diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h
index 536f142..31b515e 100644
--- a/arch/powerpc/include/asm/config.h
+++ b/arch/powerpc/include/asm/config.h
@@ -80,6 +80,13 @@
 #endif
 #endif
 
+/* The TSEC driver uses the PHYLIB infrastructure */
+#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_FMAN_ENET)
+#define CONFIG_PHYLIB
+
+#include <config_phylib_all_drivers.h>
+#endif /* PHYLIB-supporting ethernets */
+
 /* All PPC boards must swap IDE bytes */
 #define CONFIG_IDE_SWAP_IO
 
diff --git a/arch/powerpc/include/asm/fsl_enet.h b/arch/powerpc/include/asm/fsl_enet.h
index 4fb2857..1f8f8e4 100644
--- a/arch/powerpc/include/asm/fsl_enet.h
+++ b/arch/powerpc/include/asm/fsl_enet.h
@@ -28,6 +28,16 @@ enum fsl_phy_enet_if {
 	FSL_ETH_IF_NONE,
 };
 
+struct tsec_mii_mng {
+	u32 miimcfg;		/* MII management configuration reg */
+	u32 miimcom;		/* MII management command reg */
+	u32 miimadd;		/* MII management address reg */
+	u32 miimcon;		/* MII management control reg */
+	u32 miimstat;		/* MII management status reg  */
+	u32 miimind;		/* MII management indication reg */
+	u32 ifstat;		/* Interface Status Register */
+} __attribute__ ((packed));
+
 int fdt_fixup_phy_connection(void *blob, int offset, enum fsl_phy_enet_if phyc);
 
 #endif /* __ASM_PPC_FSL_ENET_H */
diff --git a/board/freescale/mpc837xemds/mpc837xemds.c b/board/freescale/mpc837xemds/mpc837xemds.c
index 51dd692..ee1ebd9 100644
--- a/board/freescale/mpc837xemds/mpc837xemds.c
+++ b/board/freescale/mpc837xemds/mpc837xemds.c
@@ -21,6 +21,7 @@
 #include <libfdt.h>
 #include <fdt_support.h>
 #include <fsl_esdhc.h>
+#include <fsl_mdio.h>
 #include "pci.h"
 #include "../common/pq-mds-pib.h"
 
@@ -86,6 +87,7 @@ int board_mmc_init(bd_t *bd)
 #if defined(CONFIG_TSEC1) || defined(CONFIG_TSEC2)
 int board_eth_init(bd_t *bd)
 {
+	struct fsl_pq_mdio_info mdio_info;
 	struct tsec_info_struct tsec_info[2];
 	struct immap __iomem *im = (struct immap __iomem *)CONFIG_SYS_IMMR;
 	u32 rcwh = in_be32(&im->reset.rcwh);
@@ -131,6 +133,11 @@ int board_eth_init(bd_t *bd)
 	}
 	num++;
 #endif
+
+	mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+	mdio_info.name = DEFAULT_MII_NAME;
+	fsl_pq_mdio_init(bd, &mdio_info);
+
 	return tsec_eth_init(bd, tsec_info, num);
 }
 
diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c
index f83f629..b292e13 100644
--- a/board/freescale/mpc8536ds/mpc8536ds.c
+++ b/board/freescale/mpc8536ds/mpc8536ds.c
@@ -36,6 +36,7 @@
 #include <libfdt.h>
 #include <spd_sdram.h>
 #include <fdt_support.h>
+#include <fsl_mdio.h>
 #include <tsec.h>
 #include <netdev.h>
 #include <sata.h>
@@ -234,6 +235,7 @@ int board_early_init_r(void)
 int board_eth_init(bd_t *bis)
 {
 #ifdef CONFIG_TSEC_ENET
+	struct fsl_pq_mdio_info mdio_info;
 	struct tsec_info_struct tsec_info[2];
 	int num = 0;
 
@@ -268,6 +270,10 @@ int board_eth_init(bd_t *bis)
 	}
 #endif
 
+	mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+	mdio_info.name = DEFAULT_MII_NAME;
+	fsl_pq_mdio_init(bis, &mdio_info);
+
 	tsec_eth_init(bis, tsec_info, num);
 #endif
 	return pci_eth_init(bis);
diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c
index a48c815..6fe8d39 100644
--- a/board/freescale/mpc8544ds/mpc8544ds.c
+++ b/board/freescale/mpc8544ds/mpc8544ds.c
@@ -33,6 +33,7 @@
 #include <miiphy.h>
 #include <libfdt.h>
 #include <fdt_support.h>
+#include <fsl_mdio.h>
 #include <tsec.h>
 #include <netdev.h>
 
@@ -248,9 +249,35 @@ get_board_sys_clk(ulong dummy)
 	return val;
 }
 
+
+#define MIIM_CIS8204_SLED_CON		0x1b
+#define MIIM_CIS8204_SLEDCON_INIT	0x1115
+/*
+ * Hack to write all 4 PHYs with the LED values
+ */
+int board_phy_config(struct phy_device *phydev)
+{
+	static int do_once;
+	uint phyid;
+	struct mii_dev *bus = phydev->bus;
+
+	if (do_once)
+		return 0;
+
+	for (phyid = 0; phyid < 4; phyid++)
+		bus->write(bus, phyid, MDIO_DEVAD_NONE, MIIM_CIS8204_SLED_CON,
+				MIIM_CIS8204_SLEDCON_INIT);
+
+	do_once = 1;
+
+	return 0;
+}
+
+
 int board_eth_init(bd_t *bis)
 {
 #ifdef CONFIG_TSEC_ENET
+	struct fsl_pq_mdio_info mdio_info;
 	struct tsec_info_struct tsec_info[2];
 	int num = 0;
 
@@ -282,6 +309,9 @@ int board_eth_init(bd_t *bis)
 		fsl_sgmii_riser_init(tsec_info, num);
 	}
 
+	mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+	mdio_info.name = DEFAULT_MII_NAME;
+	fsl_pq_mdio_init(bis, &mdio_info);
 
 	tsec_eth_init(bis, tsec_info, num);
 #endif
diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c
index f444805..b20299e 100644
--- a/board/freescale/mpc8572ds/mpc8572ds.c
+++ b/board/freescale/mpc8572ds/mpc8572ds.c
@@ -35,6 +35,7 @@
 #include <libfdt.h>
 #include <fdt_support.h>
 #include <tsec.h>
+#include <fsl_mdio.h>
 #include <netdev.h>
 
 #include "../common/sgmii_riser.h"
@@ -187,6 +188,7 @@ int board_early_init_r(void)
 #ifdef CONFIG_TSEC_ENET
 int board_eth_init(bd_t *bis)
 {
+	struct fsl_pq_mdio_info mdio_info;
 	struct tsec_info_struct tsec_info[4];
 	int num = 0;
 
@@ -233,6 +235,10 @@ int board_eth_init(bd_t *bis)
 	fsl_sgmii_riser_init(tsec_info, num);
 #endif
 
+	mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+	mdio_info.name = DEFAULT_MII_NAME;
+	fsl_pq_mdio_init(bis, &mdio_info);
+
 	tsec_eth_init(bis, tsec_info, num);
 
 	return pci_eth_init(bis);
diff --git a/board/freescale/p1022ds/p1022ds.c b/board/freescale/p1022ds/p1022ds.c
index 6f20dc3..623610b 100644
--- a/board/freescale/p1022ds/p1022ds.c
+++ b/board/freescale/p1022ds/p1022ds.c
@@ -22,6 +22,7 @@
 #include <asm/io.h>
 #include <libfdt.h>
 #include <fdt_support.h>
+#include <fsl_mdio.h>
 #include <tsec.h>
 #include <asm/fsl_law.h>
 #include <netdev.h>
@@ -245,6 +246,7 @@ int board_early_init_r(void)
  */
 int board_eth_init(bd_t *bis)
 {
+	struct fsl_pq_mdio_info mdio_info;
 	struct tsec_info_struct tsec_info[2];
 	unsigned int num = 0;
 
@@ -257,6 +259,10 @@ int board_eth_init(bd_t *bis)
 	num++;
 #endif
 
+	mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+	mdio_info.name = DEFAULT_MII_NAME;
+	fsl_pq_mdio_init(bis, &mdio_info);
+
 	return tsec_eth_init(bis, tsec_info, num) + pci_eth_init(bis);
 }
 
diff --git a/board/freescale/p1_p2_rdb/p1_p2_rdb.c b/board/freescale/p1_p2_rdb/p1_p2_rdb.c
index 307c3e2..0b4ae9d 100644
--- a/board/freescale/p1_p2_rdb/p1_p2_rdb.c
+++ b/board/freescale/p1_p2_rdb/p1_p2_rdb.c
@@ -31,6 +31,7 @@
 #include <miiphy.h>
 #include <libfdt.h>
 #include <fdt_support.h>
+#include <fsl_mdio.h>
 #include <tsec.h>
 #include <vsc7385.h>
 #include <netdev.h>
@@ -179,6 +180,7 @@ int board_early_init_r(void)
 #ifdef CONFIG_TSEC_ENET
 int board_eth_init(bd_t *bis)
 {
+	struct fsl_pq_mdio_info mdio_info;
 	struct tsec_info_struct tsec_info[4];
 	int num = 0;
 	char *tmp;
@@ -216,6 +218,10 @@ int board_eth_init(bd_t *bis)
 		puts("No address specified for VSC7385 microcode.\n");
 #endif
 
+	mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+	mdio_info.name = DEFAULT_MII_NAME;
+	fsl_pq_mdio_init(bis, &mdio_info);
+
 	tsec_eth_init(bis, tsec_info, num);
 
 	return pci_eth_init(bis);
diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c
index 238b4d9..d3af6cf 100644
--- a/board/freescale/p2020ds/p2020ds.c
+++ b/board/freescale/p2020ds/p2020ds.c
@@ -34,6 +34,7 @@
 #include <miiphy.h>
 #include <libfdt.h>
 #include <fdt_support.h>
+#include <fsl_mdio.h>
 #include <tsec.h>
 #include <asm/fsl_law.h>
 #include <netdev.h>
@@ -201,6 +202,7 @@ int board_early_init_r(void)
 #ifdef CONFIG_TSEC_ENET
 int board_eth_init(bd_t *bis)
 {
+	struct fsl_pq_mdio_info mdio_info;
 	struct tsec_info_struct tsec_info[4];
 	int num = 0;
 
@@ -235,6 +237,11 @@ int board_eth_init(bd_t *bis)
 	fsl_sgmii_riser_init(tsec_info, num);
 #endif
 
+	mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+	mdio_info.name = DEFAULT_MII_NAME;
+
+	fsl_pq_mdio_init(bis, &mdio_info);
+
 	tsec_eth_init(bis, tsec_info, num);
 
 	return pci_eth_init(bis);
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index fd9d0b4..819b197 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -79,7 +79,7 @@ COBJS-$(CONFIG_TIGON3) += tigon3.o
 COBJS-$(CONFIG_TIGON3) += bcm570x_autoneg.o
 COBJS-$(CONFIG_TIGON3) += 5701rls.o
 COBJS-$(CONFIG_DRIVER_TI_EMAC) += davinci_emac.o
-COBJS-$(CONFIG_TSEC_ENET) += tsec.o
+COBJS-$(CONFIG_TSEC_ENET) += tsec.o fsl_mdio.o
 COBJS-$(CONFIG_TSI108_ETH) += tsi108_eth.o
 COBJS-$(CONFIG_ULI526X) += uli526x.o
 COBJS-$(CONFIG_VSC7385_ENET) += vsc7385.o
diff --git a/drivers/net/fsl_mdio.c b/drivers/net/fsl_mdio.c
new file mode 100644
index 0000000..1aab307
--- /dev/null
+++ b/drivers/net/fsl_mdio.c
@@ -0,0 +1,120 @@
+/*
+ * Copyright 2009-2010 Freescale Semiconductor, Inc.
+ *	Jun-jie Zhang <b18070@freescale.com>
+ *	Mingkai Hu <Mingkai.hu@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <miiphy.h>
+#include <phy.h>
+#include <fsl_mdio.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/fsl_enet.h>
+
+void tsec_local_mdio_write(struct tsec_mii_mng *phyregs, int port_addr,
+		int dev_addr, int regnum, int value)
+{
+	int timeout = 1000000;
+
+	out_be32(&phyregs->miimadd, (port_addr << 8) | (regnum & 0x1f));
+	out_be32(&phyregs->miimcon, value);
+	asm("sync");
+
+	while ((in_be32(&phyregs->miimind) & MIIMIND_BUSY) && timeout--)
+		;
+}
+
+int tsec_local_mdio_read(struct tsec_mii_mng *phyregs, int port_addr,
+		int dev_addr, int regnum)
+{
+	int value;
+	int timeout = 1000000;
+
+	/* Put the address of the phy, and the register
+	 * number into MIIMADD */
+	out_be32(&phyregs->miimadd, (port_addr << 8) | (regnum & 0x1f));
+
+	/* Clear the command register, and wait */
+	out_be32(&phyregs->miimcom, 0);
+	asm("sync");
+
+	/* Initiate a read command, and wait */
+	out_be32(&phyregs->miimcom, MIIMCOM_READ_CYCLE);
+	asm("sync");
+
+	/* Wait for the the indication that the read is done */
+	while ((in_be32(&phyregs->miimind) & (MIIMIND_NOTVALID | MIIMIND_BUSY))
+			&& timeout--)
+		;
+
+	/* Grab the value read from the PHY */
+	value = in_be32(&phyregs->miimstat);
+
+	return value;
+}
+
+static int fsl_pq_mdio_reset(struct mii_dev *bus)
+{
+	struct tsec_mii_mng *regs = bus->priv;
+
+	/* Reset MII (due to new addresses) */
+	out_be32(&regs->miimcfg, MIIMCFG_RESET_MGMT);
+
+	out_be32(&regs->miimcfg, MIIMCFG_INIT_VALUE);
+
+	while (in_be32(&regs->miimind) & MIIMIND_BUSY)
+		;
+
+	return 0;
+}
+
+int tsec_phy_read(struct mii_dev *bus, int addr, int dev_addr, int regnum)
+{
+	struct tsec_mii_mng *phyregs = bus->priv;
+
+	return tsec_local_mdio_read(phyregs, addr, dev_addr, regnum);
+}
+
+int tsec_phy_write(struct mii_dev *bus, int addr, int dev_addr, int regnum,
+			u16 value)
+{
+	struct tsec_mii_mng *phyregs = bus->priv;
+
+	tsec_local_mdio_write(phyregs, addr, dev_addr, regnum, value);
+
+	return 0;
+}
+
+int fsl_pq_mdio_init(bd_t *bis, struct fsl_pq_mdio_info *info)
+{
+	struct mii_dev *bus = mdio_alloc();
+
+	if (!bus) {
+		printf("Failed to allocate FSL MDIO bus\n");
+		return -1;
+	}
+
+	bus->read = tsec_phy_read;
+	bus->write = tsec_phy_write;
+	bus->reset = fsl_pq_mdio_reset;
+	sprintf(bus->name, info->name);
+
+	bus->priv = info->regs;
+
+	return mdio_register(bus);
+}
diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c
index a3857b3..06e5834 100644
--- a/drivers/net/tsec.c
+++ b/drivers/net/tsec.c
@@ -17,10 +17,9 @@
 #include <net.h>
 #include <command.h>
 #include <tsec.h>
+#include <fsl_mdio.h>
 #include <asm/errno.h>
 
-#include "miiphy.h"
-
 DECLARE_GLOBAL_DATA_PTR;
 
 #define TX_BUF_CNT		2
@@ -56,10 +55,10 @@ static struct tsec_info_struct tsec_info[] = {
 #ifdef CONFIG_MPC85XX_FEC
 	{
 		.regs = (tsec_t *)(TSEC_BASE_ADDR + 0x2000),
-		.miiregs = (tsec_mdio_t *)(MDIO_BASE_ADDR),
 		.devname = CONFIG_MPC85XX_FEC_NAME,
 		.phyaddr = FEC_PHY_ADDR,
-		.flags = FEC_FLAGS
+		.flags = FEC_FLAGS,
+		.mii_devname = DEFAULT_MII_NAME
 	},			/* FEC */
 #endif
 #ifdef CONFIG_TSEC3
@@ -70,58 +69,6 @@ static struct tsec_info_struct tsec_info[] = {
 #endif
 };
 
-/* Writes the given phy's reg with value, using the specified MDIO regs */
-static void tsec_local_mdio_write(tsec_mdio_t *phyregs, uint addr,
-		uint reg, uint value)
-{
-	int timeout = 1000000;
-
-	out_be32(&phyregs->miimadd, (addr << 8) | reg);
-	out_be32(&phyregs->miimcon, value);
-
-	timeout = 1000000;
-	while ((in_be32(&phyregs->miimind) & MIIMIND_BUSY) && timeout--)
-		;
-}
-
-/* Provide the default behavior of writing the PHY of this ethernet device */
-#define write_phy_reg(priv, regnum, value) \
-	tsec_local_mdio_write(priv->phyregs,priv->phyaddr,regnum,value)
-
-/* Reads register regnum on the device's PHY through the
- * specified registers.	 It lowers and raises the read
- * command, and waits for the data to become valid (miimind
- * notvalid bit cleared), and the bus to cease activity (miimind
- * busy bit cleared), and then returns the value
- */
-static uint tsec_local_mdio_read(tsec_mdio_t *phyregs, uint phyid, uint regnum)
-{
-	uint value;
-
-	/* Put the address of the phy, and the register
-	 * number into MIIMADD */
-	out_be32(&phyregs->miimadd, (phyid << 8) | regnum);
-
-	/* Clear the command register, and wait */
-	out_be32(&phyregs->miimcom, 0);
-
-	/* Initiate a read command, and wait */
-	out_be32(&phyregs->miimcom, MIIM_READ_COMMAND);
-
-	/* Wait for the the indication that the read is done */
-	while ((in_be32(&phyregs->miimind) & (MIIMIND_NOTVALID | MIIMIND_BUSY)))
-		;
-
-	/* Grab the value read from the PHY */
-	value = in_be32(&phyregs->miimstat);
-
-	return value;
-}
-
-/* #define to provide old read_phy_reg functionality without duplicating code */
-#define read_phy_reg(priv,regnum) \
-	tsec_local_mdio_read(priv->phyregs,priv->phyaddr,regnum)
-
 #define TBIANA_SETTINGS ( \
 		TBIANA_ASYMMETRIC_PAUSE \
 		| TBIANA_SYMMETRIC_PAUSE \
@@ -143,1407 +90,14 @@ static void tsec_configure_serdes(struct tsec_private *priv)
 {
 	/* Access TBI PHY registers at given TSEC register offset as opposed
 	 * to the register offset used for external PHY accesses */
-	tsec_local_mdio_write(priv->phyregs_sgmii, priv->regs->tbipa, TBI_ANA,
-			TBIANA_SETTINGS);
-	tsec_local_mdio_write(priv->phyregs_sgmii, priv->regs->tbipa, TBI_TBICON,
-			TBICON_CLK_SELECT);
-	tsec_local_mdio_write(priv->phyregs_sgmii, priv->regs->tbipa, TBI_CR,
-			CONFIG_TSEC_TBICR_SETTINGS);
-}
-
-/*
- * Returns which value to write to the control register.
- * For 10/100, the value is slightly different
- */
-static uint mii_cr_init(uint mii_reg, struct tsec_private * priv)
-{
-	if (priv->flags & TSEC_GIGABIT)
-		return MIIM_CONTROL_INIT;
-	else
-		return MIIM_CR_INIT;
+	tsec_local_mdio_write(priv->phyregs_sgmii, in_be32(&priv->regs->tbipa),
+			0, TBI_ANA, TBIANA_SETTINGS);
+	tsec_local_mdio_write(priv->phyregs_sgmii, in_be32(&priv->regs->tbipa),
+			0, TBI_TBICON, TBICON_CLK_SELECT);
+	tsec_local_mdio_write(priv->phyregs_sgmii, in_be32(&priv->regs->tbipa),
+			0, TBI_CR, CONFIG_TSEC_TBICR_SETTINGS);
 }
 
-/*
- * Wait for auto-negotiation to complete, then determine link
- */
-static uint mii_parse_sr(uint mii_reg, struct tsec_private * priv)
-{
-	/*
-	 * Wait if the link is up, and autonegotiation is in progress
-	 * (ie - we're capable and it's not done)
-	 */
-	mii_reg = read_phy_reg(priv, MIIM_STATUS);
-	if ((mii_reg & BMSR_ANEGCAPABLE) && !(mii_reg & BMSR_ANEGCOMPLETE)) {
-		int i = 0;
-
-		puts("Waiting for PHY auto negotiation to complete");
-		while (!(mii_reg & BMSR_ANEGCOMPLETE)) {
-			/*
-			 * Timeout reached ?
-			 */
-			if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
-				puts(" TIMEOUT !\n");
-				priv->link = 0;
-				return 0;
-			}
-
-			if (ctrlc()) {
-				puts("user interrupt!\n");
-				priv->link = 0;
-				return -EINTR;
-			}
-
-			if ((i++ % 1000) == 0) {
-				putc('.');
-			}
-			udelay(1000);	/* 1 ms */
-			mii_reg = read_phy_reg(priv, MIIM_STATUS);
-		}
-		puts(" done\n");
-
-		/* Link status bit is latched low, read it again */
-		mii_reg = read_phy_reg(priv, MIIM_STATUS);
-
-		udelay(500000);	/* another 500 ms (results in faster booting) */
-	}
-
-	priv->link = mii_reg & MIIM_STATUS_LINK ? 1 : 0;
-
-	return 0;
-}
-
-/* Generic function which updates the speed and duplex.  If
- * autonegotiation is enabled, it uses the AND of the link
- * partner's advertised capabilities and our advertised
- * capabilities.  If autonegotiation is disabled, we use the
- * appropriate bits in the control register.
- *
- * Stolen from Linux's mii.c and phy_device.c
- */
-static uint mii_parse_link(uint mii_reg, struct tsec_private *priv)
-{
-	/* We're using autonegotiation */
-	if (mii_reg & BMSR_ANEGCAPABLE) {
-		uint lpa = 0;
-		uint gblpa = 0;
-
-		/* Check for gigabit capability */
-		if (mii_reg & BMSR_ERCAP) {
-			/* We want a list of states supported by
-			 * both PHYs in the link
-			 */
-			gblpa = read_phy_reg(priv, MII_STAT1000);
-			gblpa &= read_phy_reg(priv, MII_CTRL1000) << 2;
-		}
-
-		/* Set the baseline so we only have to set them
-		 * if they're different
-		 */
-		priv->speed = 10;
-		priv->duplexity = 0;
-
-		/* Check the gigabit fields */
-		if (gblpa & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) {
-			priv->speed = 1000;
-
-			if (gblpa & PHY_1000BTSR_1000FD)
-				priv->duplexity = 1;
-
-			/* We're done! */
-			return 0;
-		}
-
-		lpa = read_phy_reg(priv, MII_ADVERTISE);
-		lpa &= read_phy_reg(priv, MII_LPA);
-
-		if (lpa & (LPA_100FULL | LPA_100HALF)) {
-			priv->speed = 100;
-
-			if (lpa & LPA_100FULL)
-				priv->duplexity = 1;
-
-		} else if (lpa & LPA_10FULL)
-			priv->duplexity = 1;
-	} else {
-		uint bmcr = read_phy_reg(priv, MII_BMCR);
-
-		priv->speed = 10;
-		priv->duplexity = 0;
-
-		if (bmcr & BMCR_FULLDPLX)
-			priv->duplexity = 1;
-
-		if (bmcr & BMCR_SPEED1000)
-			priv->speed = 1000;
-		else if (bmcr & BMCR_SPEED100)
-			priv->speed = 100;
-	}
-
-	return 0;
-}
-
-/*
- * "Ethernet@Wirespeed" needs to be enabled to achieve link in certain
- * circumstances.  eg a gigabit TSEC connected to a gigabit switch with
- * a 4-wire ethernet cable.  Both ends advertise gigabit, but can't
- * link.  "Ethernet@Wirespeed" reduces advertised speed until link
- * can be achieved.
- */
-static uint mii_BCM54xx_wirespeed(uint mii_reg, struct tsec_private *priv)
-{
-	return (read_phy_reg(priv, mii_reg) & 0x8FFF) | 0x8010;
-}
-
-/*
- * Parse the BCM54xx status register for speed and duplex information.
- * The linux sungem_phy has this information, but in a table format.
- */
-static uint mii_parse_BCM54xx_sr(uint mii_reg, struct tsec_private *priv)
-{
-	/* If there is no link, speed and duplex don't matter */
-	if (!priv->link)
-		return 0;
-
-	switch ((mii_reg & MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK) >>
-		MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT) {
-	case 1:
-		priv->duplexity = 0;
-		priv->speed = 10;
-		break;
-	case 2:
-		priv->duplexity = 1;
-		priv->speed = 10;
-		break;
-	case 3:
-		priv->duplexity = 0;
-		priv->speed = 100;
-		break;
-	case 5:
-		priv->duplexity = 1;
-		priv->speed = 100;
-		break;
-	case 6:
-		priv->duplexity = 0;
-		priv->speed = 1000;
-		break;
-	case 7:
-		priv->duplexity = 1;
-		priv->speed = 1000;
-		break;
-	default:
-		printf("Auto-neg error, defaulting to 10BT/HD\n");
-		priv->duplexity = 0;
-		priv->speed = 10;
-		break;
-	}
-
-	return 0;
-}
-
-/*
- * Find out if PHY is in copper or serdes mode by looking at Expansion Reg
- * 0x42 - "Operating Mode Status Register"
- */
-static int BCM8482_is_serdes(struct tsec_private *priv)
-{
-	u16 val;
-	int serdes = 0;
-
-	write_phy_reg(priv, MIIM_BCM54XX_EXP_SEL, MIIM_BCM54XX_EXP_SEL_ER | 0x42);
-	val = read_phy_reg(priv, MIIM_BCM54XX_EXP_DATA);
-
-	switch (val & 0x1f) {
-	case 0x0d:	/* RGMII-to-100Base-FX */
-	case 0x0e:	/* RGMII-to-SGMII */
-	case 0x0f:	/* RGMII-to-SerDes */
-	case 0x12:	/* SGMII-to-SerDes */
-	case 0x13:	/* SGMII-to-100Base-FX */
-	case 0x16:	/* SerDes-to-Serdes */
-		serdes = 1;
-		break;
-	case 0x6:	/* RGMII-to-Copper */
-	case 0x14:	/* SGMII-to-Copper */
-	case 0x17:	/* SerDes-to-Copper */
-		break;
-	default:
-		printf("ERROR, invalid PHY mode (0x%x\n)", val);
-		break;
-	}
-
-	return serdes;
-}
-
-/*
- * Determine SerDes link speed and duplex from Expansion reg 0x42 "Operating
- * Mode Status Register"
- */
-uint mii_parse_BCM5482_serdes_sr(struct tsec_private *priv)
-{
-	u16 val;
-	int i = 0;
-
-	/* Wait 1s for link - Clause 37 autonegotiation happens very fast */
-	while (1) {
-		write_phy_reg(priv, MIIM_BCM54XX_EXP_SEL,
-				MIIM_BCM54XX_EXP_SEL_ER | 0x42);
-		val = read_phy_reg(priv, MIIM_BCM54XX_EXP_DATA);
-
-		if (val & 0x8000)
-			break;
-
-		if (i++ > 1000) {
-			priv->link = 0;
-			return 1;
-		}
-
-		udelay(1000);	/* 1 ms */
-	}
-
-	priv->link = 1;
-	switch ((val >> 13) & 0x3) {
-	case (0x00):
-		priv->speed = 10;
-		break;
-	case (0x01):
-		priv->speed = 100;
-		break;
-	case (0x02):
-		priv->speed = 1000;
-		break;
-	}
-
-	priv->duplexity = (val & 0x1000) == 0x1000;
-
-	return 0;
-}
-
-/*
- * Figure out if BCM5482 is in serdes or copper mode and determine link
- * configuration accordingly
- */
-static uint mii_parse_BCM5482_sr(uint mii_reg, struct tsec_private *priv)
-{
-	if (BCM8482_is_serdes(priv)) {
-		mii_parse_BCM5482_serdes_sr(priv);
-		priv->flags |= TSEC_FIBER;
-	} else {
-		/* Wait for auto-negotiation to complete or fail */
-		mii_parse_sr(mii_reg, priv);
-
-		/* Parse BCM54xx copper aux status register */
-		mii_reg = read_phy_reg(priv, MIIM_BCM54xx_AUXSTATUS);
-		mii_parse_BCM54xx_sr(mii_reg, priv);
-	}
-
-	return 0;
-}
-
-/* Parse the 88E1011's status register for speed and duplex
- * information
- */
-static uint mii_parse_88E1011_psr(uint mii_reg, struct tsec_private * priv)
-{
-	uint speed;
-
-	mii_reg = read_phy_reg(priv, MIIM_88E1011_PHY_STATUS);
-
-	if ((mii_reg & MIIM_88E1011_PHYSTAT_LINK) &&
-		!(mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE)) {
-		int i = 0;
-
-		puts("Waiting for PHY realtime link");
-		while (!(mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE)) {
-			/* Timeout reached ? */
-			if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
-				puts(" TIMEOUT !\n");
-				priv->link = 0;
-				break;
-			}
-
-			if ((i++ % 1000) == 0) {
-				putc('.');
-			}
-			udelay(1000);	/* 1 ms */
-			mii_reg = read_phy_reg(priv, MIIM_88E1011_PHY_STATUS);
-		}
-		puts(" done\n");
-		udelay(500000);	/* another 500 ms (results in faster booting) */
-	} else {
-		if (mii_reg & MIIM_88E1011_PHYSTAT_LINK)
-			priv->link = 1;
-		else
-			priv->link = 0;
-	}
-
-	if (mii_reg & MIIM_88E1011_PHYSTAT_DUPLEX)
-		priv->duplexity = 1;
-	else
-		priv->duplexity = 0;
-
-	speed = (mii_reg & MIIM_88E1011_PHYSTAT_SPEED);
-
-	switch (speed) {
-	case MIIM_88E1011_PHYSTAT_GBIT:
-		priv->speed = 1000;
-		break;
-	case MIIM_88E1011_PHYSTAT_100:
-		priv->speed = 100;
-		break;
-	default:
-		priv->speed = 10;
-	}
-
-	return 0;
-}
-
-/* Parse the RTL8211B's status register for speed and duplex
- * information
- */
-static uint mii_parse_RTL8211B_sr(uint mii_reg, struct tsec_private * priv)
-{
-	uint speed;
-
-	mii_reg = read_phy_reg(priv, MIIM_RTL8211B_PHY_STATUS);
-	if (!(mii_reg & MIIM_RTL8211B_PHYSTAT_SPDDONE)) {
-		int i = 0;
-
-		/* in case of timeout ->link is cleared */
-		priv->link = 1;
-		puts("Waiting for PHY realtime link");
-		while (!(mii_reg & MIIM_RTL8211B_PHYSTAT_SPDDONE)) {
-			/* Timeout reached ? */
-			if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
-				puts(" TIMEOUT !\n");
-				priv->link = 0;
-				break;
-			}
-
-			if ((i++ % 1000) == 0) {
-				putc('.');
-			}
-			udelay(1000);	/* 1 ms */
-			mii_reg = read_phy_reg(priv, MIIM_RTL8211B_PHY_STATUS);
-		}
-		puts(" done\n");
-		udelay(500000);	/* another 500 ms (results in faster booting) */
-	} else {
-		if (mii_reg & MIIM_RTL8211B_PHYSTAT_LINK)
-			priv->link = 1;
-		else
-			priv->link = 0;
-	}
-
-	if (mii_reg & MIIM_RTL8211B_PHYSTAT_DUPLEX)
-		priv->duplexity = 1;
-	else
-		priv->duplexity = 0;
-
-	speed = (mii_reg & MIIM_RTL8211B_PHYSTAT_SPEED);
-
-	switch (speed) {
-	case MIIM_RTL8211B_PHYSTAT_GBIT:
-		priv->speed = 1000;
-		break;
-	case MIIM_RTL8211B_PHYSTAT_100:
-		priv->speed = 100;
-		break;
-	default:
-		priv->speed = 10;
-	}
-
-	return 0;
-}
-
-/* Parse the cis8201's status register for speed and duplex
- * information
- */
-static uint mii_parse_cis8201(uint mii_reg, struct tsec_private * priv)
-{
-	uint speed;
-
-	if (mii_reg & MIIM_CIS8201_AUXCONSTAT_DUPLEX)
-		priv->duplexity = 1;
-	else
-		priv->duplexity = 0;
-
-	speed = mii_reg & MIIM_CIS8201_AUXCONSTAT_SPEED;
-	switch (speed) {
-	case MIIM_CIS8201_AUXCONSTAT_GBIT:
-		priv->speed = 1000;
-		break;
-	case MIIM_CIS8201_AUXCONSTAT_100:
-		priv->speed = 100;
-		break;
-	default:
-		priv->speed = 10;
-		break;
-	}
-
-	return 0;
-}
-
-/* Parse the vsc8244's status register for speed and duplex
- * information
- */
-static uint mii_parse_vsc8244(uint mii_reg, struct tsec_private * priv)
-{
-	uint speed;
-
-	if (mii_reg & MIIM_VSC8244_AUXCONSTAT_DUPLEX)
-		priv->duplexity = 1;
-	else
-		priv->duplexity = 0;
-
-	speed = mii_reg & MIIM_VSC8244_AUXCONSTAT_SPEED;
-	switch (speed) {
-	case MIIM_VSC8244_AUXCONSTAT_GBIT:
-		priv->speed = 1000;
-		break;
-	case MIIM_VSC8244_AUXCONSTAT_100:
-		priv->speed = 100;
-		break;
-	default:
-		priv->speed = 10;
-		break;
-	}
-
-	return 0;
-}
-
-/* Parse the DM9161's status register for speed and duplex
- * information
- */
-static uint mii_parse_dm9161_scsr(uint mii_reg, struct tsec_private * priv)
-{
-	if (mii_reg & (MIIM_DM9161_SCSR_100F | MIIM_DM9161_SCSR_100H))
-		priv->speed = 100;
-	else
-		priv->speed = 10;
-
-	if (mii_reg & (MIIM_DM9161_SCSR_100F | MIIM_DM9161_SCSR_10F))
-		priv->duplexity = 1;
-	else
-		priv->duplexity = 0;
-
-	return 0;
-}
-
-/*
- * Hack to write all 4 PHYs with the LED values
- */
-static uint mii_cis8204_fixled(uint mii_reg, struct tsec_private * priv)
-{
-	uint phyid;
-	tsec_mdio_t *regbase = priv->phyregs;
-	int timeout = 1000000;
-
-	for (phyid = 0; phyid < 4; phyid++) {
-		out_be32(&regbase->miimadd, (phyid << 8) | mii_reg);
-		out_be32(&regbase->miimcon, MIIM_CIS8204_SLEDCON_INIT);
-
-		timeout = 1000000;
-		while ((in_be32(&regbase->miimind) & MIIMIND_BUSY) && timeout--)
-			;
-	}
-
-	return MIIM_CIS8204_SLEDCON_INIT;
-}
-
-static uint mii_cis8204_setmode(uint mii_reg, struct tsec_private * priv)
-{
-	if (priv->flags & TSEC_REDUCED)
-		return MIIM_CIS8204_EPHYCON_INIT | MIIM_CIS8204_EPHYCON_RGMII;
-	else
-		return MIIM_CIS8204_EPHYCON_INIT;
-}
-
-static uint mii_m88e1111s_setmode(uint mii_reg, struct tsec_private *priv)
-{
-	uint mii_data = read_phy_reg(priv, mii_reg);
-
-	if (priv->flags & TSEC_REDUCED)
-		mii_data = (mii_data & 0xfff0) | 0x000b;
-	return mii_data;
-}
-
-static struct phy_info phy_info_M88E1149S = {
-	0x1410ca,
-	"Marvell 88E1149S",
-	4,
-	(struct phy_cmd[]) {     /* config */
-		/* Reset and configure the PHY */
-		{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
-		{0x1d, 0x1f, NULL},
-		{0x1e, 0x200c, NULL},
-		{0x1d, 0x5, NULL},
-		{0x1e, 0x0, NULL},
-		{0x1e, 0x100, NULL},
-		{MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
-		{MIIM_ANAR, MIIM_ANAR_INIT, NULL},
-		{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
-		{MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) {     /* startup */
-		/* Status is read once to clear old link state */
-		{MIIM_STATUS, miim_read, NULL},
-		/* Auto-negotiate */
-		{MIIM_STATUS, miim_read, &mii_parse_sr},
-		/* Read the status */
-		{MIIM_88E1011_PHY_STATUS, miim_read, &mii_parse_88E1011_psr},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) {     /* shutdown */
-		{miim_end,}
-	},
-};
-
-/* The 5411 id is 0x206070, the 5421 is 0x2060e0 */
-static struct phy_info phy_info_BCM5461S = {
-	0x02060c1,	/* 5461 ID */
-	"Broadcom BCM5461S",
-	0, /* not clear to me what minor revisions we can shift away */
-	(struct phy_cmd[]) { /* config */
-		/* Reset and configure the PHY */
-		{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
-		{MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
-		{MIIM_ANAR, MIIM_ANAR_INIT, NULL},
-		{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
-		{MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) { /* startup */
-		/* Status is read once to clear old link state */
-		{MIIM_STATUS, miim_read, NULL},
-		/* Auto-negotiate */
-		{MIIM_STATUS, miim_read, &mii_parse_sr},
-		/* Read the status */
-		{MIIM_BCM54xx_AUXSTATUS, miim_read, &mii_parse_BCM54xx_sr},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) { /* shutdown */
-		{miim_end,}
-	},
-};
-
-static struct phy_info phy_info_BCM5464S = {
-	0x02060b1,	/* 5464 ID */
-	"Broadcom BCM5464S",
-	0, /* not clear to me what minor revisions we can shift away */
-	(struct phy_cmd[]) { /* config */
-		/* Reset and configure the PHY */
-		{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
-		{MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
-		{MIIM_ANAR, MIIM_ANAR_INIT, NULL},
-		{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
-		{MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) { /* startup */
-		/* Status is read once to clear old link state */
-		{MIIM_STATUS, miim_read, NULL},
-		/* Auto-negotiate */
-		{MIIM_STATUS, miim_read, &mii_parse_sr},
-		/* Read the status */
-		{MIIM_BCM54xx_AUXSTATUS, miim_read, &mii_parse_BCM54xx_sr},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) { /* shutdown */
-		{miim_end,}
-	},
-};
-
-static struct phy_info phy_info_BCM5482S =  {
-	0x0143bcb,
-	"Broadcom BCM5482S",
-	4,
-	(struct phy_cmd[]) { /* config */
-		/* Reset and configure the PHY */
-		{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
-		/* Setup read from auxilary control shadow register 7 */
-		{MIIM_BCM54xx_AUXCNTL, MIIM_BCM54xx_AUXCNTL_ENCODE(7), NULL},
-		/* Read Misc Control register and or in Ethernet@Wirespeed */
-		{MIIM_BCM54xx_AUXCNTL, 0, &mii_BCM54xx_wirespeed},
-		{MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
-		/* Initial config/enable of secondary SerDes interface */
-		{MIIM_BCM54XX_SHD, MIIM_BCM54XX_SHD_WR_ENCODE(0x14, 0xf), NULL},
-		/* Write intial value to secondary SerDes Contol */
-		{MIIM_BCM54XX_EXP_SEL, MIIM_BCM54XX_EXP_SEL_SSD | 0, NULL},
-		{MIIM_BCM54XX_EXP_DATA, MIIM_CONTROL_RESTART, NULL},
-		/* Enable copper/fiber auto-detect */
-		{MIIM_BCM54XX_SHD, MIIM_BCM54XX_SHD_WR_ENCODE(0x1e, 0x201)},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) { /* startup */
-		/* Status is read once to clear old link state */
-		{MIIM_STATUS, miim_read, NULL},
-		/* Determine copper/fiber, auto-negotiate, and read the result */
-		{MIIM_STATUS, miim_read, &mii_parse_BCM5482_sr},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) { /* shutdown */
-		{miim_end,}
-	},
-};
-
-static struct phy_info phy_info_M88E1011S = {
-	0x01410c6,
-	"Marvell 88E1011S",
-	4,
-	(struct phy_cmd[]) {	/* config */
-		/* Reset and configure the PHY */
-		{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
-		{0x1d, 0x1f, NULL},
-		{0x1e, 0x200c, NULL},
-		{0x1d, 0x5, NULL},
-		{0x1e, 0x0, NULL},
-		{0x1e, 0x100, NULL},
-		{MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
-		{MIIM_ANAR, MIIM_ANAR_INIT, NULL},
-		{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
-		{MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) {	/* startup */
-		/* Status is read once to clear old link state */
-		{MIIM_STATUS, miim_read, NULL},
-		/* Auto-negotiate */
-		{MIIM_STATUS, miim_read, &mii_parse_sr},
-		/* Read the status */
-		{MIIM_88E1011_PHY_STATUS, miim_read, &mii_parse_88E1011_psr},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) {	/* shutdown */
-		{miim_end,}
-	},
-};
-
-static struct phy_info phy_info_M88E1111S = {
-	0x01410cc,
-	"Marvell 88E1111S",
-	4,
-	(struct phy_cmd[]) {	/* config */
-		/* Reset and configure the PHY */
-		{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
-		{0x1b, 0x848f, &mii_m88e1111s_setmode},
-		{0x14, 0x0cd2, NULL}, /* Delay RGMII TX and RX */
-		{MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
-		{MIIM_ANAR, MIIM_ANAR_INIT, NULL},
-		{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
-		{MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) {	/* startup */
-		/* Status is read once to clear old link state */
-		{MIIM_STATUS, miim_read, NULL},
-		/* Auto-negotiate */
-		{MIIM_STATUS, miim_read, &mii_parse_sr},
-		/* Read the status */
-		{MIIM_88E1011_PHY_STATUS, miim_read, &mii_parse_88E1011_psr},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) {	/* shutdown */
-		{miim_end,}
-	},
-};
-
-static struct phy_info phy_info_M88E1118 = {
-	0x01410e1,
-	"Marvell 88E1118",
-	4,
-	(struct phy_cmd[]) {	/* config */
-		/* Reset and configure the PHY */
-		{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
-		{0x16, 0x0002, NULL}, /* Change Page Number */
-		{0x15, 0x1070, NULL}, /* Delay RGMII TX and RX */
-		{0x16, 0x0003, NULL}, /* Change Page Number */
-		{0x10, 0x021e, NULL}, /* Adjust LED control */
-		{0x16, 0x0000, NULL}, /* Change Page Number */
-		{MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
-		{MIIM_ANAR, MIIM_ANAR_INIT, NULL},
-		{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
-		{MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) {	/* startup */
-		{0x16, 0x0000, NULL}, /* Change Page Number */
-		/* Status is read once to clear old link state */
-		{MIIM_STATUS, miim_read, NULL},
-		/* Auto-negotiate */
-		{MIIM_STATUS, miim_read, &mii_parse_sr},
-		/* Read the status */
-		{MIIM_88E1011_PHY_STATUS, miim_read,
-		 &mii_parse_88E1011_psr},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) {	/* shutdown */
-		{miim_end,}
-	},
-};
-
-/*
- *  Since to access LED register we need do switch the page, we
- * do LED configuring in the miim_read-like function as follows
- */
-static uint mii_88E1121_set_led (uint mii_reg, struct tsec_private *priv)
-{
-	uint pg;
-
-	/* Switch the page to access the led register */
-	pg = read_phy_reg(priv, MIIM_88E1121_PHY_PAGE);
-	write_phy_reg(priv, MIIM_88E1121_PHY_PAGE, MIIM_88E1121_PHY_LED_PAGE);
-
-	/* Configure leds */
-	write_phy_reg(priv, MIIM_88E1121_PHY_LED_CTRL,
-		      MIIM_88E1121_PHY_LED_DEF);
-
-	/* Restore the page pointer */
-	write_phy_reg(priv, MIIM_88E1121_PHY_PAGE, pg);
-	return 0;
-}
-
-static struct phy_info phy_info_M88E1121R = {
-	0x01410cb,
-	"Marvell 88E1121R",
-	4,
-	(struct phy_cmd[]) {	/* config */
-		/* Reset and configure the PHY */
-		{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
-		{MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
-		{MIIM_ANAR, MIIM_ANAR_INIT, NULL},
-		/* Configure leds */
-		{MIIM_88E1121_PHY_LED_CTRL, miim_read, &mii_88E1121_set_led},
-		{MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
-		/* Disable IRQs and de-assert interrupt */
-		{MIIM_88E1121_PHY_IRQ_EN, 0, NULL},
-		{MIIM_88E1121_PHY_IRQ_STATUS, miim_read, NULL},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) {	/* startup */
-		/* Status is read once to clear old link state */
-		{MIIM_STATUS, miim_read, NULL},
-		{MIIM_STATUS, miim_read, &mii_parse_sr},
-		{MIIM_STATUS, miim_read, &mii_parse_link},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) {	/* shutdown */
-		{miim_end,}
-	},
-};
-
-static unsigned int m88e1145_setmode(uint mii_reg, struct tsec_private *priv)
-{
-	uint mii_data = read_phy_reg(priv, mii_reg);
-
-	/* Setting MIIM_88E1145_PHY_EXT_CR */
-	if (priv->flags & TSEC_REDUCED)
-		return mii_data |
-		    MIIM_M88E1145_RGMII_RX_DELAY | MIIM_M88E1145_RGMII_TX_DELAY;
-	else
-		return mii_data;
-}
-
-static struct phy_info phy_info_M88E1145 = {
-	0x01410cd,
-	"Marvell 88E1145",
-	4,
-	(struct phy_cmd[]) {	/* config */
-		/* Reset the PHY */
-		{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
-
-		/* Errata E0, E1 */
-		{29, 0x001b, NULL},
-		{30, 0x418f, NULL},
-		{29, 0x0016, NULL},
-		{30, 0xa2da, NULL},
-
-		/* Configure the PHY */
-		{MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
-		{MIIM_ANAR, MIIM_ANAR_INIT, NULL},
-		{MIIM_88E1011_PHY_SCR, MIIM_88E1011_PHY_MDI_X_AUTO, NULL},
-		{MIIM_88E1145_PHY_EXT_CR, 0, &m88e1145_setmode},
-		{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
-		{MIIM_CONTROL, MIIM_CONTROL_INIT, NULL},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) {	/* startup */
-		/* Status is read once to clear old link state */
-		{MIIM_STATUS, miim_read, NULL},
-		/* Auto-negotiate */
-		{MIIM_STATUS, miim_read, &mii_parse_sr},
-		{MIIM_88E1111_PHY_LED_CONTROL, MIIM_88E1111_PHY_LED_DIRECT, NULL},
-		/* Read the Status */
-		{MIIM_88E1011_PHY_STATUS, miim_read, &mii_parse_88E1011_psr},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) {	/* shutdown */
-		{miim_end,}
-	},
-};
-
-static struct phy_info phy_info_cis8204 = {
-	0x3f11,
-	"Cicada Cis8204",
-	6,
-	(struct phy_cmd[]) {	/* config */
-		/* Override PHY config settings */
-		{MIIM_CIS8201_AUX_CONSTAT, MIIM_CIS8201_AUXCONSTAT_INIT, NULL},
-		/* Configure some basic stuff */
-		{MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
-		{MIIM_CIS8204_SLED_CON, MIIM_CIS8204_SLEDCON_INIT,
-		 &mii_cis8204_fixled},
-		{MIIM_CIS8204_EPHY_CON, MIIM_CIS8204_EPHYCON_INIT,
-		 &mii_cis8204_setmode},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) {	/* startup */
-		/* Read the Status (2x to make sure link is right) */
-		{MIIM_STATUS, miim_read, NULL},
-		/* Auto-negotiate */
-		{MIIM_STATUS, miim_read, &mii_parse_sr},
-		/* Read the status */
-		{MIIM_CIS8201_AUX_CONSTAT, miim_read, &mii_parse_cis8201},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) {	/* shutdown */
-		{miim_end,}
-	},
-};
-
-/* Cicada 8201 */
-static struct phy_info phy_info_cis8201 = {
-	0xfc41,
-	"CIS8201",
-	4,
-	(struct phy_cmd[]) {	/* config */
-		/* Override PHY config settings */
-		{MIIM_CIS8201_AUX_CONSTAT, MIIM_CIS8201_AUXCONSTAT_INIT, NULL},
-		/* Set up the interface mode */
-		{MIIM_CIS8201_EXT_CON1, MIIM_CIS8201_EXTCON1_INIT, NULL},
-		/* Configure some basic stuff */
-		{MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) {	/* startup */
-		/* Read the Status (2x to make sure link is right) */
-		{MIIM_STATUS, miim_read, NULL},
-		/* Auto-negotiate */
-		{MIIM_STATUS, miim_read, &mii_parse_sr},
-		/* Read the status */
-		{MIIM_CIS8201_AUX_CONSTAT, miim_read, &mii_parse_cis8201},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) {	/* shutdown */
-		{miim_end,}
-	},
-};
-
-static struct phy_info phy_info_VSC8211 = {
-	0xfc4b,
-	"Vitesse VSC8211",
-	4,
-	(struct phy_cmd[]) { /* config */
-		/* Override PHY config settings */
-		{MIIM_CIS8201_AUX_CONSTAT, MIIM_CIS8201_AUXCONSTAT_INIT, NULL},
-		/* Set up the interface mode */
-		{MIIM_CIS8201_EXT_CON1, MIIM_CIS8201_EXTCON1_INIT, NULL},
-		/* Configure some basic stuff */
-		{MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) { /* startup */
-		/* Read the Status (2x to make sure link is right) */
-		{MIIM_STATUS, miim_read, NULL},
-		/* Auto-negotiate */
-		{MIIM_STATUS, miim_read, &mii_parse_sr},
-		/* Read the status */
-		{MIIM_CIS8201_AUX_CONSTAT, miim_read, &mii_parse_cis8201},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) { /* shutdown */
-		{miim_end,}
-	},
-};
-
-static struct phy_info phy_info_VSC8244 = {
-	0x3f1b,
-	"Vitesse VSC8244",
-	6,
-	(struct phy_cmd[]) {	/* config */
-		/* Override PHY config settings */
-		/* Configure some basic stuff */
-		{MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) {	/* startup */
-		/* Read the Status (2x to make sure link is right) */
-		{MIIM_STATUS, miim_read, NULL},
-		/* Auto-negotiate */
-		{MIIM_STATUS, miim_read, &mii_parse_sr},
-		/* Read the status */
-		{MIIM_VSC8244_AUX_CONSTAT, miim_read, &mii_parse_vsc8244},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) {	/* shutdown */
-		{miim_end,}
-	},
-};
-
-static struct phy_info phy_info_VSC8641 = {
-	0x7043,
-	"Vitesse VSC8641",
-	4,
-	(struct phy_cmd[]) {	/* config */
-		/* Configure some basic stuff */
-		{MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) {	/* startup */
-		/* Read the Status (2x to make sure link is right) */
-		{MIIM_STATUS, miim_read, NULL},
-		/* Auto-negotiate */
-		{MIIM_STATUS, miim_read, &mii_parse_sr},
-		/* Read the status */
-		{MIIM_VSC8244_AUX_CONSTAT, miim_read, &mii_parse_vsc8244},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) {	/* shutdown */
-		{miim_end,}
-	},
-};
-
-static struct phy_info phy_info_VSC8221 = {
-	0xfc55,
-	"Vitesse VSC8221",
-	4,
-	(struct phy_cmd[]) {	/* config */
-		/* Configure some basic stuff */
-		{MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) {	/* startup */
-		/* Read the Status (2x to make sure link is right) */
-		{MIIM_STATUS, miim_read, NULL},
-		/* Auto-negotiate */
-		{MIIM_STATUS, miim_read, &mii_parse_sr},
-		/* Read the status */
-		{MIIM_VSC8244_AUX_CONSTAT, miim_read, &mii_parse_vsc8244},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) {	/* shutdown */
-		{miim_end,}
-	},
-};
-
-static struct phy_info phy_info_VSC8601 = {
-	0x00007042,
-	"Vitesse VSC8601",
-	4,
-	(struct phy_cmd[]) {     /* config */
-		/* Override PHY config settings */
-		/* Configure some basic stuff */
-		{MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
-#ifdef CONFIG_SYS_VSC8601_SKEWFIX
-		{MIIM_VSC8601_EPHY_CON,MIIM_VSC8601_EPHY_CON_INIT_SKEW,NULL},
-#if defined(CONFIG_SYS_VSC8601_SKEW_TX) && defined(CONFIG_SYS_VSC8601_SKEW_RX)
-		{MIIM_EXT_PAGE_ACCESS,1,NULL},
-#define VSC8101_SKEW \
-	(CONFIG_SYS_VSC8601_SKEW_TX << 14) | (CONFIG_SYS_VSC8601_SKEW_RX << 12)
-		{MIIM_VSC8601_SKEW_CTRL,VSC8101_SKEW,NULL},
-		{MIIM_EXT_PAGE_ACCESS,0,NULL},
-#endif
-#endif
-		{MIIM_ANAR, MIIM_ANAR_INIT, NULL},
-		{MIIM_CONTROL, MIIM_CONTROL_RESTART, &mii_cr_init},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) {     /* startup */
-		/* Read the Status (2x to make sure link is right) */
-		{MIIM_STATUS, miim_read, NULL},
-		/* Auto-negotiate */
-		{MIIM_STATUS, miim_read, &mii_parse_sr},
-		/* Read the status */
-		{MIIM_VSC8244_AUX_CONSTAT, miim_read, &mii_parse_vsc8244},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) {     /* shutdown */
-		{miim_end,}
-	},
-};
-
-static struct phy_info phy_info_dm9161 = {
-	0x0181b88,
-	"Davicom DM9161E",
-	4,
-	(struct phy_cmd[]) {	/* config */
-		{MIIM_CONTROL, MIIM_DM9161_CR_STOP, NULL},
-		/* Do not bypass the scrambler/descrambler */
-		{MIIM_DM9161_SCR, MIIM_DM9161_SCR_INIT, NULL},
-		/* Clear 10BTCSR to default */
-		{MIIM_DM9161_10BTCSR, MIIM_DM9161_10BTCSR_INIT, NULL},
-		/* Configure some basic stuff */
-		{MIIM_CONTROL, MIIM_CR_INIT, NULL},
-		/* Restart Auto Negotiation */
-		{MIIM_CONTROL, MIIM_DM9161_CR_RSTAN, NULL},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) {	/* startup */
-		/* Status is read once to clear old link state */
-		{MIIM_STATUS, miim_read, NULL},
-		/* Auto-negotiate */
-		{MIIM_STATUS, miim_read, &mii_parse_sr},
-		/* Read the status */
-		{MIIM_DM9161_SCSR, miim_read, &mii_parse_dm9161_scsr},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) {	/* shutdown */
-		{miim_end,}
-	},
-};
-
-/* micrel KSZ804  */
-static struct phy_info phy_info_ksz804 =  {
-	0x0022151,
-	"Micrel KSZ804 PHY",
-	4,
-	(struct phy_cmd[]) { /* config */
-		{MII_BMCR, BMCR_RESET, NULL},
-		{MII_BMCR, BMCR_ANENABLE|BMCR_ANRESTART, NULL},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) { /* startup */
-		{MII_BMSR, miim_read, NULL},
-		{MII_BMSR, miim_read, &mii_parse_sr},
-		{MII_BMSR, miim_read, &mii_parse_link},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) { /* shutdown */
-		{miim_end,}
-	}
-};
-
-/* a generic flavor.  */
-static struct phy_info phy_info_generic =  {
-	0,
-	"Unknown/Generic PHY",
-	32,
-	(struct phy_cmd[]) { /* config */
-		{MII_BMCR, BMCR_RESET, NULL},
-		{MII_BMCR, BMCR_ANENABLE|BMCR_ANRESTART, NULL},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) { /* startup */
-		{MII_BMSR, miim_read, NULL},
-		{MII_BMSR, miim_read, &mii_parse_sr},
-		{MII_BMSR, miim_read, &mii_parse_link},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) { /* shutdown */
-		{miim_end,}
-	}
-};
-
-static uint mii_parse_lxt971_sr2(uint mii_reg, struct tsec_private *priv)
-{
-	unsigned int speed;
-	if (priv->link) {
-		speed = mii_reg & MIIM_LXT971_SR2_SPEED_MASK;
-
-		switch (speed) {
-		case MIIM_LXT971_SR2_10HDX:
-			priv->speed = 10;
-			priv->duplexity = 0;
-			break;
-		case MIIM_LXT971_SR2_10FDX:
-			priv->speed = 10;
-			priv->duplexity = 1;
-			break;
-		case MIIM_LXT971_SR2_100HDX:
-			priv->speed = 100;
-			priv->duplexity = 0;
-			break;
-		default:
-			priv->speed = 100;
-			priv->duplexity = 1;
-		}
-	} else {
-		priv->speed = 0;
-		priv->duplexity = 0;
-	}
-
-	return 0;
-}
-
-static struct phy_info phy_info_lxt971 = {
-	0x0001378e,
-	"LXT971",
-	4,
-	(struct phy_cmd[]) {	/* config */
-		{MIIM_CR, MIIM_CR_INIT, mii_cr_init},	/* autonegotiate */
-		{miim_end,}
-	},
-	(struct phy_cmd[]) {	/* startup - enable interrupts */
-		/* { 0x12, 0x00f2, NULL }, */
-		{MIIM_STATUS, miim_read, NULL},
-		{MIIM_STATUS, miim_read, &mii_parse_sr},
-		{MIIM_LXT971_SR2, miim_read, &mii_parse_lxt971_sr2},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) {	/* shutdown - disable interrupts */
-		{miim_end,}
-	},
-};
-
-/* Parse the DP83865's link and auto-neg status register for speed and duplex
- * information
- */
-static uint mii_parse_dp83865_lanr(uint mii_reg, struct tsec_private *priv)
-{
-	switch (mii_reg & MIIM_DP83865_SPD_MASK) {
-
-	case MIIM_DP83865_SPD_1000:
-		priv->speed = 1000;
-		break;
-
-	case MIIM_DP83865_SPD_100:
-		priv->speed = 100;
-		break;
-
-	default:
-		priv->speed = 10;
-		break;
-
-	}
-
-	if (mii_reg & MIIM_DP83865_DPX_FULL)
-		priv->duplexity = 1;
-	else
-		priv->duplexity = 0;
-
-	return 0;
-}
-
-static struct phy_info phy_info_dp83865 = {
-	0x20005c7,
-	"NatSemi DP83865",
-	4,
-	(struct phy_cmd[]) {	/* config */
-		{MIIM_CONTROL, MIIM_DP83865_CR_INIT, NULL},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) {	/* startup */
-		/* Status is read once to clear old link state */
-		{MIIM_STATUS, miim_read, NULL},
-		/* Auto-negotiate */
-		{MIIM_STATUS, miim_read, &mii_parse_sr},
-		/* Read the link and auto-neg status */
-		{MIIM_DP83865_LANR, miim_read, &mii_parse_dp83865_lanr},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) {	/* shutdown */
-		{miim_end,}
-	},
-};
-
-static struct phy_info phy_info_rtl8211b = {
-	0x001cc91,
-	"RealTek RTL8211B",
-	4,
-	(struct phy_cmd[]) {	/* config */
-		/* Reset and configure the PHY */
-		{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
-		{MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
-		{MIIM_ANAR, MIIM_ANAR_INIT, NULL},
-		{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
-		{MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) {	/* startup */
-		/* Status is read once to clear old link state */
-		{MIIM_STATUS, miim_read, NULL},
-		/* Auto-negotiate */
-		{MIIM_STATUS, miim_read, &mii_parse_sr},
-		/* Read the status */
-		{MIIM_RTL8211B_PHY_STATUS, miim_read, &mii_parse_RTL8211B_sr},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) {	/* shutdown */
-		{miim_end,}
-	},
-};
-
-struct phy_info phy_info_AR8021 =  {
-        0x4dd04,
-        "AR8021",
-        4,
-        (struct phy_cmd[]) { /* config */
-                {MII_BMCR, BMCR_RESET, NULL},
-                {MII_BMCR, BMCR_ANENABLE|BMCR_ANRESTART, NULL},
-                {0x1d, 0x05, NULL},
-                {0x1e, 0x3D47, NULL},
-                {miim_end,}
-        },
-        (struct phy_cmd[]) { /* startup */
-                {MII_BMSR, miim_read, NULL},
-                {MII_BMSR, miim_read, &mii_parse_sr},
-                {MII_BMSR, miim_read, &mii_parse_link},
-                {miim_end,}
-        },
-        (struct phy_cmd[]) { /* shutdown */
-                {miim_end,}
-        }
-};
-
-static struct phy_info *phy_info[] = {
-	&phy_info_cis8204,
-	&phy_info_cis8201,
-	&phy_info_BCM5461S,
-	&phy_info_BCM5464S,
-	&phy_info_BCM5482S,
-	&phy_info_M88E1011S,
-	&phy_info_M88E1111S,
-	&phy_info_M88E1118,
-	&phy_info_M88E1121R,
-	&phy_info_M88E1145,
-	&phy_info_M88E1149S,
-	&phy_info_dm9161,
-	&phy_info_ksz804,
-	&phy_info_lxt971,
-	&phy_info_VSC8211,
-	&phy_info_VSC8244,
-	&phy_info_VSC8601,
-	&phy_info_VSC8641,
-	&phy_info_VSC8221,
-	&phy_info_dp83865,
-	&phy_info_rtl8211b,
-	&phy_info_AR8021,
-	&phy_info_generic,	/* must be last; has ID 0 and 32 bit mask */
-	NULL
-};
-
-/* Grab the identifier of the device's PHY, and search through
- * all of the known PHYs to see if one matches.	 If so, return
- * it, if not, return NULL
- */
-static struct phy_info *get_phy_info(struct eth_device *dev)
-{
-	struct tsec_private *priv = (struct tsec_private *)dev->priv;
-	uint phy_reg, phy_ID;
-	int i;
-	struct phy_info *theInfo = NULL;
-
-	/* Grab the bits from PHYIR1, and put them in the upper half */
-	phy_reg = read_phy_reg(priv, MIIM_PHYIR1);
-	phy_ID = (phy_reg & 0xffff) << 16;
-
-	/* Grab the bits from PHYIR2, and put them in the lower half */
-	phy_reg = read_phy_reg(priv, MIIM_PHYIR2);
-	phy_ID |= (phy_reg & 0xffff);
-
-	/* loop through all the known PHY types, and find one that */
-	/* matches the ID we read from the PHY. */
-	for (i = 0; phy_info[i]; i++) {
-		if (phy_info[i]->id == (phy_ID >> phy_info[i]->shift)) {
-			theInfo = phy_info[i];
-			break;
-		}
-	}
-
-	if (theInfo == &phy_info_generic) {
-		printf("%s: No support for PHY id %x; assuming generic\n",
-			dev->name, phy_ID);
-	} else {
-		debug("%s: PHY is %s (%x)\n", dev->name, theInfo->name, phy_ID);
-	}
-
-	return theInfo;
-}
-
-/* Execute the given series of commands on the given device's
- * PHY, running functions as necessary
- */
-static void phy_run_commands(struct tsec_private *priv, struct phy_cmd *cmd)
-{
-	int i;
-	uint result;
-	tsec_mdio_t *phyregs = priv->phyregs;
-
-	out_be32(&phyregs->miimcfg, MIIMCFG_RESET);
-
-	out_be32(&phyregs->miimcfg, MIIMCFG_INIT_VALUE);
-
-	while (in_be32(&phyregs->miimind) & MIIMIND_BUSY)
-		;
-
-	for (i = 0; cmd->mii_reg != miim_end; i++) {
-		if (cmd->mii_data == miim_read) {
-			result = read_phy_reg(priv, cmd->mii_reg);
-
-			if (cmd->funct != NULL)
-				(*(cmd->funct)) (result, priv);
-
-		} else {
-			if (cmd->funct != NULL)
-				result = (*(cmd->funct)) (cmd->mii_reg, priv);
-			else
-				result = cmd->mii_data;
-
-			write_phy_reg(priv, cmd->mii_reg, result);
-
-		}
-		cmd++;
-	}
-}
-
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) \
-	&& !defined(BITBANGMII)
-
-/*
- * Read a MII PHY register.
- *
- * Returns:
- *  0 on success
- */
-static int tsec_miiphy_read(const char *devname, unsigned char addr,
-			    unsigned char reg, unsigned short *value)
-{
-	unsigned short ret;
-	struct tsec_private *priv = privlist[0];
-
-	if (NULL == priv) {
-		printf("Can't read PHY at address %d\n", addr);
-		return -1;
-	}
-
-	ret = (unsigned short)tsec_local_mdio_read(priv->phyregs, addr, reg);
-	*value = ret;
-
-	return 0;
-}
-
-/*
- * Write a MII PHY register.
- *
- * Returns:
- *  0 on success
- */
-static int tsec_miiphy_write(const char *devname, unsigned char addr,
-			     unsigned char reg, unsigned short value)
-{
-	struct tsec_private *priv = privlist[0];
-
-	if (NULL == priv) {
-		printf("Can't write PHY at address %d\n", addr);
-		return -1;
-	}
-
-	tsec_local_mdio_write(priv->phyregs, addr, reg, value);
-
-	return 0;
-}
-
-#endif
-
 #ifdef CONFIG_MCAST_TFTP
 
 /* CREDITS: linux gianfar driver, slightly adjusted... thanx. */
@@ -1635,14 +189,13 @@ static void init_registers(tsec_t *regs)
 /* Configure maccfg2 based on negotiated speed and duplex
  * reported by PHY handling code
  */
-static void adjust_link(struct eth_device *dev)
+static void adjust_link(struct tsec_private *priv, struct phy_device *phydev)
 {
-	struct tsec_private *priv = (struct tsec_private *)dev->priv;
 	tsec_t *regs = priv->regs;
 	u32 ecntrl, maccfg2;
 
-	if (!priv->link) {
-		printf("%s: No link.\n", dev->name);
+	if (!phydev->link) {
+		printf("%s: No link.\n", phydev->dev->name);
 		return;
 	}
 
@@ -1653,10 +206,10 @@ static void adjust_link(struct eth_device *dev)
 	maccfg2 = in_be32(&regs->maccfg2);
 	maccfg2 &= ~(MACCFG2_IF | MACCFG2_FULL_DUPLEX);
 
-	if (priv->duplexity)
+	if (phydev->duplex)
 		maccfg2 |= MACCFG2_FULL_DUPLEX;
 
-	switch (priv->speed) {
+	switch (phydev->speed) {
 	case 1000:
 		maccfg2 |= MACCFG2_GMII;
 		break;
@@ -1667,20 +220,20 @@ static void adjust_link(struct eth_device *dev)
 		/* Set R100 bit in all modes although
 		 * it is only used in RGMII mode
 		 */
-		if (priv->speed == 100)
+		if (phydev->speed == 100)
 			ecntrl |= ECNTRL_R100;
 		break;
 	default:
-		printf("%s: Speed was bad\n", dev->name);
+		printf("%s: Speed was bad\n", phydev->dev->name);
 		break;
 	}
 
 	out_be32(&regs->ecntrl, ecntrl);
 	out_be32(&regs->maccfg2, maccfg2);
 
-	printf("Speed: %d, %s duplex%s\n", priv->speed,
-			(priv->duplexity) ? "full" : "half",
-			(priv->flags & TSEC_FIBER) ? ", fiber mode" : "");
+	printf("Speed: %d, %s duplex%s\n", phydev->speed,
+			(phydev->duplex) ? "full" : "half",
+			(phydev->port == PORT_FIBRE) ? ", fiber mode" : "");
 }
 
 /* Set up the buffers and their descriptors, and bring up the
@@ -1692,6 +245,10 @@ static void startup_tsec(struct eth_device *dev)
 	struct tsec_private *priv = (struct tsec_private *)dev->priv;
 	tsec_t *regs = priv->regs;
 
+	/* reset the indices to zero */
+	rxIdx = 0;
+	txIdx = 0;
+
 	/* Point to the buffer descriptors */
 	out_be32(&regs->tbase, (unsigned int)(&rtx.txbd[txIdx]));
 	out_be32(&regs->rbase, (unsigned int)(&rtx.rxbd[rxIdx]));
@@ -1712,12 +269,6 @@ static void startup_tsec(struct eth_device *dev)
 	}
 	rtx.txbd[TX_BUF_CNT - 1].status |= TXBD_WRAP;
 
-	/* Start up the PHY */
-	if (priv->phyinfo)
-		phy_run_commands(priv, priv->phyinfo->startup);
-
-	adjust_link(dev);
-
 	/* Enable Transmit and Receive */
 	setbits_be32(&regs->maccfg1, MACCFG1_RX_EN | MACCFG1_TX_EN);
 
@@ -1822,8 +373,7 @@ static void tsec_halt(struct eth_device *dev)
 	clrbits_be32(&regs->maccfg1, MACCFG1_TX_EN | MACCFG1_RX_EN);
 
 	/* Shut down the PHY, as needed */
-	if (priv->phyinfo)
-		phy_run_commands(priv, priv->phyinfo->shutdown);
+	phy_shutdown(priv->phydev);
 }
 
 /* Initializes data structures and registers for the controller,
@@ -1862,20 +412,64 @@ static int tsec_init(struct eth_device *dev, bd_t * bd)
 
 	out_be32(&regs->macstnaddr2, tempval);
 
-	/* reset the indices to zero */
-	rxIdx = 0;
-	txIdx = 0;
-
 	/* Clear out (for the most part) the other registers */
 	init_registers(regs);
 
 	/* Ready the device for tx/rx */
 	startup_tsec(dev);
 
+	/* Start up the PHY */
+	phy_startup(priv->phydev);
+
+	adjust_link(priv, priv->phydev);
+
 	/* If there's no link, fail */
-	return priv->link ? 0 : -1;
+	return priv->phydev->link ? 0 : -1;
+}
+
+static phy_interface_t tsec_get_interface(struct tsec_private *priv)
+{
+	tsec_t *regs = priv->regs;
+	u32 ecntrl;
+
+	ecntrl = in_be32(&regs->ecntrl);
+
+	if (ecntrl & ECNTRL_SGMII_MODE)
+		return PHY_INTERFACE_MODE_SGMII;
+
+	if (ecntrl & ECNTRL_TBI_MODE) {
+		if (ecntrl & ECNTRL_REDUCED_MODE)
+			return PHY_INTERFACE_MODE_RTBI;
+		else
+			return PHY_INTERFACE_MODE_TBI;
+	}
+
+	if (ecntrl & ECNTRL_REDUCED_MODE) {
+		if (ecntrl & ECNTRL_REDUCED_MII_MODE)
+			return PHY_INTERFACE_MODE_RMII;
+		else {
+			phy_interface_t interface = priv->interface;
+
+			/*
+			 * This isn't autodetected, so it must
+			 * be set by the platform code.
+			 */
+			if ((interface == PHY_INTERFACE_MODE_RGMII_ID) ||
+				 (interface == PHY_INTERFACE_MODE_RGMII_TXID) ||
+				 (interface == PHY_INTERFACE_MODE_RGMII_RXID))
+				return interface;
+
+			return PHY_INTERFACE_MODE_RGMII;
+		}
+	}
+
+	if (priv->flags & TSEC_GIGABIT)
+		return PHY_INTERFACE_MODE_GMII;
+
+	return PHY_INTERFACE_MODE_MII;
 }
 
+
 /* Discover which PHY is attached to the device, and configure it
  * properly.  If the PHY is not recognized, then return 0
  * (failure).  Otherwise, return 1
@@ -1883,35 +477,32 @@ static int tsec_init(struct eth_device *dev, bd_t * bd)
 static int init_phy(struct eth_device *dev)
 {
 	struct tsec_private *priv = (struct tsec_private *)dev->priv;
-	struct phy_info *curphy;
+	struct phy_device *phydev;
 	tsec_t *regs = priv->regs;
+	u32 supported = (SUPPORTED_10baseT_Half |
+			SUPPORTED_10baseT_Full |
+			SUPPORTED_100baseT_Half |
+			SUPPORTED_100baseT_Full);
+
+	if (priv->flags & TSEC_GIGABIT)
+		supported |= SUPPORTED_1000baseT_Full;
 
 	/* Assign a Physical address to the TBI */
 	out_be32(&regs->tbipa, CONFIG_SYS_TBIPA_VALUE);
 
-	/* Reset MII (due to new addresses) */
-	out_be32(&priv->phyregs->miimcfg, MIIMCFG_RESET);
-	out_be32(&priv->phyregs->miimcfg, MIIMCFG_INIT_VALUE);
-	while (in_be32(&priv->phyregs->miimind) & MIIMIND_BUSY)
-		;
-
-	/* Get the cmd structure corresponding to the attached
-	 * PHY */
-	curphy = get_phy_info(dev);
+	priv->interface = tsec_get_interface(priv);
 
-	if (curphy == NULL) {
-		priv->phyinfo = NULL;
-		printf("%s: No PHY found\n", dev->name);
+	if (priv->interface == PHY_INTERFACE_MODE_SGMII)
+		tsec_configure_serdes(priv);
 
-		return 0;
-	}
+	phydev = phy_connect(priv->bus, priv->phyaddr, dev, priv->interface);
 
-	if (in_be32(&regs->ecntrl) & ECNTRL_SGMII_MODE)
-		tsec_configure_serdes(priv);
+	phydev->supported &= supported;
+	phydev->advertising = phydev->supported;
 
-	priv->phyinfo = curphy;
+	priv->phydev = phydev;
 
-	phy_run_commands(priv, priv->phyinfo->config);
+	phy_config(phydev);
 
 	return 1;
 }
@@ -1939,13 +530,14 @@ static int tsec_initialize(bd_t *bis, struct tsec_info_struct *tsec_info)
 
 	privlist[num_tsecs++] = priv;
 	priv->regs = tsec_info->regs;
-	priv->phyregs = tsec_info->miiregs;
 	priv->phyregs_sgmii = tsec_info->miiregs_sgmii;
 
 	priv->phyaddr = tsec_info->phyaddr;
 	priv->flags = tsec_info->flags;
 
 	sprintf(dev->name, tsec_info->devname);
+	priv->interface = tsec_info->interface;
+	priv->bus = miiphy_get_dev_by_name(tsec_info->mii_devname);
 	dev->iobase = 0;
 	dev->priv = priv;
 	dev->init = tsec_init;
@@ -1967,11 +559,6 @@ static int tsec_initialize(bd_t *bis, struct tsec_info_struct *tsec_info)
 	udelay(2);  /* Soft Reset must be asserted for 3 TX clocks */
 	clrbits_be32(&priv->regs->maccfg1, MACCFG1_SOFT_RESET);
 
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) \
-	&& !defined(BITBANGMII)
-	miiphy_register(dev->name, tsec_miiphy_read, tsec_miiphy_write);
-#endif
-
 	/* Try to initialize PHY here, and return */
 	return init_phy(dev);
 }
@@ -1997,6 +584,13 @@ int tsec_eth_init(bd_t *bis, struct tsec_info_struct *tsecs, int num)
 
 int tsec_standard_init(bd_t *bis)
 {
+	struct fsl_pq_mdio_info info;
+
+	info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+	info.name = DEFAULT_MII_NAME;
+
+	fsl_pq_mdio_init(bis, &info);
+
 	return tsec_eth_init(bis, tsec_info, ARRAY_SIZE(tsec_info));
 }
 
diff --git a/include/fsl_mdio.h b/include/fsl_mdio.h
new file mode 100644
index 0000000..17ca79c
--- /dev/null
+++ b/include/fsl_mdio.h
@@ -0,0 +1,62 @@
+/*
+ * Copyright 2009-2010 Freescale Semiconductor, Inc.
+ *	Jun-jie Zhang <b18070@freescale.com>
+ *	Mingkai Hu <Mingkai.hu@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __FSL_PHY_H__
+#define __FSL_PHY_H__
+
+#include <net.h>
+#include <miiphy.h>
+#include <asm/fsl_enet.h>
+
+/* PHY register offsets */
+#define PHY_EXT_PAGE_ACCESS	0x1f
+
+/* MII Management Configuration Register */
+#define MIIMCFG_RESET_MGMT          0x80000000
+#define MIIMCFG_MGMT_CLOCK_SELECT   0x00000007
+#define MIIMCFG_INIT_VALUE	    0x00000003
+
+/* MII Management Command Register */
+#define MIIMCOM_READ_CYCLE	0x00000001
+#define MIIMCOM_SCAN_CYCLE	0x00000002
+
+/* MII Management Address Register */
+#define MIIMADD_PHY_ADDR_SHIFT	8
+
+/* MII Management Indicator Register */
+#define MIIMIND_BUSY		0x00000001
+#define MIIMIND_NOTVALID	0x00000004
+
+void tsec_local_mdio_write(struct tsec_mii_mng *phyregs, int port_addr,
+		int dev_addr, int reg, int value);
+int tsec_local_mdio_read(struct tsec_mii_mng *phyregs, int port_addr,
+		int dev_addr, int regnum);
+int tsec_phy_read(struct mii_dev *bus, int addr, int dev_addr, int regnum);
+int tsec_phy_write(struct mii_dev *bus, int addr, int dev_addr, int regnum,
+		u16 value);
+
+struct fsl_pq_mdio_info {
+	struct tsec_mii_mng *regs;
+	char *name;
+};
+int fsl_pq_mdio_init(bd_t *bis, struct fsl_pq_mdio_info *info);
+
+#endif /* __FSL_PHY_H__ */
+
diff --git a/include/tsec.h b/include/tsec.h
index a066d97..8ed30ac 100644
--- a/include/tsec.h
+++ b/include/tsec.h
@@ -19,30 +19,36 @@
 
 #include <net.h>
 #include <config.h>
+#include <phy.h>
+#include <asm/fsl_enet.h>
 
 #define TSEC_SIZE 		0x01000
 #define TSEC_MDIO_OFFSET	0x01000
 
+#define CONFIG_SYS_MDIO_BASE_ADDR (TSEC_BASE_ADDR + 0x520)
+
+#define DEFAULT_MII_NAME "FSL_MDIO"
+
 #define STD_TSEC_INFO(num) \
 {			\
 	.regs = (tsec_t *)(TSEC_BASE_ADDR + ((num - 1) * TSEC_SIZE)), \
-	.miiregs = (tsec_mdio_t *)(MDIO_BASE_ADDR), \
-	.miiregs_sgmii = (tsec_mdio_t *)(MDIO_BASE_ADDR \
+	.miiregs_sgmii = (struct tsec_mii_mng *)(CONFIG_SYS_MDIO_BASE_ADDR \
 					 + (num - 1) * TSEC_MDIO_OFFSET), \
 	.devname = CONFIG_TSEC##num##_NAME, \
 	.phyaddr = TSEC##num##_PHY_ADDR, \
-	.flags = TSEC##num##_FLAGS \
+	.flags = TSEC##num##_FLAGS, \
+	.mii_devname = DEFAULT_MII_NAME \
 }
 
 #define SET_STD_TSEC_INFO(x, num) \
 {			\
 	x.regs = (tsec_t *)(TSEC_BASE_ADDR + ((num - 1) * TSEC_SIZE)); \
-	x.miiregs = (tsec_mdio_t *)(MDIO_BASE_ADDR); \
-	x.miiregs_sgmii = (tsec_mdio_t *)(MDIO_BASE_ADDR \
+	x.miiregs_sgmii = (struct tsec_mii_mng *)(CONFIG_SYS_MDIO_BASE_ADDR \
 					  + (num - 1) * TSEC_MDIO_OFFSET); \
 	x.devname = CONFIG_TSEC##num##_NAME; \
 	x.phyaddr = TSEC##num##_PHY_ADDR; \
 	x.flags = TSEC##num##_FLAGS;\
+	x.mii_devname = DEFAULT_MII_NAME;\
 }
 
 #define MAC_ADDR_LEN 6
@@ -51,8 +57,6 @@
 #define TSEC_TIMEOUT 1000
 #define TOUT_LOOP	1000000
 
-#define PHY_AUTONEGOTIATE_TIMEOUT	5000 /* in ms */
-
 /* TBI register addresses */
 #define TBI_CR			0x00
 #define TBI_SR			0x01
@@ -96,204 +100,14 @@
 
 #define ECNTRL_INIT_SETTINGS	0x00001000
 #define ECNTRL_TBI_MODE		0x00000020
+#define ECNTRL_REDUCED_MODE	0x00000010
 #define ECNTRL_R100		0x00000008
+#define ECNTRL_REDUCED_MII_MODE	0x00000004
 #define ECNTRL_SGMII_MODE	0x00000002
 
-#define miim_end -2
-#define miim_read -1
-
 #ifndef CONFIG_SYS_TBIPA_VALUE
     #define CONFIG_SYS_TBIPA_VALUE	0x1f
 #endif
-#define MIIMCFG_INIT_VALUE	0x00000003
-#define MIIMCFG_RESET		0x80000000
-
-#define MIIMIND_BUSY		0x00000001
-#define MIIMIND_NOTVALID	0x00000004
-
-#define MIIM_CONTROL		0x00
-#define MIIM_CONTROL_RESET	0x00009140
-#define MIIM_CONTROL_INIT	0x00001140
-#define MIIM_CONTROL_RESTART	0x00001340
-#define MIIM_ANEN		0x00001000
-
-#define MIIM_CR			0x00
-#define MIIM_CR_RST		0x00008000
-#define MIIM_CR_INIT		0x00001000
-
-#define MIIM_STATUS		0x1
-#define MIIM_STATUS_AN_DONE	0x00000020
-#define MIIM_STATUS_LINK	0x0004
-
-#define MIIM_PHYIR1		0x2
-#define MIIM_PHYIR2		0x3
-
-#define MIIM_ANAR		0x4
-#define MIIM_ANAR_INIT		0x1e1
-
-#define MIIM_TBI_ANLPBPA	0x5
-#define MIIM_TBI_ANLPBPA_HALF	0x00000040
-#define MIIM_TBI_ANLPBPA_FULL	0x00000020
-
-#define MIIM_TBI_ANEX		0x6
-#define MIIM_TBI_ANEX_NP	0x00000004
-#define MIIM_TBI_ANEX_PRX	0x00000002
-
-#define MIIM_GBIT_CONTROL	0x9
-#define MIIM_GBIT_CONTROL_INIT	0xe00
-
-#define MIIM_EXT_PAGE_ACCESS	0x1f
-
-/* Broadcom BCM54xx -- taken from linux sungem_phy */
-#define MIIM_BCM54xx_AUXCNTL			0x18
-#define MIIM_BCM54xx_AUXCNTL_ENCODE(val)	((val & 0x7) << 12)|(val & 0x7)
-#define MIIM_BCM54xx_AUXSTATUS			0x19
-#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK	0x0700
-#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT	8
-
-#define MIIM_BCM54XX_SHD	0x1c	/* 0x1c shadow registers */
-#define MIIM_BCM54XX_SHD_WRITE	0x8000
-#define MIIM_BCM54XX_SHD_VAL(x)	((x & 0x1f) << 10)
-#define MIIM_BCM54XX_SHD_DATA(x)	((x & 0x3ff) << 0)
-#define MIIM_BCM54XX_SHD_WR_ENCODE(val, data)	\
-	(MIIM_BCM54XX_SHD_WRITE | MIIM_BCM54XX_SHD_VAL(val) | \
-	 MIIM_BCM54XX_SHD_DATA(data))
-
-#define MIIM_BCM54XX_EXP_DATA	0x15	/* Expansion register data */
-#define MIIM_BCM54XX_EXP_SEL	0x17	/* Expansion register select */
-#define MIIM_BCM54XX_EXP_SEL_SSD	0x0e00	/* Secondary SerDes select */
-#define MIIM_BCM54XX_EXP_SEL_ER	0x0f00	/* Expansion register select */
-
-/* Cicada Auxiliary Control/Status Register */
-#define MIIM_CIS8201_AUX_CONSTAT	0x1c
-#define MIIM_CIS8201_AUXCONSTAT_INIT	0x0004
-#define MIIM_CIS8201_AUXCONSTAT_DUPLEX	0x0020
-#define MIIM_CIS8201_AUXCONSTAT_SPEED	0x0018
-#define MIIM_CIS8201_AUXCONSTAT_GBIT	0x0010
-#define MIIM_CIS8201_AUXCONSTAT_100	0x0008
-
-/* Cicada Extended Control Register 1 */
-#define MIIM_CIS8201_EXT_CON1		0x17
-#define MIIM_CIS8201_EXTCON1_INIT	0x0000
-
-/* Cicada 8204 Extended PHY Control Register 1 */
-#define MIIM_CIS8204_EPHY_CON		0x17
-#define MIIM_CIS8204_EPHYCON_INIT	0x0006
-#define MIIM_CIS8204_EPHYCON_RGMII	0x1100
-
-/* Cicada 8204 Serial LED Control Register */
-#define MIIM_CIS8204_SLED_CON		0x1b
-#define MIIM_CIS8204_SLEDCON_INIT	0x1115
-
-#define MIIM_GBIT_CON		0x09
-#define MIIM_GBIT_CON_ADVERT	0x0e00
-
-/* Entry for Vitesse VSC8244 regs starts here */
-/* Vitesse VSC8244 Auxiliary Control/Status Register */
-#define MIIM_VSC8244_AUX_CONSTAT	0x1c
-#define MIIM_VSC8244_AUXCONSTAT_INIT	0x0000
-#define MIIM_VSC8244_AUXCONSTAT_DUPLEX	0x0020
-#define MIIM_VSC8244_AUXCONSTAT_SPEED	0x0018
-#define MIIM_VSC8244_AUXCONSTAT_GBIT	0x0010
-#define MIIM_VSC8244_AUXCONSTAT_100	0x0008
-#define MIIM_CONTROL_INIT_LOOPBACK	0x4000
-
-/* Vitesse VSC8244 Extended PHY Control Register 1 */
-#define MIIM_VSC8244_EPHY_CON		0x17
-#define MIIM_VSC8244_EPHYCON_INIT	0x0006
-
-/* Vitesse VSC8244 Serial LED Control Register */
-#define MIIM_VSC8244_LED_CON		0x1b
-#define MIIM_VSC8244_LEDCON_INIT	0xF011
-
-/* Entry for Vitesse VSC8601 regs starts here (Not complete) */
-/* Vitesse VSC8601 Extended PHY Control Register 1 */
-#define MIIM_VSC8601_EPHY_CON		0x17
-#define MIIM_VSC8601_EPHY_CON_INIT_SKEW	0x1120
-#define MIIM_VSC8601_SKEW_CTRL		0x1c
-
-/* 88E1011 PHY Status Register */
-#define MIIM_88E1011_PHY_STATUS		0x11
-#define MIIM_88E1011_PHYSTAT_SPEED	0xc000
-#define MIIM_88E1011_PHYSTAT_GBIT	0x8000
-#define MIIM_88E1011_PHYSTAT_100	0x4000
-#define MIIM_88E1011_PHYSTAT_DUPLEX	0x2000
-#define MIIM_88E1011_PHYSTAT_SPDDONE	0x0800
-#define MIIM_88E1011_PHYSTAT_LINK	0x0400
-
-#define MIIM_88E1011_PHY_SCR		0x10
-#define MIIM_88E1011_PHY_MDI_X_AUTO	0x0060
-
-/* 88E1111 PHY LED Control Register */
-#define MIIM_88E1111_PHY_LED_CONTROL	24
-#define MIIM_88E1111_PHY_LED_DIRECT	0x4100
-#define MIIM_88E1111_PHY_LED_COMBINE	0x411C
-
-/* 88E1121 PHY LED Control Register */
-#define MIIM_88E1121_PHY_LED_CTRL	16
-#define MIIM_88E1121_PHY_LED_PAGE	3
-#define MIIM_88E1121_PHY_LED_DEF	0x0030
-
-/* 88E1121 PHY IRQ Enable/Status Register */
-#define MIIM_88E1121_PHY_IRQ_EN		18
-#define MIIM_88E1121_PHY_IRQ_STATUS	19
-
-#define MIIM_88E1121_PHY_PAGE		22
-
-/* 88E1145 Extended PHY Specific Control Register */
-#define MIIM_88E1145_PHY_EXT_CR 20
-#define MIIM_M88E1145_RGMII_RX_DELAY	0x0080
-#define MIIM_M88E1145_RGMII_TX_DELAY	0x0002
-
-#define MIIM_88E1145_PHY_PAGE	29
-#define MIIM_88E1145_PHY_CAL_OV 30
-
-/* RTL8211B PHY Status Register */
-#define MIIM_RTL8211B_PHY_STATUS	0x11
-#define MIIM_RTL8211B_PHYSTAT_SPEED	0xc000
-#define MIIM_RTL8211B_PHYSTAT_GBIT	0x8000
-#define MIIM_RTL8211B_PHYSTAT_100	0x4000
-#define MIIM_RTL8211B_PHYSTAT_DUPLEX	0x2000
-#define MIIM_RTL8211B_PHYSTAT_SPDDONE	0x0800
-#define MIIM_RTL8211B_PHYSTAT_LINK	0x0400
-
-/* DM9161 Control register values */
-#define MIIM_DM9161_CR_STOP	0x0400
-#define MIIM_DM9161_CR_RSTAN	0x1200
-
-#define MIIM_DM9161_SCR		0x10
-#define MIIM_DM9161_SCR_INIT	0x0610
-
-/* DM9161 Specified Configuration and Status Register */
-#define MIIM_DM9161_SCSR	0x11
-#define MIIM_DM9161_SCSR_100F	0x8000
-#define MIIM_DM9161_SCSR_100H	0x4000
-#define MIIM_DM9161_SCSR_10F	0x2000
-#define MIIM_DM9161_SCSR_10H	0x1000
-
-/* DM9161 10BT Configuration/Status */
-#define MIIM_DM9161_10BTCSR	0x12
-#define MIIM_DM9161_10BTCSR_INIT	0x7800
-
-/* LXT971 Status 2 registers */
-#define MIIM_LXT971_SR2		     0x11  /* Status Register 2  */
-#define MIIM_LXT971_SR2_SPEED_MASK 0x4200
-#define MIIM_LXT971_SR2_10HDX	   0x0000  /*  10 Mbit half duplex selected */
-#define MIIM_LXT971_SR2_10FDX	   0x0200  /*  10 Mbit full duplex selected */
-#define MIIM_LXT971_SR2_100HDX	   0x4000  /* 100 Mbit half duplex selected */
-#define MIIM_LXT971_SR2_100FDX	   0x4200  /* 100 Mbit full duplex selected */
-
-/* DP83865 Control register values */
-#define MIIM_DP83865_CR_INIT	0x9200
-
-/* DP83865 Link and Auto-Neg Status Register */
-#define MIIM_DP83865_LANR	0x11
-#define MIIM_DP83865_SPD_MASK	0x0018
-#define MIIM_DP83865_SPD_1000	0x0010
-#define MIIM_DP83865_SPD_100	0x0008
-#define MIIM_DP83865_DPX_FULL	0x0002
-
-#define MIIM_READ_COMMAND	0x00000001
 
 #define MRBLR_INIT_SETTINGS	PKTSIZE_ALIGN
 
@@ -467,22 +281,6 @@ typedef struct tsec_hash_regs
 	uint	res2[24];
 } tsec_hash_t;
 
-typedef struct tsec_mdio {
-	uint	res1[4];
-	uint	ieventm;
-	uint	imaskm;
-	uint	res2;
-	uint	emapm;
-	uint	res3[320];
-	uint	miimcfg;	/* MII Management: Configuration */
-	uint	miimcom;	/* MII Management: Command */
-	uint	miimadd;	/* MII Management: Address */
-	uint	miimcon;	/* MII Management: Control */
-	uint	miimstat;	/* MII Management: Status */
-	uint	miimind;	/* MII Management: Indicators */
-	uint	res4[690];
-} tsec_mdio_t;
-
 typedef struct tsec
 {
 	/* General Control and Status Registers (0x2_n000) */
@@ -578,79 +376,29 @@ typedef struct tsec
 	uint	resc00[256];
 } tsec_t;
 
-#define TSEC_GIGABIT (1)
+#define TSEC_GIGABIT (1 << 0)
 
-/* This flag currently only has
- * meaning if we're using the eTSEC */
+/* These flags currently only have meaning if we're using the eTSEC */
 #define TSEC_REDUCED	(1 << 1)	/* MAC-PHY interface uses RGMII */
 #define TSEC_SGMII	(1 << 2)	/* MAC-PHY interface uses SGMII */
-#define TSEC_FIBER	(1 << 3)	/* PHY uses fiber, eg 1000 Base-X */
 
 struct tsec_private {
 	tsec_t *regs;
-	tsec_mdio_t *phyregs;
-	tsec_mdio_t *phyregs_sgmii;
-	struct phy_info *phyinfo;
+	struct tsec_mii_mng *phyregs_sgmii;
+	struct phy_device *phydev;
+	phy_interface_t interface;
+	struct mii_dev *bus;
 	uint phyaddr;
+	char mii_devname[16];
 	u32 flags;
-	uint link;
-	uint duplexity;
-	uint speed;
-};
-
-
-/*
- * struct phy_cmd:  A command for reading or writing a PHY register
- *
- * mii_reg:  The register to read or write
- *
- * mii_data:  For writes, the value to put in the register.
- *	A value of -1 indicates this is a read.
- *
- * funct: A function pointer which is invoked for each command.
- *	For reads, this function will be passed the value read
- *	from the PHY, and process it.
- *	For writes, the result of this function will be written
- *	to the PHY register
- */
-struct phy_cmd {
-	uint mii_reg;
-	uint mii_data;
-	uint (*funct) (uint mii_reg, struct tsec_private * priv);
-};
-
-/* struct phy_info: a structure which defines attributes for a PHY
- *
- * id will contain a number which represents the PHY.  During
- * startup, the driver will poll the PHY to find out what its
- * UID--as defined by registers 2 and 3--is.  The 32-bit result
- * gotten from the PHY will be shifted right by "shift" bits to
- * discard any bits which may change based on revision numbers
- * unimportant to functionality
- *
- * The struct phy_cmd entries represent pointers to an arrays of
- * commands which tell the driver what to do to the PHY.
- */
-struct phy_info {
-	uint id;
-	char *name;
-	uint shift;
-	/* Called to configure the PHY, and modify the controller
-	 * based on the results */
-	struct phy_cmd *config;
-
-	/* Called when starting up the controller */
-	struct phy_cmd *startup;
-
-	/* Called when bringing down the controller */
-	struct phy_cmd *shutdown;
 };
 
 struct tsec_info_struct {
 	tsec_t *regs;
-	tsec_mdio_t *miiregs;
-	tsec_mdio_t *miiregs_sgmii;
+	struct tsec_mii_mng *miiregs_sgmii;
 	char *devname;
+	char *mii_devname;
+	phy_interface_t interface;
 	unsigned int phyaddr;
 	u32 flags;
 };
