mbox series

[v2,0/3] add optee support for broadcom NS3 soc

Message ID 20200524102419.5568-1-rayagonda.kokatanur@broadcom.com
Headers show
Series add optee support for broadcom NS3 soc | expand

Message

Rayagonda Kokatanur May 24, 2020, 10:24 a.m. UTC 
This is fourth patch set series prepared on top of third
patch set ("add FIT image support for broadcom NS3 soc").

This patch adds optee support.

Changes from v1:
 -Address review comments from Thomas Fitzsimmons,
  Expand the bnxt full form.

 -Address review comments from Simon Glass,
  Move c file from board/broadcom/bcmns3/chimp_optee.c to 
  drivers/tee/broadcom,
  Move header file from include/brcm/chimp.h to include/broadcom/chimp.h 

Vikas Gupta (3):
  board: ns3: add optee based bnxt fw load driver
  configs: ns3: enable tee and optee driver
  arm: dts: ns3: add optee node

 arch/arm/dts/ns3.dtsi              |   7 ++
 configs/bcm_ns3_defconfig          |   5 +-
 drivers/tee/Kconfig                |   1 +
 drivers/tee/Makefile               |   1 +
 drivers/tee/broadcom/Kconfig       |   7 ++
 drivers/tee/broadcom/Makefile      |   3 +
 drivers/tee/broadcom/chimp_optee.c | 154 +++++++++++++++++++++++++++++
 include/broadcom/chimp.h           |  40 ++++++++
 8 files changed, 217 insertions(+), 1 deletion(-)
 create mode 100644 drivers/tee/broadcom/Kconfig
 create mode 100644 drivers/tee/broadcom/Makefile
 create mode 100644 drivers/tee/broadcom/chimp_optee.c
 create mode 100644 include/broadcom/chimp.h