcm2835_mbox_hdr hdr; struct bcm2835_mbox_tag_physical_w_h physical_w_h; @@ -30,6 +32,7 @@ struct msg_setup { struct bcm2835_mbox_tag_virtual_offset virtual_offset; struct bcm2835_mbox_tag_overscan overscan; struct bcm2835_mbox_tag_allocate_buffer allocate_buffer; + struct bcm2835_mbox_tag_pitch pitch; u32 end_tag; }; @@ -80,6 +83,7 @@ void lcd_ctrl_init(void *lcdbase) msg_setup->overscan.body.req.right = 0; BCM2835_MBOX_INIT_TAG(&msg_setup->allocate_buffer, ALLOCATE_BUFFER); msg_setup->allocate_buffer.body.req.alignment = 0x100; + BCM2835_MBOX_INIT_TAG_NO_REQ(&msg_setup->pitch, GET_PITCH); ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg_setup->hdr); if (ret) { @@ -90,6 +94,7 @@ void lcd_ctrl_init(void *lcdbase) w = msg_setup->physical_w_h.body.resp.width; h = msg_setup->physical_w_h.body.resp.height; + bcm2835_pitch = msg_setup->pitch.body.resp.pitch; debug("bcm2835: Final resolution is %d x %d\n", w, h); @@ -102,4 +107,6 @@ void lcd_ctrl_init(void *lcdbase) void lcd_enable(void) { + if (bcm2835_pitch) + lcd_line_length = bcm2835_pitch; }
Depending on the firmware's video options [1] the active SDTV or HDTV mode can yield a framebuffer with noncontiguous horizontal lines, giving a messed up display, for both, u-boot and the loaded kernel. Fix this by setting lcd_line_length to the pitch value of the configured framebuffer. [1] http://elinux.org/RPiconfig#Video_mode_options Signed-off-by: Andre Heider <a.heider@gmail.com> --- drivers/video/bcm2835.c | 7 +++++++ 1 file changed, 7 insertions(+)