Series |
phy: sunxi: Add Allwinner sun4i USB PHY
|
expand
-
[U-Boot,v4,00/34] phy: sunxi: Add Allwinner sun4i USB PHY
-
[U-Boot,v4,01/34] usb: sunxi: Simplify ccm reg base code
-
[U-Boot,v4,02/34] musb: sunxi: Add proper macros instead of numericals
-
[U-Boot,v4,03/34] musb: sunxi: Use simple way to fill musb_hdrc pdata
-
[U-Boot,v4,04/34] musb: sunxi: Add fifo config
-
[U-Boot,v4,05/34] sunxi: clock: Fix clock gating for H3/H5/A64
-
[U-Boot,v4,06/34] musb: sunxi: Add OTG device clkgate and reset for H3/H5
-
[U-Boot,v4,07/34] sunxi: clock: Fix OHCI clock gating for H3/H5
-
[U-Boot,v4,08/34] musb: sunxi: Add support for H3/H5A64
-
[U-Boot,v4,09/34] phy: Add Allwinner A64 USB PHY driver
-
[U-Boot,v4,10/34] phy: sun4i-usb: Add id_detect and vbus_detect ops
-
[U-Boot,v4,11/34] phy: sun4i-usb: Add H3/H5 PHY config
-
[U-Boot,v4,12/34] phy: sun4i-usb: Add V3S PHY config
-
[U-Boot,v4,13/34] phy: sun4i-usb: Add A83T USB PHY config
-
[U-Boot,v4,14/34] phy: sun4i-usb: Add A10/A13/A20 PHY config
-
[U-Boot,v4,15/34] phy: sun4i-usb: Add A31 PHY config
-
[U-Boot,v4,16/34] phy: sun4i-usb: Add A33 USB PHY config
-
[U-Boot,v4,17/34] phy: sun4i-usb: Add A23 USB PHY config
-
[U-Boot,v4,18/34] device-tree-bindings: phy: Sync sun4i-usb-phy bindings
-
[U-Boot,v4,19/34] board: sunxi: Use generic-phy for board_usb_cable_connected
-
[U-Boot,v4,20/34] phy: sun4i-usb: Add a sunxi specific function for setting squelch-detect
-
[U-Boot,v4,21/34] usb: sunxi: Switch to use generic-phy
-
[U-Boot,v4,22/34] sunxi: Drop legacy usb_phy.c
-
[U-Boot,v4,23/34] sunxi: h3: Sync OTG and HCI nodes from Linux DT
-
[U-Boot,v4,24/34] arm64: allwinner: a64: bananapi-m64: Sync usb_otg node from Linux
-
[U-Boot,v4,25/34] configs: bananapi-m64: Enable USB OTG peripheral mode
-
[U-Boot,v4,26/34] ARM: dts: sun8i: a83t: Sync usbphy node from Linux
-
[U-Boot,v4,27/34] arm64: allwinner: a64: bananapi-m64: Sync usb host nodes from Linux
-
[U-Boot,v4,28/34] ARM: dts: sun8i-h3: bananapi-m2-plus: Sync usb otg nodes from Linux
-
[U-Boot,v4,29/34] configs: bananapi-m2-plus: Enable USB OTG peripheral mode
-
[U-Boot,v4,30/34] arm64: allwinner: h5: orangepi-pc2: Order nodes in alphabetic
-
[U-Boot,v4,31/34] arm64: allwinner: h5: orangepi-pc2: Sync usb otg nodes from Linux
-
[U-Boot,v4,32/34] configs: orangepi-pc2: Enable USB OTG peripheral mode
-
[U-Boot,v4,33/34] arm64: allwinner: h5: orangepi-prime: Sync usb otg nodes from Linux
-
[U-Boot,v4,34/34] configs: orangepi-prime: Enable USB OTG peripheral mode
|