@@ -20,6 +20,7 @@
#include <opal.h>
#include <opal-msg.h>
#include <device.h>
+#include <libfdt/libfdt.h>
#include <libflash/libflash.h>
#include <libflash/libffs.h>
#include <libflash/blocklevel.h>
@@ -27,6 +28,9 @@
#include <libstb/stb.h>
#include <libstb/container.h>
#include <elf.h>
+#include <timebase.h>
+#include <libxz/xz.h>
+#include <string.h>
struct flash {
struct list_node list;
@@ -612,7 +616,11 @@ static int flash_load_resource(enum resource_id id, uint32_t subid,
if (!content_size) {
prerror("FLASH: Invalid ELF header part %s\n",
name);
- goto out_free_ffs;
+ /* Check for DT header */
+ if (!fdt_check_header(buf))
+ content_size = fdt_totalsize(buf);
+ else
+ goto out_free_ffs;
}
prlog(PR_DEBUG, "FLASH: computed %s size %u\n",
name, content_size);
@@ -790,3 +798,150 @@ int flash_start_preload_resource(enum resource_id id, uint32_t subid,
return OPAL_SUCCESS;
}
+
+struct boot_resources *boot_res;
+static struct dt_node *uImg_root;
+static size_t initramfs_uncomp_size = 0;
+static struct cpu_job *flash_load_res_job = NULL;
+
+/*
+ * setup_boot_resource_dt parses the device-tree and configures the locations
+ * of the boot resources.
+ * The default configuration will be used. If there is no default property,
+ * we take the first configuration.
+ */
+static void setup_boot_resource_dt(void)
+{
+ const struct dt_property *def_conf, *kname, *rname, *kdata, *rdata, *usize;
+ char *kernel_name, *ramdisk_name, *end;
+ struct dt_node *node;
+
+ /* Find configuration node*/
+ node = dt_find_by_name(uImg_root, "configurations");
+
+ if (!node) {
+ prlog(PR_PRINTF, "FLASH: FDT configurations node not found\n");
+ return;
+ }
+
+ /* Find default config property */
+ def_conf = dt_find_property(node, "default");
+
+ if (!def_conf) {
+ /* If no default node, take first config child node as default */
+ node = dt_first(node);
+ if (!node) {
+ prlog(PR_PRINTF, "FLASH: FDT has empty configuration list\n");
+ return;
+ }
+ }
+ else {
+ /* Get node for config based on default value */
+ node = dt_find_by_name(node, def_conf->prop);
+ }
+
+
+ /* Find corresponding kernel and ramdisk names for the config */
+ kname = dt_find_property(node, "kernel");
+ kernel_name = (char *)kname->prop;
+
+ rname = dt_find_property(node, "ramdisk");
+ ramdisk_name = (char *)rname->prop;
+
+ /* Setup kernel location */
+ node = dt_find_by_name(uImg_root, kernel_name);
+ kdata = dt_find_property(node, "data");
+ if (kdata) {
+ boot_res->kernel_size = kdata->len;
+ boot_res->kernel_base = (void *)&kdata->prop;
+ }
+
+
+ /* Setup initramfs location */
+ node = dt_find_by_name(uImg_root, ramdisk_name);
+ rdata = dt_find_property(node, "data");
+ if (rdata) {
+ boot_res->initramfs_size = rdata->len;
+ boot_res->initramfs_base = (void *)&rdata->prop;
+ boot_res->initramfs_loaded = true;
+ }
+
+ /* Setup uncompressed size of the initramfs (optional property) */
+ usize = dt_find_property(node, "uncompressed_size");
+ if (usize)
+ initramfs_uncomp_size = strtol(usize->prop, &end, 10);
+}
+
+/*
+ * flash_setup_boot_resources is used to setup the location of the boot
+ * resources and decode the initramfs.
+ * The information is passed through a FDT in the BOOTKERNEL partition.
+ * This method is only used on BMC machines.
+ */
+static void flash_setup_boot_resource(void *data __unused)
+{
+ int loaded, waited, r;
+ void *buf;
+ size_t len;
+ char *strt;
+
+ waited = 0;
+
+ /* Wait for the kernel to be loaded */
+ do {
+ opal_run_pollers();
+ r = flash_resource_loaded(RESOURCE_ID_KERNEL, RESOURCE_SUBID_NONE);
+ time_wait_ms_nopoll(5);
+ if (r != OPAL_BUSY)
+ break;
+ time_wait_ms_nopoll(5);
+ waited += 10;
+
+ }
+ while (r == OPAL_BUSY);
+
+ boot_res->kernel_loaded = true;
+
+ strt = (char *)boot_res->kernel_base;
+
+ prlog(PR_PRINTF, "FLASH: waited %u ms for kernel\n", waited);
+
+ /* Setup kernel and initramfs FDT */
+ uImg_root = dt_new_root("uImage");
+ loaded = dt_expand_node(uImg_root, boot_res->kernel_base, 0);
+
+ if (loaded < 0)
+ return;
+
+ setup_boot_resource_dt();
+
+ /* Now the resources have been setup, try and decode the initramfs */
+ buf = boot_res->initramfs_base;
+ len = boot_res->initramfs_size;
+
+ r = decode_resource_xz(&buf, &len, &initramfs_uncomp_size);
+
+ if (r == XZ_STREAM_END) {
+ /* Set new initramfs location */
+ boot_res->initramfs_base = buf;
+ boot_res->initramfs_size = len;
+ }
+
+ boot_res->success = true;
+
+ return;
+}
+
+struct cpu_job* flash_load_boot_resource(struct boot_resources *r)
+{
+ boot_res = r;
+ if (flash_load_res_job)
+ cpu_wait_job(flash_load_res_job, true);
+
+ flash_load_res_job = cpu_queue_job(NULL, "flash_setup_boot_resource",
+ flash_setup_boot_resource, NULL);
+
+ cpu_process_local_jobs();
+
+ return flash_load_res_job;
+}
@@ -236,6 +236,9 @@ extern int flash_start_preload_resource(enum resource_id id, uint32_t subid,
extern int flash_resource_loaded(enum resource_id id, uint32_t idx);
extern bool flash_reserve(void);
extern void flash_release(void);
+
+extern struct cpu_job* flash_load_boot_resource(struct boot_resources *r);
+
#define FLASH_SUBPART_ALIGNMENT 0x1000
#define FLASH_SUBPART_HEADER_SIZE FLASH_SUBPART_ALIGNMENT
extern int flash_subpart_info(void *part_header, uint32_t header_len,
This patch adds the ability for openpower machines to decode the payloads initramfs before the kernel requires it. Allowing petitboot to boot faster. Openpower machines use zImage files for the payload. This contains the kernel, with the initramfs baked into the file. There is not way to determine the location of the initramfs this way. In order to do the asyncronous decoding on openpower, the payload must be packaged as a Flattened Image Tree (FIT). This is similar to a standard DT, but contains the kernel and initramfs images. This allows us to locate the initramfs and decode it before the kernel requires it. This gives similar performance benefits to the FSP case, saving around 2.7 seconds during the boot process. To create the FIT file we use the `mkimage` tool. You can find documentation on FIT files and how to create them on from the u-boot repository. (Under /doc/uImage.FIT/) Signed-off-by: Matt Brown <matthew.brown.dev@gmail.com> --- core/flash.c | 157 +++++++++++++++++++++++++++++++++++++++++++++++++++++- include/skiboot.h | 3 ++ 2 files changed, 159 insertions(+), 1 deletion(-)