| Message ID | 1511202738-17448-1-git-send-email-jagan@amarulasolutions.com |
|---|---|
| Headers | show |
| Series | i.MX6: engicam: Add SPL_OF_CONTROL support | expand |
On 20/11/2017 19:32, Jagan Teki wrote: > This series has fix for data abort[1] which is observed for pinctrl data > before reloaction, thanks Lokesh for the suggestions. > > Changes for v3: > - Add pinctrl data fix for 'data abort' issue > - Add proper mmc get env device support for imx6q boards > - Enabled falcon for icorem6_rqs Applied (whole series) to u-boot-imx, thanks ! Best regards, Stefano Babic > > Changes for v2: > - Fixed imx6ul build issue > - Add FDT support for mx6ul_14x14_evk > > [1] https://www.mail-archive.com/u-boot@lists.denx.de/msg267220.html > > Jagan Teki (9): > i.MX6: engicam: Move set_fdt_file to common > i.MX6Q: icorem6: Move spl load fit to common/spl > i.MX6Q: icore: Add SPL_OF_CONTROL support > pinctrl: imx6ul: Fix pinctrl data overlapped with DT area > i.MX6UL: icore: Add SPL_OF_CONTROL support > board: icore-rqs: Fix mmc get env device > i.MX6: engicam: Add imx6q/imx6ul boards for existing boards > engicam: imx6q: Return mmc dev 0 for icore > configs: icore-rqs: Enable falcon mode > > arch/arm/dts/imx6qdl-icore-rqs.dtsi | 7 + > arch/arm/dts/imx6qdl-icore.dtsi | 2 + > arch/arm/dts/imx6qdl.dtsi | 5 + > arch/arm/dts/imx6ul-geam-kit.dts | 4 + > arch/arm/dts/imx6ul-isiot-emmc.dts | 2 + > arch/arm/dts/imx6ul-isiot.dtsi | 2 + > arch/arm/dts/imx6ul.dtsi | 6 + > arch/arm/mach-imx/mx6/Kconfig | 49 ++--- > board/engicam/common/board.c | 24 ++ > board/engicam/common/board.h | 1 - > board/engicam/common/spl.c | 42 ++++ > board/engicam/geam6ul/MAINTAINERS | 8 - > board/engicam/geam6ul/README | 28 --- > board/engicam/icorem6_rqs/Kconfig | 12 - > board/engicam/icorem6_rqs/MAINTAINERS | 9 - > board/engicam/icorem6_rqs/Makefile | 6 - > board/engicam/icorem6_rqs/icorem6_rqs.c | 124 +---------- > board/engicam/{geam6ul => imx6q}/Kconfig | 4 +- > board/engicam/{icorem6 => imx6q}/MAINTAINERS | 8 +- > board/engicam/{geam6ul => imx6q}/Makefile | 2 +- > board/engicam/{icorem6_rqs => imx6q}/README | 9 +- > board/engicam/{icorem6/icorem6.c => imx6q/imx6q.c} | 98 +-------- > board/engicam/{icorem6 => imx6ul}/Kconfig | 4 +- > board/engicam/{isiotmx6ul => imx6ul}/MAINTAINERS | 9 +- > board/engicam/{icorem6 => imx6ul}/Makefile | 2 +- > board/engicam/{icorem6 => imx6ul}/README | 11 +- > .../engicam/{geam6ul/geam6ul.c => imx6ul/imx6ul.c} | 88 +------- > board/engicam/isiotmx6ul/Kconfig | 12 - > board/engicam/isiotmx6ul/Makefile | 6 - > board/engicam/isiotmx6ul/README | 28 --- > board/engicam/isiotmx6ul/isiotmx6ul.c | 241 --------------------- > configs/imx6qdl_icore_mmc_defconfig | 3 +- > configs/imx6qdl_icore_nand_defconfig | 2 +- > configs/imx6qdl_icore_rqs_defconfig | 4 +- > configs/imx6ul_geam_mmc_defconfig | 3 +- > configs/imx6ul_geam_nand_defconfig | 2 +- > configs/imx6ul_isiot_emmc_defconfig | 3 +- > configs/imx6ul_isiot_mmc_defconfig | 3 +- > configs/imx6ul_isiot_nand_defconfig | 2 +- > drivers/pinctrl/nxp/pinctrl-imx6.c | 7 +- > include/configs/imx6-engicam.h | 11 - > 41 files changed, 170 insertions(+), 723 deletions(-) > delete mode 100644 board/engicam/geam6ul/MAINTAINERS > delete mode 100644 board/engicam/geam6ul/README > delete mode 100644 board/engicam/icorem6_rqs/Kconfig > delete mode 100644 board/engicam/icorem6_rqs/MAINTAINERS > delete mode 100644 board/engicam/icorem6_rqs/Makefile > rename board/engicam/{geam6ul => imx6q}/Kconfig (73%) > rename board/engicam/{icorem6 => imx6q}/MAINTAINERS (58%) > rename board/engicam/{geam6ul => imx6q}/Makefile (80%) > rename board/engicam/{icorem6_rqs => imx6q}/README (71%) > rename board/engicam/{icorem6/icorem6.c => imx6q/imx6q.c} (72%) > rename board/engicam/{icorem6 => imx6ul}/Kconfig (72%) > rename board/engicam/{isiotmx6ul => imx6ul}/MAINTAINERS (69%) > rename board/engicam/{icorem6 => imx6ul}/Makefile (80%) > rename board/engicam/{icorem6 => imx6ul}/README (74%) > rename board/engicam/{geam6ul/geam6ul.c => imx6ul/imx6ul.c} (59%) > delete mode 100644 board/engicam/isiotmx6ul/Kconfig > delete mode 100644 board/engicam/isiotmx6ul/Makefile > delete mode 100644 board/engicam/isiotmx6ul/README > delete mode 100644 board/engicam/isiotmx6ul/isiotmx6ul.c >
This series has fix for data abort[1] which is observed for pinctrl data before reloaction, thanks Lokesh for the suggestions. Changes for v3: - Add pinctrl data fix for 'data abort' issue - Add proper mmc get env device support for imx6q boards - Enabled falcon for icorem6_rqs Changes for v2: - Fixed imx6ul build issue - Add FDT support for mx6ul_14x14_evk [1] https://www.mail-archive.com/u-boot@lists.denx.de/msg267220.html Jagan Teki (9): i.MX6: engicam: Move set_fdt_file to common i.MX6Q: icorem6: Move spl load fit to common/spl i.MX6Q: icore: Add SPL_OF_CONTROL support pinctrl: imx6ul: Fix pinctrl data overlapped with DT area i.MX6UL: icore: Add SPL_OF_CONTROL support board: icore-rqs: Fix mmc get env device i.MX6: engicam: Add imx6q/imx6ul boards for existing boards engicam: imx6q: Return mmc dev 0 for icore configs: icore-rqs: Enable falcon mode arch/arm/dts/imx6qdl-icore-rqs.dtsi | 7 + arch/arm/dts/imx6qdl-icore.dtsi | 2 + arch/arm/dts/imx6qdl.dtsi | 5 + arch/arm/dts/imx6ul-geam-kit.dts | 4 + arch/arm/dts/imx6ul-isiot-emmc.dts | 2 + arch/arm/dts/imx6ul-isiot.dtsi | 2 + arch/arm/dts/imx6ul.dtsi | 6 + arch/arm/mach-imx/mx6/Kconfig | 49 ++--- board/engicam/common/board.c | 24 ++ board/engicam/common/board.h | 1 - board/engicam/common/spl.c | 42 ++++ board/engicam/geam6ul/MAINTAINERS | 8 - board/engicam/geam6ul/README | 28 --- board/engicam/icorem6_rqs/Kconfig | 12 - board/engicam/icorem6_rqs/MAINTAINERS | 9 - board/engicam/icorem6_rqs/Makefile | 6 - board/engicam/icorem6_rqs/icorem6_rqs.c | 124 +---------- board/engicam/{geam6ul => imx6q}/Kconfig | 4 +- board/engicam/{icorem6 => imx6q}/MAINTAINERS | 8 +- board/engicam/{geam6ul => imx6q}/Makefile | 2 +- board/engicam/{icorem6_rqs => imx6q}/README | 9 +- board/engicam/{icorem6/icorem6.c => imx6q/imx6q.c} | 98 +-------- board/engicam/{icorem6 => imx6ul}/Kconfig | 4 +- board/engicam/{isiotmx6ul => imx6ul}/MAINTAINERS | 9 +- board/engicam/{icorem6 => imx6ul}/Makefile | 2 +- board/engicam/{icorem6 => imx6ul}/README | 11 +- .../engicam/{geam6ul/geam6ul.c => imx6ul/imx6ul.c} | 88 +------- board/engicam/isiotmx6ul/Kconfig | 12 - board/engicam/isiotmx6ul/Makefile | 6 - board/engicam/isiotmx6ul/README | 28 --- board/engicam/isiotmx6ul/isiotmx6ul.c | 241 --------------------- configs/imx6qdl_icore_mmc_defconfig | 3 +- configs/imx6qdl_icore_nand_defconfig | 2 +- configs/imx6qdl_icore_rqs_defconfig | 4 +- configs/imx6ul_geam_mmc_defconfig | 3 +- configs/imx6ul_geam_nand_defconfig | 2 +- configs/imx6ul_isiot_emmc_defconfig | 3 +- configs/imx6ul_isiot_mmc_defconfig | 3 +- configs/imx6ul_isiot_nand_defconfig | 2 +- drivers/pinctrl/nxp/pinctrl-imx6.c | 7 +- include/configs/imx6-engicam.h | 11 - 41 files changed, 170 insertions(+), 723 deletions(-) delete mode 100644 board/engicam/geam6ul/MAINTAINERS delete mode 100644 board/engicam/geam6ul/README delete mode 100644 board/engicam/icorem6_rqs/Kconfig delete mode 100644 board/engicam/icorem6_rqs/MAINTAINERS delete mode 100644 board/engicam/icorem6_rqs/Makefile rename board/engicam/{geam6ul => imx6q}/Kconfig (73%) rename board/engicam/{icorem6 => imx6q}/MAINTAINERS (58%) rename board/engicam/{geam6ul => imx6q}/Makefile (80%) rename board/engicam/{icorem6_rqs => imx6q}/README (71%) rename board/engicam/{icorem6/icorem6.c => imx6q/imx6q.c} (72%) rename board/engicam/{icorem6 => imx6ul}/Kconfig (72%) rename board/engicam/{isiotmx6ul => imx6ul}/MAINTAINERS (69%) rename board/engicam/{icorem6 => imx6ul}/Makefile (80%) rename board/engicam/{icorem6 => imx6ul}/README (74%) rename board/engicam/{geam6ul/geam6ul.c => imx6ul/imx6ul.c} (59%) delete mode 100644 board/engicam/isiotmx6ul/Kconfig delete mode 100644 board/engicam/isiotmx6ul/Makefile delete mode 100644 board/engicam/isiotmx6ul/README delete mode 100644 board/engicam/isiotmx6ul/isiotmx6ul.c