mbox series

[V2,0/9] Add Anbernic RG35XX-2024

Message ID 20240819145938.503221-1-macroalpha82@gmail.com
Headers show
Series Add Anbernic RG35XX-2024 | expand

Message

Chris Morgan Aug. 19, 2024, 2:59 p.m. UTC 
From: Chris Morgan <macromorgan@hotmail.com>

Add support for the Anbernic RG35XX-2024.

This device is a handheld gaming console (series) based around the
Anbernic H700 SoC. It comes with 1GB of RAM and multiple face buttons
for input.

Add support for the simplest model for now, and then iterate later to
add board detection logic, support the entire device lineup, and
move to using the mainline device tree.

Changes since V1:
 - Removed DDR3 and LPDDR3 patches from Jernej Skrabec, as they could
   not be tested by me and were not required to bring up this device.
 - Changed the default TPR6 parameter based on a suggestion from
   Mikhail Kalashnikov.
 - Cherry picked 2 commits from linux-next and converted devicetree to
   upstream.

Chris Morgan (4):
  arm64: dts: allwinner: h616: Add r_i2c pinctrl nodes
  sunxi: Correct TPR6 parameter for H616 DRAM driver
  arm64: dts: allwinner: h616: Change RG35XX Series from r_rsb to r_i2c
  sunxi: Add support for Anbernic RG35XX-2024

Jernej Skrabec (5):
  sunxi: H616: dram: LPDDR4: adjust settings
  sunxi: H616: DRAM: Add alternative pin mapping
  sunxi: H616: DRAM: Adjust configuration procedure
  sunxi: H616: DRAM: Adjust size scan procedure
  sunxi: H616: dram: Update mbus priorities

 arch/arm/mach-sunxi/Kconfig                   |   2 +-
 arch/arm/mach-sunxi/dram_sun50i_h616.c        | 174 ++++++++++++------
 .../dram_timings/h616_lpddr4_2133.c           |   2 +-
 board/sunxi/MAINTAINERS                       |   5 +
 configs/anbernic_rg35xx_h700_defconfig        |  52 ++++++
 .../src/arm64/allwinner/sun50i-h616.dtsi      |   2 +
 .../sun50i-h700-anbernic-rg35xx-2024.dts      |   6 +-
 7 files changed, 179 insertions(+), 64 deletions(-)
 create mode 100644 configs/anbernic_rg35xx_h700_defconfig