Series |
More support for Armada 37xx boards (for Turris Mox)
|
expand
-
[U-Boot,v2,00/20] More support for Armada 37xx boards (for Turris Mox)
-
[U-Boot,v2,01/20] phy: marvell: a3700: Change return type of macro MVEBU_REG
-
[U-Boot,v2,02/20] phy: marvell: a3700: Use reg_set16 instead of phy_write16
-
[U-Boot,v2,03/20] phy: marvell: a3700: Don't create functional macro for each register
-
[U-Boot,v2,04/20] phy: marvell: a3700: Use same timeout for all register polling
-
[U-Boot,v2,05/20] phy: marvell: a3700: Use (!ret) instead of (ret == 0)
-
[U-Boot,v2,06/20] phy: marvell: a3700: Use reg_set_indirect istead of 2 reg_sets
-
[U-Boot,v2,07/20] phy: marvell: a3700: Access USB3 register indirectly on lane 2
-
[U-Boot,v2,08/20] phy: marvell: a3700: Set USB3 RX wait depending on ref clock
-
[U-Boot,v2,09/20] phy: marvell: a3700: revise the USB3 comphy setting during power on
-
[U-Boot,v2,10/20] phy: marvell: mux: Support nontrivial node order in selector register
-
[U-Boot,v2,11/20] phy: marvell: a3700: Fix SGMII cfg and stat register addresses
-
[U-Boot,v2,12/20] phy: marvell: a3700: Use comphy_mux on Armada 37xx.
-
[U-Boot,v2,13/20] phy: marvell: a3700: Save/restore selector reg in SGMII init
-
[U-Boot,v2,14/20] driver: clk: Add support for clocks on Armada 37xx
-
[U-Boot,v2,15/20] spi: mvebu_a3700_spi: Use Armada 37xx clk driver for SPI clock frequency
-
[U-Boot,v2,16/20] clk: armada-37xx: Support soc_clk_dump
-
[U-Boot,v2,17/20] phy: marvell: core: Cosmetic fixes
-
[U-Boot,v2,18/20] net: mvneta: Fix fault when wrong device tree
-
[U-Boot,v2,19/20] watchdog: Add support for Armada 37xx CPU watchdog
-
[U-Boot,v2,20/20] arm64: mvebu: Add basic support for the Turris Mox board
|