diff mbox

[U-Boot] ppc4xx: Improve lm63 pwm on dlvision-10g

Message ID 1317719635-2792-3-git-send-email-eibach@gdsys.de
State Accepted
Commit 97ca7b3b8e1d1637d95ed249aa233e669087d701
Delegated to: Stefan Roese
Headers show

Commit Message

Dirk Eibach Oct. 4, 2011, 9:13 a.m. UTC
From: Dirk Eibach <eibach@gdsys.de>

Fan PWM lookuptable was modified to start at 46 degrees
celsius instead of 40 degrees celsius.

Signed-off-by: Dirk Eibach <eibach@gdsys.de>
---
 include/configs/dlvision-10g.h |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)

Comments

Stefan Roese Oct. 12, 2011, 9:50 a.m. UTC | #1
On Tuesday 04 October 2011 11:13:53 eibach@gdsys.de wrote:
> From: Dirk Eibach <eibach@gdsys.de>
> 
> Fan PWM lookuptable was modified to start at 46 degrees
> celsius instead of 40 degrees celsius.

Applied to u-boot-ppc4xx/master. Thanks.

Best regards,
Stefan

--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office@denx.de
diff mbox

Patch

diff --git a/include/configs/dlvision-10g.h b/include/configs/dlvision-10g.h
index 4fc5262..1468197 100644
--- a/include/configs/dlvision-10g.h
+++ b/include/configs/dlvision-10g.h
@@ -34,7 +34,7 @@ 
  * Include common defines/options for all AMCC eval boards
  */
 #define CONFIG_HOSTNAME		dlvsion-10g
-#define CONFIG_IDENT_STRING	" dlvision-10g 0.01"
+#define CONFIG_IDENT_STRING	" dlvision-10g 0.02"
 #include "amcc-common.h"
 
 #define CONFIG_BOARD_EARLY_INIT_F	/* call board_early_init_f */
@@ -117,8 +117,8 @@ 
 #define CONFIG_DTT_LM63		1	/* National LM63	*/
 #define CONFIG_DTT_SENSORS	{ 0x4c, 0x4e }	/* Sensor addresses	*/
 #define CONFIG_DTT_PWM_LOOKUPTABLE	\
-		{ { 40, 10 }, { 43, 13 }, { 46, 16 },  \
-		  { 50, 20 }, { 53, 27 }, { 56, 34 }, { 60, 40 } }
+		{ { 46, 10 }, { 48, 14 }, { 50, 19 }, { 52, 23 },\
+		  { 54, 27 }, { 56, 31 }, { 58, 36 }, { 60, 40 } }
 #define CONFIG_DTT_TACH_LIMIT	0xa10
 
 /* EBC peripherals */