diff mbox series

[2/3] rtc: abx80x: Add utility function for writing configuration key

Message ID 20200612223551.282113-2-kevin+linux@km6g.us
State Superseded
Headers show
Series [1/3,v2] dt-bindings: abx80x: Add autocal-filter property | expand

Commit Message

Kevin P. Fleming June 12, 2020, 10:35 p.m. UTC
Writing one of key two values into the configuration key register
is a common operation, so a utility function has been added to
provide consistent behavior and eliminate code duplication.

Signed-off-by: Kevin P. Fleming <kevin+linux@km6g.us>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: linux-rtc@vger.kernel.org
---
 drivers/rtc/rtc-abx80x.c | 39 ++++++++++++++++-----------------------
 1 file changed, 16 insertions(+), 23 deletions(-)
diff mbox series

Patch

diff --git a/drivers/rtc/rtc-abx80x.c b/drivers/rtc/rtc-abx80x.c
index 803725b3a02c3..daa6f27040e61 100644
--- a/drivers/rtc/rtc-abx80x.c
+++ b/drivers/rtc/rtc-abx80x.c
@@ -117,6 +117,16 @@  struct abx80x_priv {
 	struct watchdog_device wdog;
 };
 
+static int abx80x_write_config_key(struct i2c_client *client, u8 key)
+{
+	if (i2c_smbus_write_byte_data(client, ABX8XX_REG_CFG_KEY, key) < 0) {
+		dev_err(&client->dev, "Unable to write configuration key\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
 static int abx80x_is_rc_mode(struct i2c_client *client)
 {
 	int flags = 0;
@@ -140,12 +150,8 @@  static int abx80x_enable_trickle_charger(struct i2c_client *client,
 	 * Write the configuration key register to enable access to the Trickle
 	 * register
 	 */
-	err = i2c_smbus_write_byte_data(client, ABX8XX_REG_CFG_KEY,
-					ABX8XX_CFG_KEY_MISC);
-	if (err < 0) {
-		dev_err(&client->dev, "Unable to write configuration key\n");
+	if (abx80x_write_config_key(client, ABX8XX_CFG_KEY_MISC) < 0)
 		return -EIO;
-	}
 
 	err = i2c_smbus_write_byte_data(client, ABX8XX_REG_TRICKLE,
 					ABX8XX_TRICKLE_CHARGE_ENABLE |
@@ -358,12 +364,8 @@  static int abx80x_rtc_set_autocalibration(struct device *dev,
 	}
 
 	/* Unlock write access to Oscillator Control Register */
-	retval = i2c_smbus_write_byte_data(client, ABX8XX_REG_CFG_KEY,
-					   ABX8XX_CFG_KEY_OSC);
-	if (retval < 0) {
-		dev_err(dev, "Failed to write CONFIG_KEY register\n");
-		return retval;
-	}
+	if (abx80x_write_config_key(client, ABX8XX_CFG_KEY_OSC) < 0)
+		return -EIO;
 
 	retval = i2c_smbus_write_byte_data(client, ABX8XX_REG_OSC, flags);
 
@@ -450,12 +452,8 @@  static ssize_t oscillator_store(struct device *dev,
 		flags |= (ABX8XX_OSC_OSEL);
 
 	/* Unlock write access on Oscillator Control register */
-	retval = i2c_smbus_write_byte_data(client, ABX8XX_REG_CFG_KEY,
-					   ABX8XX_CFG_KEY_OSC);
-	if (retval < 0) {
-		dev_err(dev, "Failed to write CONFIG_KEY register\n");
-		return retval;
-	}
+	if (abx80x_write_config_key(client, ABX8XX_CFG_KEY_OSC) < 0)
+		return -EIO;
 
 	retval = i2c_smbus_write_byte_data(client, ABX8XX_REG_OSC, flags);
 	if (retval < 0) {
@@ -762,13 +760,8 @@  static int abx80x_probe(struct i2c_client *client,
 		 * Write the configuration key register to enable access to
 		 * the config2 register
 		 */
-		err = i2c_smbus_write_byte_data(client, ABX8XX_REG_CFG_KEY,
-						ABX8XX_CFG_KEY_MISC);
-		if (err < 0) {
-			dev_err(&client->dev,
-				"Unable to write configuration key\n");
+		if (abx80x_write_config_key(client, ABX8XX_CFG_KEY_MISC) < 0)
 			return -EIO;
-		}
 
 		err = i2c_smbus_write_byte_data(client, ABX8XX_REG_OUT_CTRL,
 						data | ABX8XX_OUT_CTRL_EXDS);