diff mbox

[U-Boot,v1,1/4] OMAP3: updated pinmux and environment for new revision of mcx board

Message ID 1350396426-11400-1-git-send-email-sbabic@denx.de
State Accepted
Delegated to: Tom Rini
Headers show

Commit Message

Stefano Babic Oct. 16, 2012, 2:07 p.m. UTC 
The mcx board was slightly modified and the pinmux must be updated.
There is no need to support the old board, that becomes obsolete.

Signed-off-by: Stefano Babic <sbabic@denx.de>
---
 board/htkw/mcx/mcx.h  |   26 +++++++++++++-------------
 include/configs/mcx.h |   12 +++++++-----
 2 files changed, 20 insertions(+), 18 deletions(-)
diff mbox

Patch

diff --git a/board/htkw/mcx/mcx.h b/board/htkw/mcx/mcx.h
index 867cc9e..1003bfd 100644
--- a/board/htkw/mcx/mcx.h
+++ b/board/htkw/mcx/mcx.h
@@ -143,28 +143,28 @@  const omap3_sysinfo sysinfo = {
 	MUX_VAL(CP(DSS_HSYNC),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_VSYNC),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_ACBIAS),		(IDIS | PTD | DIS | M0)) \
-	MUX_VAL(CP(DSS_DATA0),		(IEN | PTU | EN  | M4))\
-	MUX_VAL(CP(DSS_DATA1),		(IEN | PTU | EN  | M4)) \
-	MUX_VAL(CP(DSS_DATA2),		(IEN | PTU | EN  | M4)) \
+	MUX_VAL(CP(DSS_DATA0),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA1),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA2),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA3),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA4),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA5),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA6),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA7),		(IDIS | PTD | DIS | M0)) \
-	MUX_VAL(CP(DSS_DATA8),		(IEN | PTU | EN  | M4)) \
-	MUX_VAL(CP(DSS_DATA9),		(IEN | PTU | EN  | M4)) \
+	MUX_VAL(CP(DSS_DATA8),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA9),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA10),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA11),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA12),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA13),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA14),		(IDIS | PTD | DIS | M0)) \
-	MUX_VAL(CP(DSS_DATA15),		(IDIS | PTD | DIS | M0))\
-	MUX_VAL(CP(DSS_DATA16),		(IEN | PTU | EN  | M4)) \
-	MUX_VAL(CP(DSS_DATA17),		(IEN | PTU | EN  | M4)) \
-	MUX_VAL(CP(DSS_DATA18),		(IEN | PTU | EN  | M4)) \
+	MUX_VAL(CP(DSS_DATA15),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA16),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA17),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA18),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA19),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA20),		(IDIS | PTD | DIS | M0)) \
-	MUX_VAL(CP(DSS_DATA21),		(IDIS | PTD | DIS | M0))  \
+	MUX_VAL(CP(DSS_DATA21),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA22),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA23),		(IDIS | PTD | DIS | M0)) \
 	/* CAMERA */\
@@ -313,11 +313,11 @@  const omap3_sysinfo sysinfo = {
 	MUX_VAL(CP(RMII_TXEN),		(PTD | M0)) \
 	MUX_VAL(CP(RMII_50MHZ_CLK),	(IEN  | PTD | EN  | M0)) \
 	/* HECC */\
-	MUX_VAL(CP(HECC1_TXD),		(IEN  | PTD | EN  | M4)) \
-	MUX_VAL(CP(HECC1_RXD),		(IEN  | PTD | EN  | M4)) \
+	MUX_VAL(CP(HECC1_TXD),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(HECC1_RXD),		(IEN  | PTD | EN  | M0)) \
 	/* HSUSB */\
 	MUX_VAL(CP(HSUSB0_CLK),		(IEN  | PTD | DIS | M0)) \
-	MUX_VAL(CP(HSUSB0_STP),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(HSUSB0_STP),		(IEN  | PTU | DIS  | M0)) \
 	MUX_VAL(CP(HSUSB0_DIR),		(IEN  | PTD | DIS | M0)) \
 	MUX_VAL(CP(HSUSB0_NXT),		(IEN  | PTD | DIS | M0)) \
 	MUX_VAL(CP(HSUSB0_DATA0),	(IEN  | PTD | DIS | M0)) \
diff --git a/include/configs/mcx.h b/include/configs/mcx.h
index 359522a..d3061a2 100644
--- a/include/configs/mcx.h
+++ b/include/configs/mcx.h
@@ -256,22 +256,24 @@ 
 		"run nandargs; "					\
 		"ubi part nand0,4;"					\
 		"ubi readvol ${loadaddr} kernel;"			\
-		"run addip addtty addmtd addfb addeth addmisc;"		\
+		"run addtty addmtd addfb addeth addmisc;"		\
 		"bootm ${loadaddr}\0"					\
-	"swupdate_args=setenv bootargs ubi.mtd=6 root=ubi0:fs_recovery "\
-		"rootfstype=ubifs quiet loglevel=1 "			\
-			"consoleblank=0 ${swupdate_misc}\0"		\
+	"swupdate_args=setenv bootargs root=/dev/ram "			\
+		"quiet loglevel=1 "					\
+		"consoleblank=0 ${swupdate_misc}\0"			\
 	"swupdate=echo Running Sw-Update...;"				\
 		"if printenv mtdparts;then echo Starting SwUpdate...; "	\
 		"else mtdparts default;fi; "				\
 		"ubi part nand0,5;"					\
 		"ubi readvol 0x82000000 kernel_recovery;"		\
+		"ubi part nand0,6;"					\
+		"ubi readvol 0x84000000 fs_recovery;"			\
 		"run swupdate_args; "					\
 		"setenv bootargs ${bootargs} "				\
 			"${mtdparts} "					\
 			"vram=6M omapfb.vram=1:2M,2:2M,3:2M "		\
 			"omapdss.def_disp=lcd;"				\
-		"bootm ${loadaddr}\0"
+		"bootm 0x82000000 0x84000000\0"
 
 #define CONFIG_BOOTCOMMAND \
 	"run nandboot"