Message ID | 1309457195-8475-1-git-send-email-yorksun@freescale.com |
---|---|
State | Superseded |
Headers | show |
Dear York Sun, In message <1309457195-8475-1-git-send-email-yorksun@freescale.com> you wrote: > Move mac command to board/freescale/common/sys_eeprom.c. > Change the help message to be more helpful. Print argument format. > Fix MAX_NUM_PORTS to comply with v1 NXID format. > > Signed-off-by: York Sun <yorksun@freescale.com> Why are you turning a generic, board and architecture independent command into a FSL specific one? This makes no sense to me, NAK. > board/freescale/common/sys_eeprom.c | 29 ++++++++++++++++++++- > common/Makefile | 1 - > common/cmd_mac.c | 49 ----------------------------------- > 3 files changed, 28 insertions(+), 51 deletions(-) > delete mode 100644 common/cmd_mac.c In case you ever move / rename a file: please supply the options so git will detect the move / copy / rename. Best regards, Wolfgang Denk
Wolfgang, On Thu, 2011-07-28 at 15:35 +0200, Wolfgang Denk wrote: > Dear York Sun, > > In message <1309457195-8475-1-git-send-email-yorksun@freescale.com> you wrote: > > Move mac command to board/freescale/common/sys_eeprom.c. > > Change the help message to be more helpful. Print argument format. > > Fix MAX_NUM_PORTS to comply with v1 NXID format. > > > > Signed-off-by: York Sun <yorksun@freescale.com> > > Why are you turning a generic, board and architecture independent > command into a FSL specific one? > I believe this "generic" command is only for FSL boards. Moving it to right place. > This makes no sense to me, NAK. > > > board/freescale/common/sys_eeprom.c | 29 ++++++++++++++++++++- > > common/Makefile | 1 - > > common/cmd_mac.c | 49 ----------------------------------- > > 3 files changed, 28 insertions(+), 51 deletions(-) > > delete mode 100644 common/cmd_mac.c > > In case you ever move / rename a file: please supply the options so > git will detect the move / copy / rename. The meaningful code was moved into an existing file, so it wasn't renaming a file. York
Dear York Sun, In message <1311869371.29459.11.camel@oslab-l1> you wrote: > > > Why are you turning a generic, board and architecture independent > > command into a FSL specific one? > > I believe this "generic" command is only for FSL boards. Moving it to > right place. Even if it supports only FSL boards at the moemnt, the change should be in the opposite direction: move all the generic code out of the FSL directories and make it publicly available so others can use this tool as well. > > In case you ever move / rename a file: please supply the options so > > git will detect the move / copy / rename. > > The meaningful code was moved into an existing file, so it wasn't > renaming a file. That's what you think. Did you check what git says about it? So: still NAK. Please do it the other way round. Best regards, Wolfgang Denk
diff --git a/board/freescale/common/sys_eeprom.c b/board/freescale/common/sys_eeprom.c index d2ed036..b11899e 100644 --- a/board/freescale/common/sys_eeprom.c +++ b/board/freescale/common/sys_eeprom.c @@ -34,7 +34,7 @@ #endif #ifdef CONFIG_SYS_I2C_EEPROM_NXID -#define MAX_NUM_PORTS 23 +#define MAX_NUM_PORTS 31 #define NXID_VERSION 1 #endif @@ -552,3 +552,30 @@ unsigned int get_cpu_board_revision(void) return MPC85XX_CPU_BOARD_REV(be.major, be.minor); } #endif + +U_BOOT_CMD( + mac, 3, 1, do_mac, + "display and program the system ID and MAC addresses in EEPROM", + "without argument\n" + " - show content of system ID and MAC addresses\n" + "read\n" + " - read EEPROM without showing\n" + "mac save\n" + " - save to the EEPROM\n" + "mac id\n" + " - program system id (fixed)\n" + "mac num <string>\n" + " - program <string> as system serial number\n" + "mac errata <string>\n" + " - program <string> as errata data\n" + "mac date <YYMMDDhhmmss>\n" + " - program timestamp\n" + "mac ports <n>\n" + " - program the number of ports\n" + "mac <n> <XX:XX:XX:XX:XX:XX>\n" +#ifdef NXID_VERSION + " - program the MAC address for port n [n=0...22]" +#else + " - program the MAC address for port n [n=0...7]" +#endif +); diff --git a/common/Makefile b/common/Makefile index f81cff9..4a1514a 100644 --- a/common/Makefile +++ b/common/Makefile @@ -110,7 +110,6 @@ COBJS-$(CONFIG_CMD_LDRINFO) += cmd_ldrinfo.o COBJS-$(CONFIG_CMD_LICENSE) += cmd_license.o COBJS-y += cmd_load.o COBJS-$(CONFIG_LOGBUFFER) += cmd_log.o -COBJS-$(CONFIG_ID_EEPROM) += cmd_mac.o COBJS-$(CONFIG_CMD_MD5SUM) += cmd_md5sum.o COBJS-$(CONFIG_CMD_MEMORY) += cmd_mem.o COBJS-$(CONFIG_CMD_MFSL) += cmd_mfsl.o diff --git a/common/cmd_mac.c b/common/cmd_mac.c deleted file mode 100644 index 1884c2a..0000000 --- a/common/cmd_mac.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Copyright 2006 Freescale Semiconductor - * York Sun (yorksun@freescale.com) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <command.h> - -extern int do_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); - -U_BOOT_CMD( - mac, 3, 1, do_mac, - "display and program the system ID and MAC addresses in EEPROM", - "[read|save|id|num|errata|date|ports|0|1|2|3|4|5|6|7]\n" - "read\n" - " - show content of EEPROM\n" - "mac save\n" - " - save to the EEPROM\n" - "mac id\n" - " - program system id\n" - "mac num\n" - " - program system serial number\n" - "mac errata\n" - " - program errata data\n" - "mac date\n" - " - program date\n" - "mac ports\n" - " - program the number of ports\n" - "mac X\n" - " - program the MAC address for port X [X=0...7]" -);
Move mac command to board/freescale/common/sys_eeprom.c. Change the help message to be more helpful. Print argument format. Fix MAX_NUM_PORTS to comply with v1 NXID format. Signed-off-by: York Sun <yorksun@freescale.com> --- board/freescale/common/sys_eeprom.c | 29 ++++++++++++++++++++- common/Makefile | 1 - common/cmd_mac.c | 49 ----------------------------------- 3 files changed, 28 insertions(+), 51 deletions(-) delete mode 100644 common/cmd_mac.c