Message ID | 1335330687-19925-1-git-send-email-afleming@freescale.com |
---|---|
State | Accepted |
Delegated to: | Wolfgang Denk |
Headers | show |
Dear Andy Fleming, In message <1335330687-19925-1-git-send-email-afleming@freescale.com> you wrote: > > The following changes since commit 61ddce07f8b96c5df7d00466b4da9edaecb0eff1: > > sandbox: Use the new run_command() (2012-04-23 22:53:54 +0200) > > are available in the git repository at: > git://www.denx.de/git/u-boot-mpc85xx.git master > > Chunhe Lan (1): > powerpc/p1023rds: Disable nor flash node and enable nand flash node > > Jerry Huang (1): > PowerPC: correct the SATA for p1/p2 rdb-pc platform > > Liu Gang (8): > powerpc/srio: Rewrite the struct ccsr_rio > powerpc/corenet_ds: Correct the compilation errors about ENV > powerpc/corenet_ds: Document for the boot from SRIO > powerpc/corenet_ds: Master module for boot from SRIO > powerpc/corenet_ds: Slave module for boot from SRIO > powerpc/corenet_ds: Slave uploads ucode when boot from SRIO > powerpc/corenet_ds: Slave reads ENV from master when boot from SRIO > powerpc/corenet_ds: Slave core in holdoff when boot from SRIO > > Prabhakar Kushwaha (4): > powerpc/85xx:Avoid hardcoded vector address for IVORs > powerpc/85xx:Fix IVORs addr after vector table relocation > powerpc/85xx:Avoid vector table compilation for nand_spl > powerpc/85xx:Fix lds for nand boot debug info > > Shaohui Xie (2): > powerpc/p2041rdb: add NAND and NAND boot support > powerpc/p2041rdb: add env in NAND support > > Timur Tabi (3): > cmd_bdinfo: display the address map size (32-bit vs. 36-bit) > powerpc/85xx: don't display address map size (32-bit vs. 36-bit) during boot > powerpc/85xx: don't touch MAS7 on e500v1 when relocating CCSR > > York Sun (1): > powerpc/mpc8xxx: Fix CONFIG_DDR_RAW_TIMING for two boards > > README | 24 ++ > arch/powerpc/cpu/mpc85xx/cpu_init.c | 9 +- > arch/powerpc/cpu/mpc85xx/start.S | 112 ++++++--- > arch/powerpc/cpu/mpc85xx/u-boot-nand.lds | 4 +- > arch/powerpc/cpu/mpc8xxx/srio.c | 210 +++++++++++++++ > arch/powerpc/include/asm/config_mpc85xx.h | 46 ++++ > arch/powerpc/include/asm/fsl_srio.h | 64 +++++ > arch/powerpc/include/asm/immap_85xx.h | 387 ++++++++++++++++----------- > board/freescale/common/p_corenet/law.c | 13 + > board/freescale/common/p_corenet/tlb.c | 19 ++ > board/freescale/corenet_ds/corenet_ds.c | 4 - > board/freescale/mpc8536ds/mpc8536ds.c | 7 +- > board/freescale/mpc8572ds/mpc8572ds.c | 6 +- > board/freescale/mpc8641hpcn/mpc8641hpcn.c | 3 - > board/freescale/p1010rdb/ddr.c | 6 +- > board/freescale/p1010rdb/p1010rdb.c | 6 +- > board/freescale/p1022ds/p1022ds.c | 8 +- > board/freescale/p1023rds/p1023rds.c | 6 + > board/freescale/p1_p2_rdb/p1_p2_rdb.c | 4 +- > board/freescale/p1_p2_rdb_pc/ddr.c | 4 +- > board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c | 8 +- > board/freescale/p2020ds/p2020ds.c | 8 +- > board/freescale/p2041rdb/p2041rdb.c | 4 - > board/freescale/p3060qds/p3060qds.c | 3 - > boards.cfg | 7 + > common/Makefile | 1 + > common/cmd_bdinfo.c | 8 + > common/cmd_nvedit.c | 3 +- > common/env_remote.c | 79 ++++++ > doc/README.srio-boot-corenet | 103 +++++++ > drivers/net/fm/fm.c | 2 + > include/configs/P1010RDB.h | 2 +- > include/configs/P2041RDB.h | 59 ++++- > include/configs/corenet_ds.h | 75 +++++ > include/configs/p1_p2_rdb_pc.h | 4 +- > 35 files changed, 1047 insertions(+), 261 deletions(-) > create mode 100644 arch/powerpc/include/asm/fsl_srio.h > create mode 100644 common/env_remote.c > create mode 100644 doc/README.srio-boot-corenet Applied, thanks. Best regards, Wolfgang Denk