diff mbox

[U-Boot,v2,09/22] powerpc/mpc85xx: fix TLB alignment

Message ID 1351562710-6237-10-git-send-email-scottwood@freescale.com
State Accepted
Delegated to: Scott Wood
Headers show

Commit Message

Scott Wood Oct. 30, 2012, 2:04 a.m. UTC
In the RAMBOOT/SPL case we were creating a TLB entry starting at
CONFIG_SYS_MONITOR_BASE, and just hoping that the base was properly
aligned for the TLB entry size.  This turned out to not be the case
with NAND SPL because the main U-Boot starts at an offset into the image
in order to skip the SPL itself.

Fix the TLB entry to always start at a proper alignment.  We still assume that
CONFIG_SYS_MONITOR_BASE doesn't start immediately before a large-page boundary
thus requiring multiple TLB entries.

Signed-off-by: Scott Wood <scottwood@frescale.com>
Cc: Andy Fleming <afleming@freescale.com>
---
 arch/powerpc/cpu/mpc85xx/start.S |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
diff mbox

Patch

diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S
index 7912a4b..577d687 100644
--- a/arch/powerpc/cpu/mpc85xx/start.S
+++ b/arch/powerpc/cpu/mpc85xx/start.S
@@ -1046,8 +1046,8 @@  create_init_ram_area:
 	*/
 	create_tlb1_entry 15, \
 		1, BOOKE_PAGESZ_1M, \
-		CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \
-		CONFIG_SYS_PBI_FLASH_WINDOW, MAS3_SX|MAS3_SW|MAS3_SR, \
+		CONFIG_SYS_MONITOR_BASE & 0xfff00000, MAS2_I|MAS2_G, \
+		CONFIG_SYS_PBI_FLASH_WINDOW & 0xfff00000, MAS3_SX|MAS3_SW|MAS3_SR, \
 		0, r6
 #else
 	/*
@@ -1056,8 +1056,8 @@  create_init_ram_area:
 	 */
 	create_tlb1_entry 15, \
 		1, BOOKE_PAGESZ_1M, \
-		CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \
-		CONFIG_SYS_MONITOR_BASE, MAS3_SX|MAS3_SW|MAS3_SR, \
+		CONFIG_SYS_MONITOR_BASE & 0xfff00000, MAS2_I|MAS2_G, \
+		CONFIG_SYS_MONITOR_BASE & 0xfff00000, MAS3_SX|MAS3_SW|MAS3_SR, \
 		0, r6
 #endif