diff mbox

[U-Boot,V2,09/15] hammerhead: fix "#define XXXX 1"

Message ID 1303135967-19746-10-git-send-email-biessmann@corscience.de
State Accepted
Delegated to: Reinhard Meyer
Headers show

Commit Message

Andreas Bießmann April 18, 2011, 2:12 p.m. UTC 
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
---
No changes since V1

 include/configs/hammerhead.h |   48 +++++++++++++++++++++---------------------
 1 files changed, 24 insertions(+), 24 deletions(-)
diff mbox

Patch

diff --git a/include/configs/hammerhead.h b/include/configs/hammerhead.h
index 1f20fff..5a2d146 100644
--- a/include/configs/hammerhead.h
+++ b/include/configs/hammerhead.h
@@ -24,10 +24,10 @@ 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_AVR32			1
-#define CONFIG_AT32AP			1
-#define CONFIG_AT32AP7000		1
-#define CONFIG_HAMMERHEAD		1
+#define CONFIG_AVR32
+#define CONFIG_AT32AP
+#define CONFIG_AT32AP7000
+#define CONFIG_HAMMERHEAD
 
 #define CONFIG_SYS_HZ				1000
 
@@ -36,8 +36,8 @@ 
  * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency
  * and the PBA bus to run at 1/4 the PLL frequency.
  */
-#define CONFIG_PLL			1
-#define CONFIG_SYS_POWER_MANAGER		1
+#define CONFIG_PLL
+#define CONFIG_SYS_POWER_MANAGER
 #define CONFIG_SYS_OSC0_HZ			25000000
 #define CONFIG_SYS_PLL0_DIV			1
 #define CONFIG_SYS_PLL0_MUL			5
@@ -65,11 +65,11 @@ 
 #define CONFIG_HOSTNAME			hammerhead
 
 /* User serviceable stuff */
-#define CONFIG_DOS_PARTITION		1
+#define CONFIG_DOS_PARTITION
 
-#define CONFIG_CMDLINE_TAG		1
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_INITRD_TAG		1
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
 
 #define CONFIG_STACKSIZE		(2048)
 
@@ -84,8 +84,8 @@ 
  * data on the serial line may interrupt the boot sequence.
  */
 #define CONFIG_BOOTDELAY		1
-#define CONFIG_AUTOBOOT			1
-#define CONFIG_AUTOBOOT_KEYED		1
+#define CONFIG_AUTOBOOT
+#define CONFIG_AUTOBOOT_KEYED
 #define CONFIG_AUTOBOOT_PROMPT				\
 	"Press SPACE to abort autoboot in %d seconds\n", bootdelay
 #define CONFIG_AUTOBOOT_DELAY_STR	"d"
@@ -96,8 +96,8 @@ 
  * should be generated and assigned to the environment variables
  * "ethaddr". This is normally done during production.
  */
-#define CONFIG_OVERWRITE_ETHADDR_ONCE	1
-#define CONFIG_NET_MULTI		1
+#define CONFIG_OVERWRITE_ETHADDR_ONCE
+#define CONFIG_NET_MULTI
 
 /*
  * BOOTP/DHCP options
@@ -119,21 +119,21 @@ 
 #undef CONFIG_CMD_FPGA
 #undef CONFIG_CMD_SETGETDCR
 
-#define CONFIG_ATMEL_USART		1
-#define CONFIG_MACB			1
-#define CONFIG_PORTMUX_PIO		1
+#define CONFIG_ATMEL_USART
+#define CONFIG_MACB
+#define CONFIG_PORTMUX_PIO
 #define CONFIG_SYS_NR_PIOS			5
-#define CONFIG_SYS_HSDRAMC			1
-#define CONFIG_MMC			1
-#define CONFIG_ATMEL_MCI		1
+#define CONFIG_SYS_HSDRAMC
+#define CONFIG_MMC
+#define CONFIG_ATMEL_MCI
 
 #define CONFIG_SYS_DCACHE_LINESZ		32
 #define CONFIG_SYS_ICACHE_LINESZ		32
 
 #define CONFIG_NR_DRAM_BANKS		1
 
-#define CONFIG_SYS_FLASH_CFI			1
-#define CONFIG_FLASH_CFI_DRIVER		1
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
 
 #define CONFIG_SYS_FLASH_BASE			0x00000000
 #define CONFIG_SYS_FLASH_SIZE			0x800000
@@ -147,7 +147,7 @@ 
 
 #define CONFIG_SYS_SDRAM_BASE			0x10000000
 
-#define CONFIG_ENV_IS_IN_FLASH		1
+#define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_SIZE			65536
 #define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - CONFIG_ENV_SIZE)
 
@@ -166,7 +166,7 @@ 
 #define CONFIG_SYS_CBSIZE			256
 #define CONFIG_SYS_MAXARGS			16
 #define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP			1
+#define CONFIG_SYS_LONGHELP
 
 #define CONFIG_SYS_MEMTEST_START		CONFIG_SYS_SDRAM_BASE
 #define CONFIG_SYS_MEMTEST_END			(CONFIG_SYS_MEMTEST_START + 0x1f00000)