diff mbox

[U-Boot,03/17] trigger hardware watchdog in IXP42x serial driver

Message ID 1296860763-16149-4-git-send-email-michael@schwingen.org
State Superseded
Commit 009e464802569bc97c03c52f76fdf7e38040b634
Headers show

Commit Message

Michael Schwingen Feb. 4, 2011, 11:05 p.m. UTC 
Signed-off-by: Michael Schwingen <michael@schwingen.org>
---
 drivers/serial/serial_ixp.c |    7 +++++--
 1 files changed, 5 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/drivers/serial/serial_ixp.c b/drivers/serial/serial_ixp.c
index dd26af4..a9acd47 100644
--- a/drivers/serial/serial_ixp.c
+++ b/drivers/serial/serial_ixp.c
@@ -30,6 +30,7 @@ 
 
 #include <common.h>
 #include <asm/arch/ixp425.h>
+#include <watchdog.h>
 
 /*
  *               14.7456 MHz
@@ -85,7 +86,8 @@  int serial_init (void)
 void serial_putc (const char c)
 {
 	/* wait for room in the tx FIFO on UART */
-	while ((LSR(CONFIG_SYS_IXP425_CONSOLE) & LSR_TEMT) == 0);
+	while ((LSR(CONFIG_SYS_IXP425_CONSOLE) & LSR_TEMT) == 0)
+		WATCHDOG_RESET();	/* Reset HW Watchdog, if needed */
 
 	THR(CONFIG_SYS_IXP425_CONSOLE) = c;
 
@@ -111,7 +113,8 @@  int serial_tstc (void)
  */
 int serial_getc (void)
 {
-	while (!(LSR(CONFIG_SYS_IXP425_CONSOLE) & LSR_DR));
+	while (!(LSR(CONFIG_SYS_IXP425_CONSOLE) & LSR_DR))
+		WATCHDOG_RESET();	/* Reset HW Watchdog, if needed */
 
 	return (char) RBR(CONFIG_SYS_IXP425_CONSOLE) & 0xff;
 }