Message ID | 1366038520-7492-5-git-send-email-r.sricharan@ti.com |
---|---|
State | Changes Requested |
Delegated to: | Tom Rini |
Headers | show |
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 04/15/2013 11:08 AM, Sricharan R wrote: > The boot parameters are read from individual variables assigned > for each of them. This been corrected and now they are stored as a > part of the global data 'gd' structure. So read them from 'gd' > instead. > > Signed-off-by: Sricharan R <r.sricharan@ti.com> --- > arch/arm/cpu/armv7/lowlevel_init.S | 8 ++++- > arch/arm/cpu/armv7/omap-common/boot-common.c | 20 ++--------- > arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 46 > ++---------------------- > arch/arm/include/asm/arch-omap4/sys_proto.h | 11 ++---- > arch/arm/include/asm/arch-omap5/sys_proto.h | 12 ++----- > arch/arm/include/asm/omap_common.h | 3 ++ > common/spl/spl.c | 12 ++++--- > include/configs/am335x_evm.h | 1 + > include/configs/pcm051.h | 1 + > include/configs/ti814x_evm.h | 1 + > include/spl.h | 1 - 11 files > changed, 32 insertions(+), 84 deletions(-) I can live with adding CONFIG_OMAP to the am335/ti81* parts. [snip] > diff --git a/common/spl/spl.c b/common/spl/spl.c index > 6715e0d..4a7ce42 100644 --- a/common/spl/spl.c +++ > b/common/spl/spl.c @@ -125,17 +125,21 @@ void > spl_parse_image_header(const struct image_header *header) > > __weak void __noreturn jump_to_image_no_args(struct spl_image_info > *spl_image) { +#ifdef CONFIG_OMAP typedef void __noreturn > (*image_entry_noargs_t)(u32 *); +#else + typedef void __noreturn > (*image_entry_noargs_t)(void); +#endif image_entry_noargs_t > image_entry = (image_entry_noargs_t) spl_image->entry_point; > > debug("image entry point: 0x%X\n", spl_image->entry_point); /* > Pass the saved boot_params from rom code */ -#if > defined(CONFIG_VIRTIO) || defined(CONFIG_ZEBU) - image_entry = > (image_entry_noargs_t)0x80100000; +#ifdef CONFIG_OMAP + > image_entry((u32 *)&gd->arch.omap_boot_params); +#else + > image_entry(); #endif - u32 boot_params_ptr_addr = > (u32)&boot_params_ptr; - image_entry((u32 *)boot_params_ptr_addr); > } We must correct jump_to_image_no_args to really be, in the default case here just image_entry() and have omap-common override the weak function with one that passes along our params, and comment what's going on. - -- Tom -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQIcBAEBAgAGBQJRbB4/AAoJENk4IS6UOR1WeWgP/3YpBeHa7RCjfc1ZfHjHSX4T RlULN42HhNG/pka7S/bTo83whcVLDYz3WXYLWDYO6YVCnpaU1dfV2SuXeKjJIA9M rfB/q2pIc6Wnjcfzrazdh7LS1A/0iV3qe4AUBgkaVJdQX+q5WwJoHVjzp1WH7aOH /iXUR9pnhPnv8Uc+DJwtoT9fnDH5TkeMeSkVKe2mJEYPbSiKhmPHfKDvwbX7VfPl IAD6ifda7rApH4QTWFyFj+9MsfW/XkdILmg4JaGQU5Gp6DwVC2cmNS47br5d9WeV dsY+vA8Fezw+/HT5Jq7HBAmhy+gu7x7gpnYs5IzOSlWS+32W6HWoPzo/CHcnCaGt 1ltB44KevYu5FCrBA4KlJsoMx9JR1yJukOv3ezEFe2G9PBPyylLwTJ0tkVJb0b2H fJO2fPCWbOHzvIy5nIFFY0sE9YsnKu8PAxqPFYaJGeUWQL87kRo9E0ep72HUv/Ia rrOD6KWgp6cHi1qrFqbnVctWbDKBjBCyd3kc1nhGSmZTSTUkd/9Z6ie3i+wOyYsO yBtG9S6riJDcECcE8nOxXRfW973aqxkH7ybNn5ekbYdP8iHq+UgFx8rfhf73gaen c07fmIZJxz7i0KXNTsjHGycDMq7UqsihrdX47C9kcrcFqxEWAcZc8kXBlM1Kura2 EX40u9fhgitYG8EG4GGo =5qv1 -----END PGP SIGNATURE-----
On Monday 15 April 2013 09:05 PM, Tom Rini wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > On 04/15/2013 11:08 AM, Sricharan R wrote: >> The boot parameters are read from individual variables assigned >> for each of them. This been corrected and now they are stored as a >> part of the global data 'gd' structure. So read them from 'gd' >> instead. >> >> Signed-off-by: Sricharan R <r.sricharan@ti.com> --- >> arch/arm/cpu/armv7/lowlevel_init.S | 8 ++++- >> arch/arm/cpu/armv7/omap-common/boot-common.c | 20 ++--------- >> arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 46 >> ++---------------------- >> arch/arm/include/asm/arch-omap4/sys_proto.h | 11 ++---- >> arch/arm/include/asm/arch-omap5/sys_proto.h | 12 ++----- >> arch/arm/include/asm/omap_common.h | 3 ++ >> common/spl/spl.c | 12 ++++--- >> include/configs/am335x_evm.h | 1 + >> include/configs/pcm051.h | 1 + >> include/configs/ti814x_evm.h | 1 + >> include/spl.h | 1 - 11 files >> changed, 32 insertions(+), 84 deletions(-) > > I can live with adding CONFIG_OMAP to the am335/ti81* parts. Thanks. I was suspicious about this. BTW, does am335/ti81 devices get the bootparams from romcode in the same as OMAP ? Also are there any am335 boards with XIP where i can test this ? > > [snip] >> diff --git a/common/spl/spl.c b/common/spl/spl.c index >> 6715e0d..4a7ce42 100644 --- a/common/spl/spl.c +++ >> b/common/spl/spl.c @@ -125,17 +125,21 @@ void >> spl_parse_image_header(const struct image_header *header) >> >> __weak void __noreturn jump_to_image_no_args(struct spl_image_info >> *spl_image) { +#ifdef CONFIG_OMAP typedef void __noreturn >> (*image_entry_noargs_t)(u32 *); +#else + typedef void __noreturn >> (*image_entry_noargs_t)(void); +#endif image_entry_noargs_t >> image_entry = (image_entry_noargs_t) spl_image->entry_point; >> >> debug("image entry point: 0x%X\n", spl_image->entry_point); /* >> Pass the saved boot_params from rom code */ -#if >> defined(CONFIG_VIRTIO) || defined(CONFIG_ZEBU) - image_entry = >> (image_entry_noargs_t)0x80100000; +#ifdef CONFIG_OMAP + >> image_entry((u32 *)&gd->arch.omap_boot_params); +#else + >> image_entry(); #endif - u32 boot_params_ptr_addr = >> (u32)&boot_params_ptr; - image_entry((u32 *)boot_params_ptr_addr); >> } > > We must correct jump_to_image_no_args to really be, in the default > case here just image_entry() and have omap-common override the weak > function with one that passes along our params, and comment what's > going on. > ok, that looks cleaner. This change in V2. Regards, Sricharan
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 04/15/2013 11:39 AM, Sricharan R wrote: > On Monday 15 April 2013 09:05 PM, Tom Rini wrote: >> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 >> >> On 04/15/2013 11:08 AM, Sricharan R wrote: >>> The boot parameters are read from individual variables >>> assigned for each of them. This been corrected and now they are >>> stored as a part of the global data 'gd' structure. So read >>> them from 'gd' instead. >>> >>> Signed-off-by: Sricharan R <r.sricharan@ti.com> --- >>> arch/arm/cpu/armv7/lowlevel_init.S | 8 ++++- >>> arch/arm/cpu/armv7/omap-common/boot-common.c | 20 >>> ++--------- arch/arm/cpu/armv7/omap-common/lowlevel_init.S | >>> 46 ++---------------------- >>> arch/arm/include/asm/arch-omap4/sys_proto.h | 11 ++---- >>> arch/arm/include/asm/arch-omap5/sys_proto.h | 12 ++----- >>> arch/arm/include/asm/omap_common.h | 3 ++ >>> common/spl/spl.c | 12 ++++--- >>> include/configs/am335x_evm.h | 1 + >>> include/configs/pcm051.h | 1 + >>> include/configs/ti814x_evm.h | 1 + >>> include/spl.h | 1 - 11 >>> files changed, 32 insertions(+), 84 deletions(-) >> >> I can live with adding CONFIG_OMAP to the am335/ti81* parts. > Thanks. I was suspicious about this. > > BTW, does am335/ti81 devices get the bootparams from romcode in the > same as OMAP ? Yes, that's some common code we all share now. > Also are there any am335 boards with XIP where i can test this ? am335x can have NOR, and there is a NOR cape for beaglebone, but we don't have everything for that in mainline just yet. Once that gets closer I will check it out. - -- Tom -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQIcBAEBAgAGBQJRbCAxAAoJENk4IS6UOR1WYV8P/11BbdwmzsnP7kp1vfuBtPeW cU4A0unTnX6WiIOtEUsOW7i0Mk8QFDsm6KknkCvkOw51Vs+cYTiYeB0hjEmKH129 DEEGGWkhoaupmRtPmmNGzZaCDGbBsWOMexwzCS6L5ozsYWov+FIJtsLVMNR7EV83 8f1O5TA6EtTjmJ31AjvkFTOyTej0p+I167+edLsCzeMCQyuVj/aKWoH2HCHWhkhb fq/CYExXiW9uhxWKinvECuOk9Yjw9scQWfM21GQQL1GK9zMNv/hZ+SoLptX67twZ SiQboUdVAz/VhvHC/CvsNjW3lGOVrV1YwAFlhYHrjboA7aAm7H8zQRNbF55r95bc bjA6bBe8xIWqmeu6tWQRP9zej8V7NWKaGMhFHSqSIE9svCG/x7gUnFal2z3+0hCa xaxUiJgAAFGmEQNaw9HJ3sLogc18pOLABUSCVmtNlpRh7qTpK7a4qs2bx8gT+FIS H3GIQRya952wXFipjxnzdKzr4zPmTGtIwzR9PSYSiY0V5w5jsnZ2BBb0YAZNWy4E SmdwmYb27g3sVNTZzE5UIwv2NM/EY1IpJAca2vCR2n52ibJqraOTqPHMAdya4BX1 I5UD5HiCsX4jokfF+eBl3JllYgj/JoqSQCLS/zpFu+qll1tZHEMIYkhKNU4nDPjg Su8NIwR0hmJvuOEqtEsz =U9OR -----END PGP SIGNATURE-----
On Monday 15 April 2013 09:13 PM, Tom Rini wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > On 04/15/2013 11:39 AM, Sricharan R wrote: >> On Monday 15 April 2013 09:05 PM, Tom Rini wrote: >>> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 >>> >>> On 04/15/2013 11:08 AM, Sricharan R wrote: >>>> The boot parameters are read from individual variables >>>> assigned for each of them. This been corrected and now they are >>>> stored as a part of the global data 'gd' structure. So read >>>> them from 'gd' instead. >>>> >>>> Signed-off-by: Sricharan R <r.sricharan@ti.com> --- >>>> arch/arm/cpu/armv7/lowlevel_init.S | 8 ++++- >>>> arch/arm/cpu/armv7/omap-common/boot-common.c | 20 >>>> ++--------- arch/arm/cpu/armv7/omap-common/lowlevel_init.S | >>>> 46 ++---------------------- >>>> arch/arm/include/asm/arch-omap4/sys_proto.h | 11 ++---- >>>> arch/arm/include/asm/arch-omap5/sys_proto.h | 12 ++----- >>>> arch/arm/include/asm/omap_common.h | 3 ++ >>>> common/spl/spl.c | 12 ++++--- >>>> include/configs/am335x_evm.h | 1 + >>>> include/configs/pcm051.h | 1 + >>>> include/configs/ti814x_evm.h | 1 + >>>> include/spl.h | 1 - 11 >>>> files changed, 32 insertions(+), 84 deletions(-) >>> >>> I can live with adding CONFIG_OMAP to the am335/ti81* parts. >> Thanks. I was suspicious about this. >> >> BTW, does am335/ti81 devices get the bootparams from romcode in the >> same as OMAP ? > > Yes, that's some common code we all share now. > >> Also are there any am335 boards with XIP where i can test this ? > > am335x can have NOR, and there is a NOR cape for beaglebone, but we > don't have everything for that in mainline just yet. Once that gets > closer I will check it out. > Ok, thanks for that. Regards, Sricharan
diff --git a/arch/arm/cpu/armv7/lowlevel_init.S b/arch/arm/cpu/armv7/lowlevel_init.S index 0d45528..0a15aa4 100644 --- a/arch/arm/cpu/armv7/lowlevel_init.S +++ b/arch/arm/cpu/armv7/lowlevel_init.S @@ -37,7 +37,13 @@ ENTRY(lowlevel_init) */ ldr sp, =CONFIG_SYS_INIT_SP_ADDR bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - +#ifdef CONFIG_SPL_BUILD + ldr r8, =gdata +#else + sub sp, #GD_SIZE + bic sp, sp, #7 + mov r8, sp +#endif /* * Save the old lr(passed in ip) and the current lr to stack */ diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c index 24cbe2d..6561957 100644 --- a/arch/arm/cpu/armv7/omap-common/boot-common.c +++ b/arch/arm/cpu/armv7/omap-common/boot-common.c @@ -23,31 +23,17 @@ #include <asm/arch/mmc_host_def.h> #include <asm/arch/sys_proto.h> -/* - * This is used to verify if the configuration header - * was executed by rom code prior to control of transfer - * to the bootloader. SPL is responsible for saving and - * passing the boot_params pointer to the u-boot. - */ -struct omap_boot_parameters boot_params __attribute__ ((section(".data"))); +DECLARE_GLOBAL_DATA_PTR; #ifdef CONFIG_SPL_BUILD -/* - * We use static variables because global data is not ready yet. - * Initialized data is available in SPL right from the beginning. - * We would not typically need to save these parameters in regular - * U-Boot. This is needed only in SPL at the moment. - */ -u32 omap_bootmode = MMCSD_MODE_FAT; - u32 spl_boot_device(void) { - return (u32) (boot_params.omap_bootdevice); + return (u32) (gd->arch.omap_boot_params.omap_bootdevice); } u32 spl_boot_mode(void) { - return omap_bootmode; + return gd->arch.omap_boot_params.omap_bootmode; } void spl_board_init(void) diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S index b933fe8..c489536 100644 --- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S +++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S @@ -28,55 +28,13 @@ #include <config.h> #include <asm/arch/omap.h> +#include <asm/omap_common.h> #include <asm/arch/spl.h> #include <linux/linkage.h> ENTRY(save_boot_params) - /* - * See if the rom code passed pointer is valid: - * It is not valid if it is not in non-secure SRAM - * This may happen if you are booting with the help of - * debugger - */ - ldr r2, =NON_SECURE_SRAM_START - cmp r2, r0 - bgt 1f - ldr r2, =NON_SECURE_SRAM_END - cmp r2, r0 - blt 1f - - /* - * store the boot params passed from rom code or saved - * and passed by SPL - */ - cmp r0, #0 - beq 1f - ldr r1, =boot_params + ldr r1, =OMAP_SRAM_SCRATCH_BOOT_PARAMS str r0, [r1] -#ifdef CONFIG_SPL_BUILD - /* Store the boot device in spl_boot_device */ - ldrb r2, [r0, #BOOT_DEVICE_OFFSET] @ r1 <- value of boot device - and r2, #BOOT_DEVICE_MASK - ldr r3, =boot_params - strb r2, [r3, #BOOT_DEVICE_OFFSET] @ spl_boot_device <- r1 - - /* boot mode is passed only for devices that can raw/fat mode */ - cmp r2, #BOOT_DEVICE_XIP - blt 2f - cmp r2, #BOOT_DEVICE_MMC2 - bgt 2f - /* Store the boot mode (raw/FAT) in omap_bootmode */ - ldr r2, [r0, #DEV_DESC_PTR_OFFSET] @ get the device descriptor ptr - ldr r2, [r2, #DEV_DATA_PTR_OFFSET] @ get the pDeviceData ptr - ldr r2, [r2, #BOOT_MODE_OFFSET] @ get the boot mode - ldr r3, =omap_bootmode - str r2, [r3] -#endif -2: - ldrb r2, [r0, #CH_FLAGS_OFFSET] - ldr r3, =boot_params - strb r2, [r3, #CH_FLAGS_OFFSET] -1: bx lr ENDPROC(save_boot_params) diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h index d5f1868..841388a 100644 --- a/arch/arm/include/asm/arch-omap4/sys_proto.h +++ b/arch/arm/include/asm/arch-omap4/sys_proto.h @@ -27,6 +27,8 @@ #include <asm/omap_common.h> #include <asm/arch/mux_omap4.h> +DECLARE_GLOBAL_DATA_PTR; + struct omap_sysinfo { char *board_string; }; @@ -58,13 +60,6 @@ void omap_vc_init(u16 speed_khz); int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data); u32 warm_reset(void); void force_emif_self_refresh(void); -/* - * This is used to verify if the configuration header - * was executed by Romcode prior to control of transfer - * to the bootloader. SPL is responsible for saving and - * passing this to the u-boot. - */ -extern struct omap_boot_parameters boot_params; static inline u32 running_from_sdram(void) { @@ -84,7 +79,7 @@ static inline u8 uboot_loaded_by_spl(void) * variable by both SPL and u-boot.Check out for CHSETTINGS, which is a * mandatory section if CH is present. */ - if ((boot_params.ch_flags) & (CH_FLAGS_CHSETTINGS)) + if ((gd->arch.omap_boot_params.ch_flags) & (CH_FLAGS_CHSETTINGS)) return 0; else return running_from_sdram(); diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h index e66ab44..1099ec3 100644 --- a/arch/arm/include/asm/arch-omap5/sys_proto.h +++ b/arch/arm/include/asm/arch-omap5/sys_proto.h @@ -27,6 +27,8 @@ #include <asm/omap_common.h> #include <asm/arch/clocks.h> +DECLARE_GLOBAL_DATA_PTR; + struct pad_conf_entry { u32 offset; u32 val; @@ -65,14 +67,6 @@ void force_emif_self_refresh(void); void get_ioregs(const struct ctrl_ioregs **regs); void srcomp_enable(void); -/* - * This is used to verify if the configuration header - * was executed by Romcode prior to control of transfer - * to the bootloader. SPL is responsible for saving and - * passing this to the u-boot. - */ -extern struct omap_boot_parameters boot_params; - static inline u32 running_from_sdram(void) { u32 pc; @@ -91,7 +85,7 @@ static inline u8 uboot_loaded_by_spl(void) * variable by both SPL and u-boot.Check out for CHSETTINGS, which is a * mandatory section if CH is present. */ - if ((boot_params.ch_flags) & (CH_FLAGS_CHSETTINGS)) + if ((gd->arch.omap_boot_params.ch_flags) & (CH_FLAGS_CHSETTINGS)) return 0; else return running_from_sdram(); diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index 6b73d86..9db4b1b 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -25,6 +25,8 @@ #ifndef _OMAP_COMMON_H_ #define _OMAP_COMMON_H_ +#ifndef __ASSEMBLY__ + #include <common.h> #define NUM_SYS_CLKS 8 @@ -557,6 +559,7 @@ static inline u32 omap_revision(void) extern u32 *const omap_si_rev; return *omap_si_rev; } +#endif /* * silicon revisions. diff --git a/common/spl/spl.c b/common/spl/spl.c index 6715e0d..4a7ce42 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -125,17 +125,21 @@ void spl_parse_image_header(const struct image_header *header) __weak void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) { +#ifdef CONFIG_OMAP typedef void __noreturn (*image_entry_noargs_t)(u32 *); +#else + typedef void __noreturn (*image_entry_noargs_t)(void); +#endif image_entry_noargs_t image_entry = (image_entry_noargs_t) spl_image->entry_point; debug("image entry point: 0x%X\n", spl_image->entry_point); /* Pass the saved boot_params from rom code */ -#if defined(CONFIG_VIRTIO) || defined(CONFIG_ZEBU) - image_entry = (image_entry_noargs_t)0x80100000; +#ifdef CONFIG_OMAP + image_entry((u32 *)&gd->arch.omap_boot_params); +#else + image_entry(); #endif - u32 boot_params_ptr_addr = (u32)&boot_params_ptr; - image_entry((u32 *)boot_params_ptr_addr); } #ifdef CONFIG_SPL_RAM_DEVICE diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index b7c443c..976f4d1 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -17,6 +17,7 @@ #define __CONFIG_AM335X_EVM_H #define CONFIG_AM33XX +#define CONFIG_OMAP #include <asm/arch/omap.h> diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h index d0ea74e..5e5fab1 100644 --- a/include/configs/pcm051.h +++ b/include/configs/pcm051.h @@ -20,6 +20,7 @@ #define __CONFIG_PCM051_H #define CONFIG_AM33XX +#define CONFIG_OMAP #include <asm/arch/omap.h> diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h index 16547e3..68a7307 100644 --- a/include/configs/ti814x_evm.h +++ b/include/configs/ti814x_evm.h @@ -19,6 +19,7 @@ #define CONFIG_TI81XX #define CONFIG_TI814X #define CONFIG_SYS_NO_FLASH +#define CONFIG_OMAP #include <asm/arch/omap.h> diff --git a/include/spl.h b/include/spl.h index b40be80..4bc1dd1 100644 --- a/include/spl.h +++ b/include/spl.h @@ -44,7 +44,6 @@ struct spl_image_info { #define SPL_COPY_PAYLOAD_ONLY 1 extern struct spl_image_info spl_image; -extern u32 *boot_params_ptr; /* SPL common functions */ void preloader_console_init(void);
The boot parameters are read from individual variables assigned for each of them. This been corrected and now they are stored as a part of the global data 'gd' structure. So read them from 'gd' instead. Signed-off-by: Sricharan R <r.sricharan@ti.com> --- arch/arm/cpu/armv7/lowlevel_init.S | 8 ++++- arch/arm/cpu/armv7/omap-common/boot-common.c | 20 ++--------- arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 46 ++---------------------- arch/arm/include/asm/arch-omap4/sys_proto.h | 11 ++---- arch/arm/include/asm/arch-omap5/sys_proto.h | 12 ++----- arch/arm/include/asm/omap_common.h | 3 ++ common/spl/spl.c | 12 ++++--- include/configs/am335x_evm.h | 1 + include/configs/pcm051.h | 1 + include/configs/ti814x_evm.h | 1 + include/spl.h | 1 - 11 files changed, 32 insertions(+), 84 deletions(-)