diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
index c93794d..277dc66 100644
--- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c
+++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
@@ -244,10 +244,7 @@ int checkboard(void)
  */
 u32 get_device_type(void)
 {
-	struct omap_sys_ctrl_regs *ctrl =
-		      (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
-
-	return (readl(&ctrl->control_status) &
+	return (readl((*ctrl)->control_status) &
 				      (DEVICE_TYPE_MASK)) >> DEVICE_TYPE_SHIFT;
 }
 
diff --git a/arch/arm/cpu/armv7/omap4/hw_data.c b/arch/arm/cpu/armv7/omap4/hw_data.c
index 17c1453..de449e4 100644
--- a/arch/arm/cpu/armv7/omap4/hw_data.c
+++ b/arch/arm/cpu/armv7/omap4/hw_data.c
@@ -37,6 +37,8 @@ struct prcm_regs const **prcm =
 			(struct prcm_regs const **) OMAP_SRAM_SCRATCH_PRCM_PTR;
 struct dplls const **dplls_data =
 			(struct dplls const **) OMAP_SRAM_SCRATCH_DPLLS_PTR;
+struct omap_sys_ctrl_regs const **ctrl =
+	(struct omap_sys_ctrl_regs const **)OMAP4_SRAM_SCRATCH_SYS_CTRL;
 
 /*
  * The M & N values in the following tables are created using the
@@ -454,4 +456,6 @@ void hw_data_init(void)
 		printf("\n INVALID OMAP REVISION ");
 	}
 
+	*ctrl = &omap4_ctrl;
+	prcm_init(omap_vcores);
 }
diff --git a/arch/arm/cpu/armv7/omap4/hwinit.c b/arch/arm/cpu/armv7/omap4/hwinit.c
index f4123aa..2db517b 100644
--- a/arch/arm/cpu/armv7/omap4/hwinit.c
+++ b/arch/arm/cpu/armv7/omap4/hwinit.c
@@ -57,10 +57,6 @@ const struct gpio_bank *const omap_gpio_bank = gpio_bank_44xx;
 void do_io_settings(void)
 {
 	u32 lpddr2io;
-	struct control_lpddr2io_regs *lpddr2io_regs =
-		(struct control_lpddr2io_regs *)LPDDR2_IO_REGS_BASE;
-	struct omap_sys_ctrl_regs *const ctrl =
-		(struct omap_sys_ctrl_regs *)SYSCTRL_GENERAL_CORE_BASE;
 
 	u32 omap4_rev = omap_revision();
 
@@ -72,20 +68,20 @@ void do_io_settings(void)
 		lpddr2io = CONTROL_LPDDR2IO_SLEW_315PS_DRV12_PULL_DOWN;
 
 	/* EMIF1 */
-	writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_0);
-	writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_1);
+	writel(lpddr2io, (*ctrl)->control_lpddr2io1_0);
+	writel(lpddr2io, (*ctrl)->control_lpddr2io1_1);
 	/* No pull for GR10 as per hw team's recommendation */
 	writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK,
-		&lpddr2io_regs->control_lpddr2io1_2);
-	writel(CONTROL_LPDDR2IO_3_VAL, &lpddr2io_regs->control_lpddr2io1_3);
+		(*ctrl)->control_lpddr2io1_2);
+	writel(CONTROL_LPDDR2IO_3_VAL, (*ctrl)->control_lpddr2io1_3);
 
 	/* EMIF2 */
-	writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_0);
-	writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_1);
+	writel(lpddr2io, (*ctrl)->control_lpddr2io2_0);
+	writel(lpddr2io, (*ctrl)->control_lpddr2io2_1);
 	/* No pull for GR10 as per hw team's recommendation */
 	writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK,
-		&lpddr2io_regs->control_lpddr2io2_2);
-	writel(CONTROL_LPDDR2IO_3_VAL, &lpddr2io_regs->control_lpddr2io2_3);
+		(*ctrl)->control_lpddr2io2_2);
+	writel(CONTROL_LPDDR2IO_3_VAL, (*ctrl)->control_lpddr2io2_3);
 
 	/*
 	 * Some of these settings (TRIM values) come from eFuse and are
@@ -93,16 +89,16 @@ void do_io_settings(void)
 	 * calibration of the device. Do the software over-ride only if
 	 * the device is not correctly trimmed
 	 */
-	if (!(readl(&ctrl->control_std_fuse_opp_bgap) & 0xFFFF)) {
+	if (!(readl((*ctrl)->control_std_fuse_opp_bgap) & 0xFFFF)) {
 
 		writel(LDOSRAM_VOLT_CTRL_OVERRIDE,
-			&ctrl->control_ldosram_iva_voltage_ctrl);
+			(*ctrl)->control_ldosram_iva_voltage_ctrl);
 
 		writel(LDOSRAM_VOLT_CTRL_OVERRIDE,
-			&ctrl->control_ldosram_mpu_voltage_ctrl);
+			(*ctrl)->control_ldosram_mpu_voltage_ctrl);
 
 		writel(LDOSRAM_VOLT_CTRL_OVERRIDE,
-			&ctrl->control_ldosram_core_voltage_ctrl);
+			(*ctrl)->control_ldosram_core_voltage_ctrl);
 	}
 
 	/*
@@ -110,11 +106,11 @@ void do_io_settings(void)
 	 *	i. unconditionally for all 4430
 	 *	ii. only if un-trimmed for 4460
 	 */
-	if (!readl(&ctrl->control_efuse_1))
-		writel(CONTROL_EFUSE_1_OVERRIDE, &ctrl->control_efuse_1);
+	if (!readl((*ctrl)->control_efuse_1))
+		writel(CONTROL_EFUSE_1_OVERRIDE, (*ctrl)->control_efuse_1);
 
-	if ((omap4_rev < OMAP4460_ES1_0) || !readl(&ctrl->control_efuse_2))
-		writel(CONTROL_EFUSE_2_OVERRIDE, &ctrl->control_efuse_2);
+	if ((omap4_rev < OMAP4460_ES1_0) || !readl((*ctrl)->control_efuse_2))
+		writel(CONTROL_EFUSE_2_OVERRIDE, (*ctrl)->control_efuse_2);
 }
 #endif /* CONFIG_SPL_BUILD */
 
diff --git a/arch/arm/cpu/armv7/omap4/prcm-regs.c b/arch/arm/cpu/armv7/omap4/prcm-regs.c
index d19e5b4..8f63283 100644
--- a/arch/arm/cpu/armv7/omap4/prcm-regs.c
+++ b/arch/arm/cpu/armv7/omap4/prcm-regs.c
@@ -265,3 +265,23 @@ struct prcm_regs const omap4_prcm = {
 	.prm_vc_cfg_i2c_mode = 0x4a307ba8,
 	.prm_vc_cfg_i2c_clk = 0x4a307bac,
 };
+
+struct omap_sys_ctrl_regs const omap4_ctrl = {
+	.control_id_code			= 0x4A002204,
+	.control_std_fuse_opp_bgap		= 0x4a002260,
+	.control_status				= 0x4a0022c4,
+	.control_ldosram_iva_voltage_ctrl	= 0x4A002320,
+	.control_ldosram_mpu_voltage_ctrl	= 0x4A002324,
+	.control_ldosram_core_voltage_ctrl	= 0x4A002328,
+	.control_pbiaslite			= 0x4A100600,
+	.control_lpddr2io1_0			= 0x4A100638,
+	.control_lpddr2io1_1			= 0x4A10063C,
+	.control_lpddr2io1_2			= 0x4A100640,
+	.control_lpddr2io1_3			= 0x4A100644,
+	.control_lpddr2io2_0			= 0x4A100648,
+	.control_lpddr2io2_1			= 0x4A10064C,
+	.control_lpddr2io2_2			= 0x4A100650,
+	.control_lpddr2io2_3			= 0x4A100654,
+	.control_efuse_1			= 0x4A100700,
+	.control_efuse_2			= 0x4A100704,
+};
diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c
index f843159..e1388bb 100644
--- a/arch/arm/cpu/armv7/omap5/hw_data.c
+++ b/arch/arm/cpu/armv7/omap5/hw_data.c
@@ -37,6 +37,8 @@ struct prcm_regs const **prcm =
 			(struct prcm_regs const **) OMAP_SRAM_SCRATCH_PRCM_PTR;
 struct dplls const **dplls_data =
 			(struct dplls const **) OMAP_SRAM_SCRATCH_DPLLS_PTR;
+struct omap_sys_ctrl_regs const **ctrl =
+	(struct omap_sys_ctrl_regs const **)OMAP5_SRAM_SCRATCH_SYS_CTRL;
 
 static const struct dpll_params mpu_dpll_params_1_5ghz[NUM_SYS_CLKS] = {
 	{125, 0, 1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
@@ -422,6 +424,6 @@ void hw_data_init(void)
 	default:
 		printf("\n INVALID OMAP REVISION ");
 	}
-
+	*ctrl = &omap5_ctrl;
 	prcm_init(omap_vcores);
 }
diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c
index 4def422..1863c69 100644
--- a/arch/arm/cpu/armv7/omap5/hwinit.c
+++ b/arch/arm/cpu/armv7/omap5/hwinit.c
@@ -56,76 +56,71 @@ const struct gpio_bank *const omap_gpio_bank = gpio_bank_54xx;
 /* LPDDR2 specific IO settings */
 static void io_settings_lpddr2(void)
 {
-	struct omap_sys_ctrl_regs *ioregs_base =
-		      (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
-
 	writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
-				&(ioregs_base->control_ddrch1_0));
+				(*ctrl)->control_ddrch1_0);
 	writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
-				&(ioregs_base->control_ddrch1_1));
+				(*ctrl)->control_ddrch1_1);
 	writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
-				&(ioregs_base->control_ddrch2_0));
+				(*ctrl)->control_ddrch2_0);
 	writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
-				&(ioregs_base->control_ddrch2_1));
+				(*ctrl)->control_ddrch2_1);
 	writel(DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN,
-				&(ioregs_base->control_lpddr2ch1_0));
+				(*ctrl)->control_lpddr2ch1_0);
 	writel(DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN,
-				&(ioregs_base->control_lpddr2ch1_1));
+				(*ctrl)->control_lpddr2ch1_1);
 	writel(DDR_IO_0_DDR2_DQ_INT_EN_ALL_DDR3_CA_DIS_ALL,
-				&(ioregs_base->control_ddrio_0));
+				(*ctrl)->control_ddrio_0);
 	writel(DDR_IO_1_DQ_OUT_EN_ALL_DQ_INT_EN_ALL,
-				&(ioregs_base->control_ddrio_1));
+				(*ctrl)->control_ddrio_1);
 	writel(DDR_IO_2_CA_OUT_EN_ALL_CA_INT_EN_ALL,
-				&(ioregs_base->control_ddrio_2));
+				(*ctrl)->control_ddrio_2);
 }
 
 /* DDR3 specific IO settings */
 static void io_settings_ddr3(void)
 {
 	u32 io_settings = 0;
-	struct omap_sys_ctrl_regs *ioregs_base =
-		      (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
 
 	writel(DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL,
-				&(ioregs_base->control_ddr3ch1_0));
+				(*ctrl)->control_ddr3ch1_0);
 	writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL,
-				&(ioregs_base->control_ddrch1_0));
+				(*ctrl)->control_ddrch1_0);
 	writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL,
-				&(ioregs_base->control_ddrch1_1));
+				(*ctrl)->control_ddrch1_1);
 
 	writel(DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL,
-				&(ioregs_base->control_ddr3ch2_0));
+				(*ctrl)->control_ddr3ch2_0);
 	writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL,
-				&(ioregs_base->control_ddrch2_0));
+				(*ctrl)->control_ddrch2_0);
 	writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL,
-				&(ioregs_base->control_ddrch2_1));
+				(*ctrl)->control_ddrch2_1);
 
 	writel(DDR_IO_0_VREF_CELLS_DDR3_VALUE,
-				&(ioregs_base->control_ddrio_0));
+				(*ctrl)->control_ddrio_0);
 	writel(DDR_IO_1_VREF_CELLS_DDR3_VALUE,
-				&(ioregs_base->control_ddrio_1));
+				(*ctrl)->control_ddrio_1);
 	writel(DDR_IO_2_VREF_CELLS_DDR3_VALUE,
-				&(ioregs_base->control_ddrio_2));
+				(*ctrl)->control_ddrio_2);
 
 	/* omap5432 does not use lpddr2 */
-	writel(0x0, &(ioregs_base->control_lpddr2ch1_0));
-	writel(0x0, &(ioregs_base->control_lpddr2ch1_1));
+	writel(0x0, (*ctrl)->control_lpddr2ch1_0);
+	writel(0x0, (*ctrl)->control_lpddr2ch1_1);
 
 	writel(SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES,
-			&(ioregs_base->control_emif1_sdram_config_ext));
+			(*ctrl)->control_emif1_sdram_config_ext);
 	writel(SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES,
-			&(ioregs_base->control_emif2_sdram_config_ext));
+			(*ctrl)->control_emif2_sdram_config_ext);
 
 	/* Disable DLL select */
-	io_settings = (readl(&(ioregs_base->control_port_emif1_sdram_config))
+	io_settings = (readl((*ctrl)->control_port_emif1_sdram_config)
 							& 0xFFEFFFFF);
 	writel(io_settings,
-		&(ioregs_base->control_port_emif1_sdram_config));
+		(*ctrl)->control_port_emif1_sdram_config);
 
-	io_settings = (readl(&(ioregs_base->control_port_emif2_sdram_config))
+	io_settings = (readl((*ctrl)->control_port_emif2_sdram_config)
 							& 0xFFEFFFFF);
 	writel(io_settings,
-		&(ioregs_base->control_port_emif2_sdram_config));
+		(*ctrl)->control_port_emif2_sdram_config);
 }
 
 /*
@@ -134,62 +129,60 @@ static void io_settings_ddr3(void)
 void do_io_settings(void)
 {
 	u32 io_settings = 0, mask = 0;
-	struct omap_sys_ctrl_regs *ioregs_base =
-		      (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
 
 	/* Impedance settings EMMC, C2C 1,2, hsi2 */
 	mask = (ds_mask << 2) | (ds_mask << 8) |
 		(ds_mask << 16) | (ds_mask << 18);
-	io_settings = readl(&(ioregs_base->control_smart1io_padconf_0)) &
+	io_settings = readl((*ctrl)->control_smart1io_padconf_0) &
 				(~mask);
 	io_settings |= (ds_60_ohm << 8) | (ds_45_ohm << 16) |
 			(ds_45_ohm << 18) | (ds_60_ohm << 2);
-	writel(io_settings, &(ioregs_base->control_smart1io_padconf_0));
+	writel(io_settings, (*ctrl)->control_smart1io_padconf_0);
 
 	/* Impedance settings Mcspi2 */
 	mask = (ds_mask << 30);
-	io_settings = readl(&(ioregs_base->control_smart1io_padconf_1)) &
+	io_settings = readl((*ctrl)->control_smart1io_padconf_1) &
 			(~mask);
 	io_settings |= (ds_60_ohm << 30);
-	writel(io_settings, &(ioregs_base->control_smart1io_padconf_1));
+	writel(io_settings, (*ctrl)->control_smart1io_padconf_1);
 
 	/* Impedance settings C2C 3,4 */
 	mask = (ds_mask << 14) | (ds_mask << 16);
-	io_settings = readl(&(ioregs_base->control_smart1io_padconf_2)) &
+	io_settings = readl((*ctrl)->control_smart1io_padconf_2) &
 			(~mask);
 	io_settings |= (ds_45_ohm << 14) | (ds_45_ohm << 16);
-	writel(io_settings, &(ioregs_base->control_smart1io_padconf_2));
+	writel(io_settings, (*ctrl)->control_smart1io_padconf_2);
 
 	/* Slew rate settings EMMC, C2C 1,2 */
 	mask = (sc_mask << 8) | (sc_mask << 16) | (sc_mask << 18);
-	io_settings = readl(&(ioregs_base->control_smart2io_padconf_0)) &
+	io_settings = readl((*ctrl)->control_smart2io_padconf_0) &
 			(~mask);
 	io_settings |= (sc_fast << 8) | (sc_na << 16) | (sc_na << 18);
-	writel(io_settings, &(ioregs_base->control_smart2io_padconf_0));
+	writel(io_settings, (*ctrl)->control_smart2io_padconf_0);
 
 	/* Slew rate settings hsi2, Mcspi2 */
 	mask = (sc_mask << 24) | (sc_mask << 28);
-	io_settings = readl(&(ioregs_base->control_smart2io_padconf_1)) &
+	io_settings = readl((*ctrl)->control_smart2io_padconf_1) &
 			(~mask);
 	io_settings |= (sc_fast << 28) | (sc_fast << 24);
-	writel(io_settings, &(ioregs_base->control_smart2io_padconf_1));
+	writel(io_settings, (*ctrl)->control_smart2io_padconf_1);
 
 	/* Slew rate settings C2C 3,4 */
 	mask = (sc_mask << 16) | (sc_mask << 18);
-	io_settings = readl(&(ioregs_base->control_smart2io_padconf_2)) &
+	io_settings = readl((*ctrl)->control_smart2io_padconf_2) &
 			(~mask);
 	io_settings |= (sc_na << 16) | (sc_na << 18);
-	writel(io_settings, &(ioregs_base->control_smart2io_padconf_2));
+	writel(io_settings, (*ctrl)->control_smart2io_padconf_2);
 
 	/* impedance and slew rate settings for usb */
 	mask = (usb_i_mask << 29) | (usb_i_mask << 26) | (usb_i_mask << 23) |
 		(usb_i_mask << 20) | (usb_i_mask << 17) | (usb_i_mask << 14);
-	io_settings = readl(&(ioregs_base->control_smart3io_padconf_1)) &
+	io_settings = readl((*ctrl)->control_smart3io_padconf_1) &
 			(~mask);
 	io_settings |= (ds_60_ohm << 29) | (ds_60_ohm << 26) |
 		       (ds_60_ohm << 23) | (sc_fast << 20) |
 		       (sc_fast << 17) | (sc_fast << 14);
-	writel(io_settings, &(ioregs_base->control_smart3io_padconf_1));
+	writel(io_settings, (*ctrl)->control_smart3io_padconf_1);
 
 	if (emif_sdram_type() == EMIF_SDRAM_TYPE_LPDDR2)
 		io_settings_lpddr2();
@@ -197,25 +190,22 @@ void do_io_settings(void)
 		io_settings_ddr3();
 
 	/* Efuse settings */
-	writel(EFUSE_1, &(ioregs_base->control_efuse_1));
-	writel(EFUSE_2, &(ioregs_base->control_efuse_2));
-	writel(EFUSE_3, &(ioregs_base->control_efuse_3));
-	writel(EFUSE_4, &(ioregs_base->control_efuse_4));
+	writel(EFUSE_1, (*ctrl)->control_efuse_1);
+	writel(EFUSE_2, (*ctrl)->control_efuse_2);
+	writel(EFUSE_3, (*ctrl)->control_efuse_3);
+	writel(EFUSE_4, (*ctrl)->control_efuse_4);
 }
 #endif
 
 void config_data_eye_leveling_samples(u32 emif_base)
 {
-	struct omap_sys_ctrl_regs *ioregs_base =
-		(struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
-
 	/*EMIF_SDRAM_CONFIG_EXT-Read data eye leveling no of samples =4*/
 	if (emif_base == EMIF1_BASE)
 		writel(SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES,
-			&(ioregs_base->control_emif1_sdram_config_ext));
+			(*ctrl)->control_emif1_sdram_config_ext);
 	else if (emif_base == EMIF2_BASE)
 		writel(SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES,
-			&(ioregs_base->control_emif2_sdram_config_ext));
+			(*ctrl)->control_emif2_sdram_config_ext);
 }
 
 void init_omap_revision(void)
diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c
index c12f862..07e7ade 100644
--- a/arch/arm/cpu/armv7/omap5/prcm-regs.c
+++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c
@@ -276,3 +276,77 @@ struct prcm_regs const omap5_es1_prcm = {
 	.prm_sldo_mm_setup = 0x4ae07bd4,
 	.prm_sldo_mm_ctrl = 0x4ae07bd8,
 };
+
+struct omap_sys_ctrl_regs const omap5_ctrl = {
+	.control_status				= 0x4A002134,
+	.control_paconf_global			= 0x4A002DA0,
+	.control_paconf_mode			= 0x4A002DA4,
+	.control_smart1io_padconf_0		= 0x4A002DA8,
+	.control_smart1io_padconf_1		= 0x4A002DAC,
+	.control_smart1io_padconf_2		= 0x4A002DB0,
+	.control_smart2io_padconf_0		= 0x4A002DB4,
+	.control_smart2io_padconf_1		= 0x4A002DB8,
+	.control_smart2io_padconf_2		= 0x4A002DBC,
+	.control_smart3io_padconf_0		= 0x4A002DC0,
+	.control_smart3io_padconf_1		= 0x4A002DC4,
+	.control_pbias				= 0x4A002E00,
+	.control_i2c_0				= 0x4A002E04,
+	.control_camera_rx			= 0x4A002E08,
+	.control_hdmi_tx_phy			= 0x4A002E0C,
+	.control_uniportm			= 0x4A002E10,
+	.control_dsiphy				= 0x4A002E14,
+	.control_mcbsplp			= 0x4A002E18,
+	.control_usb2phycore			= 0x4A002E1C,
+	.control_hdmi_1				= 0x4A002E20,
+	.control_hsi				= 0x4A002E24,
+	.control_ddr3ch1_0			= 0x4A002E30,
+	.control_ddr3ch2_0			= 0x4A002E34,
+	.control_ddrch1_0			= 0x4A002E38,
+	.control_ddrch1_1			= 0x4A002E3C,
+	.control_ddrch2_0			= 0x4A002E40,
+	.control_ddrch2_1			= 0x4A002E44,
+	.control_lpddr2ch1_0			= 0x4A002E48,
+	.control_lpddr2ch1_1			= 0x4A002E4C,
+	.control_ddrio_0			= 0x4A002E50,
+	.control_ddrio_1			= 0x4A002E54,
+	.control_ddrio_2			= 0x4A002E58,
+	.control_hyst_1				= 0x4A002E5C,
+	.control_usbb_hsic_control		= 0x4A002E60,
+	.control_c2c				= 0x4A002E64,
+	.control_core_control_spare_rw		= 0x4A002E68,
+	.control_core_control_spare_r		= 0x4A002E6C,
+	.control_core_control_spare_r_c0	= 0x4A002E70,
+	.control_srcomp_north_side		= 0x4A002E74,
+	.control_srcomp_south_side		= 0x4A002E78,
+	.control_srcomp_east_side		= 0x4A002E7C,
+	.control_srcomp_west_side		= 0x4A002E80,
+	.control_srcomp_code_latch		= 0x4A002E84,
+	.control_port_emif1_sdram_config	= 0x4AE0C110,
+	.control_port_emif1_lpddr2_nvm_config	= 0x4AE0C114,
+	.control_port_emif2_sdram_config	= 0x4AE0C118,
+	.control_emif1_sdram_config_ext		= 0x4AE0C144,
+	.control_emif2_sdram_config_ext		= 0x4AE0C148,
+	.control_smart1nopmio_padconf_0		= 0x4AE0CDA0,
+	.control_smart1nopmio_padconf_1		= 0x4AE0CDA4,
+	.control_padconf_mode			= 0x4AE0CDA8,
+	.control_xtal_oscillator		= 0x4AE0CDAC,
+	.control_i2c_2				= 0x4AE0CDB0,
+	.control_ckobuffer			= 0x4AE0CDB4,
+	.control_wkup_control_spare_rw		= 0x4AE0CDB8,
+	.control_wkup_control_spare_r		= 0x4AE0CDBC,
+	.control_wkup_control_spare_r_c0	= 0x4AE0CDC0,
+	.control_srcomp_east_side_wkup		= 0x4AE0CDC4,
+	.control_efuse_1			= 0x4AE0CDC8,
+	.control_efuse_2			= 0x4AE0CDCC,
+	.control_efuse_3			= 0x4AE0CDD0,
+	.control_efuse_4			= 0x4AE0CDD4,
+	.control_efuse_5			= 0x4AE0CDD8,
+	.control_efuse_6			= 0x4AE0CDDC,
+	.control_efuse_7			= 0x4AE0CDE0,
+	.control_efuse_8			= 0x4AE0CDE4,
+	.control_efuse_9			= 0x4AE0CDE8,
+	.control_efuse_10			= 0x4AE0CDEC,
+	.control_efuse_11			= 0x4AE0CDF0,
+	.control_efuse_12			= 0x4AE0CDF4,
+	.control_efuse_13			= 0x4AE0CDF8,
+};
diff --git a/arch/arm/include/asm/arch-omap4/omap.h b/arch/arm/include/asm/arch-omap4/omap.h
index 1c0ce9b..ea7471a 100644
--- a/arch/arm/include/asm/arch-omap4/omap.h
+++ b/arch/arm/include/asm/arch-omap4/omap.h
@@ -132,34 +132,6 @@ struct s32ktimer {
 #define DEVICE_TYPE_MASK (0x7 << DEVICE_TYPE_SHIFT)
 #define DEVICE_GP 0x3
 
-struct omap_sys_ctrl_regs {
-	unsigned int pad1[129];
-	unsigned int control_id_code;			/* 0x4A002204 */
-	unsigned int pad11[22];
-	unsigned int control_std_fuse_opp_bgap;		/* 0x4a002260 */
-	unsigned int pad2[24];				/* 0x4a002264 */
-	unsigned int control_status;			/* 0x4a0022c4 */
-	unsigned int pad3[22];				/* 0x4a0022c8 */
-	unsigned int control_ldosram_iva_voltage_ctrl;	/* 0x4A002320 */
-	unsigned int control_ldosram_mpu_voltage_ctrl;	/* 0x4A002324 */
-	unsigned int control_ldosram_core_voltage_ctrl;	/* 0x4A002328 */
-	unsigned int pad4[260277];
-	unsigned int control_pbiaslite;                 /* 0x4A100600 */
-	unsigned int pad5[63];
-	unsigned int control_efuse_1;			/* 0x4A100700 */
-	unsigned int control_efuse_2;			/* 0x4A100704 */
-};
-
-struct control_lpddr2io_regs {
-	unsigned int control_lpddr2io1_0;
-	unsigned int control_lpddr2io1_1;
-	unsigned int control_lpddr2io1_2;
-	unsigned int control_lpddr2io1_3;
-	unsigned int control_lpddr2io2_0;
-	unsigned int control_lpddr2io2_1;
-	unsigned int control_lpddr2io2_2;
-	unsigned int control_lpddr2io2_3;
-};
 #endif /* __ASSEMBLY__ */
 
 /*
@@ -180,7 +152,8 @@ struct control_lpddr2io_regs {
 #define OMAP4_SRAM_SCRATCH_EMIF_T_DEN	(SRAM_SCRATCH_SPACE_ADDR + 0x10)
 #define OMAP_SRAM_SCRATCH_PRCM_PTR      (SRAM_SCRATCH_SPACE_ADDR + 0x14)
 #define OMAP_SRAM_SCRATCH_DPLLS_PTR     (SRAM_SCRATCH_SPACE_ADDR + 0x18)
-#define OMAP4_SRAM_SCRATCH_SPACE_END	(SRAM_SCRATCH_SPACE_ADDR + 0x1C)
+#define OMAP4_SRAM_SCRATCH_SYS_CTRL	(SRAM_SCRATCH_SPACE_ADDR + 0x1C)
+#define OMAP4_SRAM_SCRATCH_SPACE_END	(SRAM_SCRATCH_SPACE_ADDR + 0x20)
 
 /* ROM code defines */
 /* Boot device */
diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h
index 7123694..3ec8a9a 100644
--- a/arch/arm/include/asm/arch-omap5/omap.h
+++ b/arch/arm/include/asm/arch-omap5/omap.h
@@ -131,87 +131,6 @@ struct s32ktimer {
 #define DEVICE_TYPE_MASK (0x7 << DEVICE_TYPE_SHIFT)
 #define DEVICE_GP 0x3
 
-struct omap_sys_ctrl_regs {
-	u32 pad0[77]; /* 0x4A002000 */
-	u32 control_status; /* 0x4A002134 */
-	u32 pad1[794]; /* 0x4A002138 */
-	u32 control_paconf_global; /* 0x4A002DA0 */
-	u32 control_paconf_mode;  /* 0x4A002DA4 */
-	u32 control_smart1io_padconf_0; /* 0x4A002DA8 */
-	u32 control_smart1io_padconf_1; /* 0x4A002DAC */
-	u32 control_smart1io_padconf_2; /* 0x4A002DB0 */
-	u32 control_smart2io_padconf_0; /* 0x4A002DB4 */
-	u32 control_smart2io_padconf_1; /* 0x4A002DB8 */
-	u32 control_smart2io_padconf_2; /* 0x4A002DBC */
-	u32 control_smart3io_padconf_0; /* 0x4A002DC0 */
-	u32 control_smart3io_padconf_1; /* 0x4A002DC4 */
-	u32 pad2[14];
-	u32 control_pbias; /* 0x4A002E00 */
-	u32 control_i2c_0; /* 0x4A002E04 */
-	u32 control_camera_rx; /* 0x4A002E08 */
-	u32 control_hdmi_tx_phy; /* 0x4A002E0C */
-	u32 control_uniportm; /* 0x4A002E10 */
-	u32 control_dsiphy; /* 0x4A002E14 */
-	u32 control_mcbsplp; /* 0x4A002E18 */
-	u32 control_usb2phycore; /* 0x4A002E1C */
-	u32 control_hdmi_1; /*0x4A002E20*/
-	u32 control_hsi; /*0x4A002E24*/
-	u32 pad3[2];
-	u32 control_ddr3ch1_0; /*0x4A002E30*/
-	u32 control_ddr3ch2_0; /*0x4A002E34*/
-	u32 control_ddrch1_0;	/*0x4A002E38*/
-	u32 control_ddrch1_1;	/*0x4A002E3C*/
-	u32 control_ddrch2_0;	/*0x4A002E40*/
-	u32 control_ddrch2_1;	/*0x4A002E44*/
-	u32 control_lpddr2ch1_0; /*0x4A002E48*/
-	u32 control_lpddr2ch1_1; /*0x4A002E4C*/
-	u32 control_ddrio_0;  /*0x4A002E50*/
-	u32 control_ddrio_1;  /*0x4A002E54*/
-	u32 control_ddrio_2;  /*0x4A002E58*/
-	u32 control_hyst_1; /*0x4A002E5C*/
-	u32 control_usbb_hsic_control; /*0x4A002E60*/
-	u32 control_c2c; /*0x4A002E64*/
-	u32 control_core_control_spare_rw; /*0x4A002E68*/
-	u32 control_core_control_spare_r; /*0x4A002E6C*/
-	u32 control_core_control_spare_r_c0; /*0x4A002E70*/
-	u32 control_srcomp_north_side; /*0x4A002E74*/
-	u32 control_srcomp_south_side; /*0x4A002E78*/
-	u32 control_srcomp_east_side; /*0x4A002E7C*/
-	u32 control_srcomp_west_side; /*0x4A002E80*/
-	u32 control_srcomp_code_latch; /*0x4A002E84*/
-	u32 pad4[3679394];
-	u32 control_port_emif1_sdram_config;		/*0x4AE0C110*/
-	u32 control_port_emif1_lpddr2_nvm_config;	/*0x4AE0C114*/
-	u32 control_port_emif2_sdram_config;		/*0x4AE0C118*/
-	u32 pad5[10];
-	u32 control_emif1_sdram_config_ext;		/* 0x4AE0C144 */
-	u32 control_emif2_sdram_config_ext;		/* 0x4AE0C148 */
-	u32 pad6[789];
-	u32 control_smart1nopmio_padconf_0; /* 0x4AE0CDA0 */
-	u32 control_smart1nopmio_padconf_1; /* 0x4AE0CDA4 */
-	u32 control_padconf_mode; /* 0x4AE0CDA8 */
-	u32 control_xtal_oscillator; /* 0x4AE0CDAC */
-	u32 control_i2c_2; /* 0x4AE0CDB0 */
-	u32 control_ckobuffer; /* 0x4AE0CDB4 */
-	u32 control_wkup_control_spare_rw; /* 0x4AE0CDB8 */
-	u32 control_wkup_control_spare_r; /* 0x4AE0CDBC */
-	u32 control_wkup_control_spare_r_c0; /* 0x4AE0CDC0 */
-	u32 control_srcomp_east_side_wkup; /* 0x4AE0CDC4 */
-	u32 control_efuse_1; /* 0x4AE0CDC8 */
-	u32 control_efuse_2; /* 0x4AE0CDCC */
-	u32 control_efuse_3; /* 0x4AE0CDD0 */
-	u32 control_efuse_4; /* 0x4AE0CDD4 */
-	u32 control_efuse_5; /* 0x4AE0CDD8 */
-	u32 control_efuse_6; /* 0x4AE0CDDC */
-	u32 control_efuse_7; /* 0x4AE0CDE0 */
-	u32 control_efuse_8; /* 0x4AE0CDE4 */
-	u32 control_efuse_9; /* 0x4AE0CDE8 */
-	u32 control_efuse_10; /* 0x4AE0CDEC */
-	u32 control_efuse_11; /* 0x4AE0CDF0 */
-	u32 control_efuse_12; /* 0x4AE0CDF4 */
-	u32 control_efuse_13; /* 0x4AE0CDF8 */
-};
-
 /* Output impedance control */
 #define ds_120_ohm	0x0
 #define ds_60_ohm	0x1
@@ -273,7 +192,8 @@ struct omap_sys_ctrl_regs {
 #define OMAP5_SRAM_SCRATCH_EMIF_T_DEN	(SRAM_SCRATCH_SPACE_ADDR + 0x10)
 #define OMAP_SRAM_SCRATCH_PRCM_PTR      (SRAM_SCRATCH_SPACE_ADDR + 0x14)
 #define OMAP_SRAM_SCRATCH_DPLLS_PTR     (SRAM_SCRATCH_SPACE_ADDR + 0x18)
-#define OMAP5_SRAM_SCRATCH_SPACE_END	(SRAM_SCRATCH_SPACE_ADDR + 0x1C)
+#define OMAP5_SRAM_SCRATCH_SYS_CTRL	(SRAM_SCRATCH_SPACE_ADDR + 0x1C)
+#define OMAP5_SRAM_SCRATCH_SPACE_END	(SRAM_SCRATCH_SPACE_ADDR + 0x20)
 
 /* Silicon revisions */
 #define OMAP4430_SILICON_ID_INVALID	0xFFFFFFFF
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index a45ede4..ef1621f 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -326,6 +326,94 @@ struct prcm_regs {
 	u32 prm_vc_cfg_channel;
 };
 
+struct omap_sys_ctrl_regs {
+	u32 control_status;
+	u32 control_id_code;
+	u32 control_std_fuse_opp_bgap;
+	u32 control_ldosram_iva_voltage_ctrl;
+	u32 control_ldosram_mpu_voltage_ctrl;
+	u32 control_ldosram_core_voltage_ctrl;
+	u32 control_paconf_global;
+	u32 control_paconf_mode;
+	u32 control_smart1io_padconf_0;
+	u32 control_smart1io_padconf_1;
+	u32 control_smart1io_padconf_2;
+	u32 control_smart2io_padconf_0;
+	u32 control_smart2io_padconf_1;
+	u32 control_smart2io_padconf_2;
+	u32 control_smart3io_padconf_0;
+	u32 control_smart3io_padconf_1;
+	u32 control_pbias;
+	u32 control_i2c_0;
+	u32 control_camera_rx;
+	u32 control_hdmi_tx_phy;
+	u32 control_uniportm;
+	u32 control_dsiphy;
+	u32 control_mcbsplp;
+	u32 control_usb2phycore;
+	u32 control_hdmi_1;
+	u32 control_hsi;
+	u32 control_ddr3ch1_0;
+	u32 control_ddr3ch2_0;
+	u32 control_ddrch1_0;
+	u32 control_ddrch1_1;
+	u32 control_ddrch2_0;
+	u32 control_ddrch2_1;
+	u32 control_lpddr2ch1_0;
+	u32 control_lpddr2ch1_1;
+	u32 control_ddrio_0;
+	u32 control_ddrio_1;
+	u32 control_ddrio_2;
+	u32 control_lpddr2io1_0;
+	u32 control_lpddr2io1_1;
+	u32 control_lpddr2io1_2;
+	u32 control_lpddr2io1_3;
+	u32 control_lpddr2io2_0;
+	u32 control_lpddr2io2_1;
+	u32 control_lpddr2io2_2;
+	u32 control_lpddr2io2_3;
+	u32 control_hyst_1;
+	u32 control_usbb_hsic_control;
+	u32 control_c2c;
+	u32 control_core_control_spare_rw;
+	u32 control_core_control_spare_r;
+	u32 control_core_control_spare_r_c0;
+	u32 control_srcomp_north_side;
+	u32 control_srcomp_south_side;
+	u32 control_srcomp_east_side;
+	u32 control_srcomp_west_side;
+	u32 control_srcomp_code_latch;
+	u32 control_pbiaslite;
+	u32 control_port_emif1_sdram_config;
+	u32 control_port_emif1_lpddr2_nvm_config;
+	u32 control_port_emif2_sdram_config;
+	u32 control_emif1_sdram_config_ext;
+	u32 control_emif2_sdram_config_ext;
+	u32 control_smart1nopmio_padconf_0;
+	u32 control_smart1nopmio_padconf_1;
+	u32 control_padconf_mode;
+	u32 control_xtal_oscillator;
+	u32 control_i2c_2;
+	u32 control_ckobuffer;
+	u32 control_wkup_control_spare_rw;
+	u32 control_wkup_control_spare_r;
+	u32 control_wkup_control_spare_r_c0;
+	u32 control_srcomp_east_side_wkup;
+	u32 control_efuse_1;
+	u32 control_efuse_2;
+	u32 control_efuse_3;
+	u32 control_efuse_4;
+	u32 control_efuse_5;
+	u32 control_efuse_6;
+	u32 control_efuse_7;
+	u32 control_efuse_8;
+	u32 control_efuse_9;
+	u32 control_efuse_10;
+	u32 control_efuse_11;
+	u32 control_efuse_12;
+	u32 control_efuse_13;
+};
+
 struct dpll_params {
 	u32 m;
 	u32 n;
@@ -390,6 +478,9 @@ extern struct prcm_regs const omap4_prcm;
 extern struct dplls const **dplls_data;
 extern struct vcores_data *omap_vcores;
 extern const u32 sys_clk_array[8];
+extern struct omap_sys_ctrl_regs const **ctrl;
+extern struct omap_sys_ctrl_regs const omap4_ctrl;
+extern struct omap_sys_ctrl_regs const omap5_ctrl;
 
 void hw_data_init(void);
 
diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c
index afd9b30..f34214b 100644
--- a/drivers/mmc/omap_hsmmc.c
+++ b/drivers/mmc/omap_hsmmc.c
@@ -50,18 +50,15 @@ static struct mmc hsmmc_dev[2];
 static void omap4_vmmc_pbias_config(struct mmc *mmc)
 {
 	u32 value = 0;
-	struct omap_sys_ctrl_regs *const ctrl =
-		(struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
 
-
-	value = readl(&ctrl->control_pbiaslite);
+	value = readl((*ctrl)->control_pbiaslite);
 	value &= ~(MMC1_PBIASLITE_PWRDNZ | MMC1_PWRDNZ);
-	writel(value, &ctrl->control_pbiaslite);
+	writel(value, (*ctrl)->control_pbiaslite);
 	/* set VMMC to 3V */
 	twl6030_power_mmc_init();
-	value = readl(&ctrl->control_pbiaslite);
+	value = readl((*ctrl)->control_pbiaslite);
 	value |= MMC1_PBIASLITE_VMODE | MMC1_PBIASLITE_PWRDNZ | MMC1_PWRDNZ;
-	writel(value, &ctrl->control_pbiaslite);
+	writel(value, (*ctrl)->control_pbiaslite);
 }
 #endif
 
@@ -69,26 +66,24 @@ static void omap4_vmmc_pbias_config(struct mmc *mmc)
 static void omap5_pbias_config(struct mmc *mmc)
 {
 	u32 value = 0;
-	struct omap_sys_ctrl_regs *const ctrl =
-		(struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
 
-	value = readl(&ctrl->control_pbias);
+	value = readl((*ctrl)->control_pbias);
 	value &= ~(SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ);
 	value |= SDCARD_BIAS_HIZ_MODE;
-	writel(value, &ctrl->control_pbias);
+	writel(value, (*ctrl)->control_pbias);
 
 	twl6035_mmc1_poweron_ldo();
 
-	value = readl(&ctrl->control_pbias);
+	value = readl((*ctrl)->control_pbias);
 	value &= ~SDCARD_BIAS_HIZ_MODE;
 	value |= SDCARD_PBIASLITE_VMODE | SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ;
-	writel(value, &ctrl->control_pbias);
+	writel(value, (*ctrl)->control_pbias);
 
-	value = readl(&ctrl->control_pbias);
+	value = readl((*ctrl)->control_pbias);
 	if (value & (1 << 23)) {
 		value &= ~(SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ);
 		value |= SDCARD_BIAS_HIZ_MODE;
-		writel(value, &ctrl->control_pbias);
+		writel(value, (*ctrl)->control_pbias);
 	}
 }
 #endif
