diff mbox

[U-Boot,v1,2/4] OMAP3: mcx: updated to new hardware revision

Message ID 1350396426-11400-2-git-send-email-sbabic@denx.de
State Accepted
Delegated to: Tom Rini
Headers show

Commit Message

Stefano Babic Oct. 16, 2012, 2:07 p.m. UTC 
Some GPIOs differ in the new revision board.
Previous revision are considered obsolete and
they will not anymore supported.

Signed-off-by: Stefano Babic <sbabic@denx.de>
---
 board/htkw/mcx/mcx.c  |   19 +++----------------
 board/htkw/mcx/mcx.h  |    2 +-
 include/configs/mcx.h |    3 +--
 3 files changed, 5 insertions(+), 19 deletions(-)
diff mbox

Patch

diff --git a/board/htkw/mcx/mcx.c b/board/htkw/mcx/mcx.c
index 7c9d34a..1f9840c 100644
--- a/board/htkw/mcx/mcx.c
+++ b/board/htkw/mcx/mcx.c
@@ -37,12 +37,12 @@ 
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define HOT_WATER_BUTTON	38
+#define HOT_WATER_BUTTON	42
 
 #ifdef CONFIG_USB_EHCI
 static struct omap_usbhs_board_data usbhs_bdata = {
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
 	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 };
 
@@ -87,6 +87,7 @@  int board_late_init(void)
 		return 0;
 
 	setenv("bootcmd", "run swupdate");
+
 	return 0;
 }
 #endif
@@ -108,17 +109,3 @@  int board_mmc_init(bd_t *bis)
 	return omap_mmc_init(0, 0, 0);
 }
 #endif
-
-#ifdef CONFIG_USB_EHCI_OMAP
-#define USB_HOST_PWR_EN		132
-int board_usb_init(void)
-{
-	if (gpio_request(USB_HOST_PWR_EN, "USB_HOST_PWR_EN") < 0) {
-		puts("Failed to get USB_HOST_PWR_EN pin\n");
-		return -ENODEV;
-	}
-	gpio_direction_output(USB_HOST_PWR_EN, 1);
-
-	return 0;
-}
-#endif
diff --git a/board/htkw/mcx/mcx.h b/board/htkw/mcx/mcx.h
index 1003bfd..f9601c6 100644
--- a/board/htkw/mcx/mcx.h
+++ b/board/htkw/mcx/mcx.h
@@ -96,7 +96,7 @@  const omap3_sysinfo sysinfo = {
 	MUX_VAL(CP(GPMC_A7),		(IEN | PTU | EN  | M4)) \
 	MUX_VAL(CP(GPMC_A8),		(IEN | PTU | EN  | M4)) \
 	MUX_VAL(CP(GPMC_A9),		(IEN | PTU | EN  | M4)) \
-	MUX_VAL(CP(GPMC_A10),		(IDIS | PTU | DIS | M4)) \
+	MUX_VAL(CP(GPMC_A10),		(IEN | PTU | EN | M4)) \
 					/* GPIO_43 LCD buffer enable */ \
 	MUX_VAL(CP(GPMC_D0),		(IEN  | PTU | EN  | M0)) \
 	MUX_VAL(CP(GPMC_D1),		(IEN  | PTU | EN  | M0)) \
diff --git a/include/configs/mcx.h b/include/configs/mcx.h
index d3061a2..96e1059 100644
--- a/include/configs/mcx.h
+++ b/include/configs/mcx.h
@@ -115,8 +115,7 @@ 
 #define CONFIG_USB_ULPI
 #define CONFIG_USB_ULPI_VIEWPORT_OMAP
 /*#define CONFIG_EHCI_DCACHE*/ /* leave it disabled for now */
-#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO	154
-#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO	152
+#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO	57
 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
 
 /* commands to include */