mbox series

[U-Boot,v3,0/3] ARM: omap3: beagle, evm: synchronize common setup

Message ID 20180226235259.21413-1-woods.technical@gmail.com
Headers show
Series ARM: omap3: beagle, evm: synchronize common setup | expand

Message

Derald D. Woods Feb. 26, 2018, 11:52 p.m. UTC 
This short series is an attempt to make this set of boards use the same
default configuration items where possible. This was prompted by an
investigation into enabling SERIAL_SEARCH_ALL on omap3_evm. This feature
now works for omap3_evm after this series.

The series changes the default NAND layout of MTDPARTS_DEFAULT. More
detail is provided with the patches. As most things are configurable
now, this should not be an issue. I am trying to get simple defaults
that just boot and expose the common core features. This will make
future testing and maintenance a bit more predictable, as there will
be a very similar and comparable set of boards.

Derald D. Woods (3):
  ARM: omap3: beagle: Set 'mtdids' and 'mtdparts' in board file
  ARM: omap3: beagle: Enable DM_SERIAL, update distro usage and NAND
    layout
  ARM: omap3: evm: Sync with omap3_beagle configuration

 board/ti/beagle/beagle.c       |   8 ++
 configs/omap3_beagle_defconfig |  25 ++++-
 configs/omap3_evm_defconfig    |  21 ++--
 include/configs/omap3_beagle.h | 239 +++++++++++++++++++++++------------------
 include/configs/omap3_evm.h    |  71 ++++++------
 5 files changed, 212 insertions(+), 152 deletions(-)

--

v3:
- Leave environment in NAND

v2:
- update cover letter and remove 'RFC' from series
- rebase and test on recent master