mbox series

[0/3] sunxi: add OrangePi Zero 3 board support

Message ID 20231114013106.31336-1-andre.przywara@arm.com
Headers show
Series sunxi: add OrangePi Zero 3 board support | expand

Message

Andre Przywara Nov. 14, 2023, 1:31 a.m. UTC 
The OrangePi Zero 3 is a small development board featuring the Allwinner
H618 SoC. Compared to its predecessor OrangePi Zero 2, the new board uses
LPDDR4 DRAM instead of DDR3 DRAM, and an X-Powers AXP313 PMIC instead of
the AXP305.
U-Boot gained support for both LPDDR4 DRAM and the new PMIC just
recently, so add a user for those features by adding a defconfig for the
new board.
To make this work, patch 1/3 introduces support for zBIT SPI NOR flash
chip, and patch 2/3 removes the default AXP305 PMIC selection when
compiling for H616 SoCs.
Patch 3/3 then adds the defconfig. The DT was already synced from the
Linux kernel repo a few weeks ago.

Cheers,
Andre

Andre Przywara (3):
  mtd: spi-nor: Add support for zBIT ZB25VQ128
  sunxi: H616: remove default AXP305 selection
  sunxi: H616: Add OrangePi Zero 3 board support

 arch/arm/dts/Makefile            |  1 +
 board/sunxi/MAINTAINERS          |  5 +++++
 configs/orangepi_zero2_defconfig |  1 +
 configs/orangepi_zero3_defconfig | 30 ++++++++++++++++++++++++++++++
 configs/x96_mate_defconfig       |  1 +
 drivers/mtd/spi/Kconfig          |  5 +++++
 drivers/mtd/spi/spi-nor-ids.c    |  5 +++++
 drivers/power/Kconfig            |  1 -
 8 files changed, 48 insertions(+), 1 deletion(-)
 create mode 100644 configs/orangepi_zero3_defconfig