diff mbox

[U-Boot] video/powerpc: don't touch DIU registers that we don't need

Message ID 1347916362-26283-1-git-send-email-timur@freescale.com
State Accepted
Delegated to: Anatolij Gustschin
Headers show

Commit Message

Timur Tabi Sept. 17, 2012, 9:12 p.m. UTC 
Several DIU registers were being initialized either unnecessarily or to
wrong values.

1) All interrupts were enabled even though there's no interrupt handler.
   Interrupts were left enabled when booting Linux.

2) Don't configure a dummy area descriptor, since we don't support ADs
   in U-Boot.

3) Don't configure any write-back buffer registers, since we don't use
   that mode.

4) The default values for the THRESHOLDS, SYN_POL, and PLUT registers
   should be used, so don't touch those registers either.

Signed-off-by: Timur Tabi <timur@freescale.com>
---
 drivers/video/fsl_diu_fb.c |   21 ++-------------------
 1 files changed, 2 insertions(+), 19 deletions(-)

Comments

Anatolij Gustschin Sept. 21, 2012, 9:56 p.m. UTC | #1 
Hi Timur,

On Mon, 17 Sep 2012 16:12:42 -0500
Timur Tabi <timur@freescale.com> wrote:

> Several DIU registers were being initialized either unnecessarily or to
> wrong values.
> 
> 1) All interrupts were enabled even though there's no interrupt handler.
>    Interrupts were left enabled when booting Linux.
> 
> 2) Don't configure a dummy area descriptor, since we don't support ADs
>    in U-Boot.
> 
> 3) Don't configure any write-back buffer registers, since we don't use
>    that mode.
> 
> 4) The default values for the THRESHOLDS, SYN_POL, and PLUT registers
>    should be used, so don't touch those registers either.
> 
> Signed-off-by: Timur Tabi <timur@freescale.com>
> ---
>  drivers/video/fsl_diu_fb.c |   21 ++-------------------
>  1 files changed, 2 insertions(+), 19 deletions(-)

Applied to video/master. I'm sorry for long delay.

Thanks,
Anatolij
diff mbox

Patch

diff --git a/drivers/video/fsl_diu_fb.c b/drivers/video/fsl_diu_fb.c
index 648ffa3..a98cb67 100644
--- a/drivers/video/fsl_diu_fb.c
+++ b/drivers/video/fsl_diu_fb.c
@@ -271,7 +271,6 @@  int fsl_diu_init(u16 xres, u16 yres, u32 pixel_format, int gamma_fix)
 	struct diu *hw = (struct diu *)CONFIG_SYS_DIU_ADDR;
 	u8 *gamma_table_base;
 	unsigned int i, j;
-	struct diu_ad *dummy_ad;
 	struct diu_addr gamma;
 	struct diu_addr cursor;
 
@@ -302,14 +301,6 @@  int fsl_diu_init(u16 xres, u16 yres, u32 pixel_format, int gamma_fix)
 		return -1;
 	}
 
-	/* The AD struct for the dummy framebuffer and the FB itself */
-	dummy_ad = allocate_fb(2, 4, 4, NULL);
-	if (!dummy_ad) {
-		printf("DIU:   Out of memory\n");
-		return -1;
-	}
-	dummy_ad->pix_fmt = 0x88883316;
-
 	/* read mode info */
 	info.var.xres = fsl_diu_mode_db->xres;
 	info.var.yres = fsl_diu_mode_db->yres;
@@ -376,10 +367,7 @@  int fsl_diu_init(u16 xres, u16 yres, u32 pixel_format, int gamma_fix)
 	out_be32(&hw->gamma, gamma.paddr);
 	out_be32(&hw->cursor, cursor.paddr);
 	out_be32(&hw->bgnd, 0x007F7F7F);
-	out_be32(&hw->bgnd_wb, 0);
 	out_be32(&hw->disp_size, info.var.yres << 16 | info.var.xres);
-	out_be32(&hw->wb_size, 0);
-	out_be32(&hw->wb_mem_addr, 0);
 	out_be32(&hw->hsyn_para, info.var.left_margin << 22 |
 			info.var.hsync_len << 11 |
 			info.var.right_margin);
@@ -388,18 +376,13 @@  int fsl_diu_init(u16 xres, u16 yres, u32 pixel_format, int gamma_fix)
 			info.var.vsync_len << 11 |
 			info.var.lower_margin);
 
-	out_be32(&hw->syn_pol, 0);
-	out_be32(&hw->thresholds, 0x00037800);
-	out_be32(&hw->int_status, 0);
-	out_be32(&hw->int_mask, 0);
-	out_be32(&hw->plut, 0x01F5F666);
 	/* Pixel Clock configuration */
 	diu_set_pixel_clock(info.var.pixclock);
 
 	/* Set the frame buffers */
 	out_be32(&hw->desc[0], virt_to_phys(ad));
-	out_be32(&hw->desc[1], virt_to_phys(dummy_ad));
-	out_be32(&hw->desc[2], virt_to_phys(dummy_ad));
+	out_be32(&hw->desc[1], 0);
+	out_be32(&hw->desc[2], 0);
 
 	/* Enable the DIU, set display to all three planes */
 	out_be32(&hw->diu_mode, 1);