Message ID | 1511357151-3771-1-git-send-email-narmstrong@baylibre.com |
---|---|
Headers | show |
Series | Add support for Amlogic GXL Based SBCs | expand |
Hi Tom, Simon, Le 22/11/2017 14:25, Neil Armstrong a écrit : > This patchset aimed to add minimal support for the following Amlogic GXL SoC > based board: > - LibreTech-CC > - Khadas VIM > > The initial support is composed of : > - Minimal boot support with serial, MMC, Ethernet and SDCard > - Updated DTS from Linux 4.13.8 > > Commands to generate a valid binary are provided in the board README. > > A common Ethernet init function is introduced to avoid duplicating > the same hardware init code. > > The P212 and Odroid-C2 board are also converted to this common function > by this patchset. > > The following work will be pushed later on : > - Support for dynamic reading of DDR memory size from registers > - USB DWC3 Host Support with PHY support I'll try to address Simon's comments, but is it still possible to have this merged for v2018.01 ? For the next release cycle, I'll try to add a proper clock driver and have a look to binman for sure. Neil > > Changes since v1: > - Add common ethernet init function > - Switch P212 and Odroid-C2 to use this ethernet init function > - Fix typos in READMEs > - Drop #define CONFIG_CONS_INDEX > > Neil Armstrong (5): > ARM: arch-meson: add ethernet common init function > board: odroid-c2: use common ethernet init function > board: p212: use common ethernet init function > arm: Add LibreTech CC support based on Meson GXL family > arm: Add Khadas VIM support based on Meson GXL family > > arch/arm/dts/Makefile | 4 +- > arch/arm/dts/meson-gxl-s905x-khadas-vim.dts | 137 +++++++++++++++++++++ > arch/arm/dts/meson-gxl-s905x-libretech-cc.dts | 171 ++++++++++++++++++++++++++ > arch/arm/include/asm/arch-meson/eth.h | 15 +++ > arch/arm/mach-meson/Kconfig | 18 +++ > arch/arm/mach-meson/Makefile | 2 +- > arch/arm/mach-meson/eth.c | 53 ++++++++ > board/amlogic/khadas-vim/Kconfig | 12 ++ > board/amlogic/khadas-vim/MAINTAINERS | 6 + > board/amlogic/khadas-vim/Makefile | 8 ++ > board/amlogic/khadas-vim/README | 96 +++++++++++++++ > board/amlogic/khadas-vim/khadas-vim.c | 48 ++++++++ > board/amlogic/libretech-cc/Kconfig | 12 ++ > board/amlogic/libretech-cc/MAINTAINERS | 6 + > board/amlogic/libretech-cc/Makefile | 8 ++ > board/amlogic/libretech-cc/README | 96 +++++++++++++++ > board/amlogic/libretech-cc/libretech-cc.c | 52 ++++++++ > board/amlogic/odroid-c2/odroid-c2.c | 11 +- > board/amlogic/p212/p212.c | 14 +-- > configs/khadas-vim_defconfig | 35 ++++++ > configs/libretech-cc_defconfig | 35 ++++++ > include/configs/khadas-vim.h | 21 ++++ > include/configs/libretech-cc.h | 21 ++++ > 23 files changed, 858 insertions(+), 23 deletions(-) > create mode 100644 arch/arm/dts/meson-gxl-s905x-khadas-vim.dts > create mode 100644 arch/arm/dts/meson-gxl-s905x-libretech-cc.dts > create mode 100644 arch/arm/include/asm/arch-meson/eth.h > create mode 100644 arch/arm/mach-meson/eth.c > create mode 100644 board/amlogic/khadas-vim/Kconfig > create mode 100644 board/amlogic/khadas-vim/MAINTAINERS > create mode 100644 board/amlogic/khadas-vim/Makefile > create mode 100644 board/amlogic/khadas-vim/README > create mode 100644 board/amlogic/khadas-vim/khadas-vim.c > create mode 100644 board/amlogic/libretech-cc/Kconfig > create mode 100644 board/amlogic/libretech-cc/MAINTAINERS > create mode 100644 board/amlogic/libretech-cc/Makefile > create mode 100644 board/amlogic/libretech-cc/README > create mode 100644 board/amlogic/libretech-cc/libretech-cc.c > create mode 100644 configs/khadas-vim_defconfig > create mode 100644 configs/libretech-cc_defconfig > create mode 100644 include/configs/khadas-vim.h > create mode 100644 include/configs/libretech-cc.h >
Hi Neil, On 25 November 2017 at 02:48, Neil Armstrong <narmstrong@baylibre.com> wrote: > Hi Tom, Simon, > > Le 22/11/2017 14:25, Neil Armstrong a écrit : >> This patchset aimed to add minimal support for the following Amlogic GXL SoC >> based board: >> - LibreTech-CC >> - Khadas VIM >> >> The initial support is composed of : >> - Minimal boot support with serial, MMC, Ethernet and SDCard >> - Updated DTS from Linux 4.13.8 >> >> Commands to generate a valid binary are provided in the board README. >> >> A common Ethernet init function is introduced to avoid duplicating >> the same hardware init code. >> >> The P212 and Odroid-C2 board are also converted to this common function >> by this patchset. >> >> The following work will be pushed later on : >> - Support for dynamic reading of DDR memory size from registers >> - USB DWC3 Host Support with PHY support > > > I'll try to address Simon's comments, but is it still possible > to have this merged for v2018.01 ? > > For the next release cycle, I'll try to add a proper clock driver > and have a look to binman for sure. From my side this seems fine. Regards, Simon