@@ -20,87 +20,80 @@
#include <skiboot.h>
#include <string.h>
-#define IPMI_WRITE_SENSOR (1 << 1)
-#define IPMI_SET_ASSERTION (1 << 5)
-#define IPMI_ASSERTION_STATE(state) (1 << state)
+#define IPMI_WRITE_SENSOR (1 << 0)
+#define IPMI_WRITE_EVENT_BYTES (1 << 7)
+#define IPMI_SET_ASSERTION (1 << 4)
#define FW_PROGRESS_SENSOR_TYPE 0x0F
-#define BOOT_COUNT_SENSOR_TYPE 0xAA
+#define BOOT_COUNT_SENSOR_TYPE 0xC3
-/* Ghetto. TODO: Do something smarter */
-int16_t sensors[255];
+static int16_t sensors[255];
struct set_sensor_req {
- u8 sensor;
- u8 operation;
- u8 reading[8];
+ u8 sensor_number;
+ u8 operation;
+ u8 sensor_reading;
+ u8 assertion_mask[2];
+ u8 deassertion_mask[2];
+ u8 event_data[3];
};
int ipmi_set_boot_count(void)
{
struct set_sensor_req req;
struct ipmi_msg *msg;
- int sensor_id;
+ int boot_count_sensor = sensors[BOOT_COUNT_SENSOR_TYPE];
- sensor_id = sensors[BOOT_COUNT_SENSOR_TYPE];
- if (sensor_id < 0) {
- prlog(PR_DEBUG, "SENSOR: boot count set but not present\n");
- return OPAL_HARDWARE;
+ if (!ipmi_present())
+ return OPAL_CLOSED;
+
+ if (boot_count_sensor < 0) {
+ prlog(PR_DEBUG, "IPMI: boot count set but not present\n");
+ return OPAL_HARDWARE;
}
memset(&req, 0, sizeof(req));
- req.sensor = sensor_id;
- /* Set assertion bit */
- req.operation = IPMI_SET_ASSERTION;
- /* Set state 2 */
- req.reading[1] = IPMI_ASSERTION_STATE(2);
+ req.sensor_number = boot_count_sensor;
+ req.operation = IPMI_WRITE_SENSOR;
+ req.sensor_reading = 0x00;
+ req.assertion_mask[0] = 0x02;
- /* We just need the first 4 bytes */
- msg = ipmi_mkmsg_simple(IPMI_SET_SENSOR_READING, &req, 4);
+ msg = ipmi_mkmsg_simple(IPMI_SET_SENSOR_READING, &req, sizeof(req));
if (!msg)
return OPAL_HARDWARE;
+ printf("IPMI: Resetting boot count on successful boot\n");
+
return ipmi_queue_msg(msg);
}
int ipmi_set_fw_progress_sensor(uint8_t state)
{
- int fw_sensor_id = sensors[FW_PROGRESS_SENSOR_TYPE];
-
- if (fw_sensor_id < 0) {
- prlog(PR_DEBUG, "SENSOR: fw progress set but not present\n");
- return OPAL_HARDWARE;
- }
-
- return ipmi_set_sensor(fw_sensor_id, &state, sizeof(state));
-}
-
-int ipmi_set_sensor(uint8_t sensor, uint8_t *reading, size_t len)
-{
struct ipmi_msg *msg;
struct set_sensor_req request;
+ int fw_sensor_num = sensors[FW_PROGRESS_SENSOR_TYPE];
if (!ipmi_present())
return OPAL_CLOSED;
- if (len > 8) {
- prlog(PR_ERR, "IPMI: sensor setting length %zd invalid\n",
- len);
- return OPAL_PARAMETER;
+ if (fw_sensor_num < 0) {
+ prlog(PR_DEBUG, "IPMI: fw progress set but not present\n");
+ return OPAL_HARDWARE;
}
memset(&request, 0, sizeof(request));
- request.sensor = sensor;
- request.operation = IPMI_WRITE_SENSOR;
- memcpy(request.reading, reading, len);
+ request.sensor_number = fw_sensor_num;
+ request.operation = IPMI_WRITE_EVENT_BYTES;
+ request.assertion_mask[0] = 0x02; /* Firmware progress offset */
+ request.event_data[1] = state;
- prlog(PR_INFO, "IPMI: setting sensor %02x to %02x ...\n",
- request.sensor, request.reading[0]);
+ prlog(PR_INFO, "IPMI: fw progress sensor (%02x) to %02x ...\n",
+ request.sensor_number, request.event_data[1]);
- /* Send the minimial length message: header plus the reading bytes */
- msg = ipmi_mkmsg_simple(IPMI_SET_SENSOR_READING, &request, len + 2);
+ msg = ipmi_mkmsg_simple(IPMI_SET_SENSOR_READING, &request,
+ sizeof(request));
if (!msg)
return OPAL_HARDWARE;
This is an attempt to make it clearer how to use the sensor set ipmi command, and to do the correct thing to our BMC. The boot count was using the incorrect set mask and type. It now confirms to what the AMI BMC expects. Signed-off-by: Joel Stanley <joel@jms.id.au> --- hw/ipmi/ipmi-sensor.c | 81 +++++++++++++++++++++++---------------------------- 1 file changed, 37 insertions(+), 44 deletions(-)