@@ -114,14 +114,15 @@ enum ds_type {
# define RX8025_BIT_VDET 0x40
# define RX8025_BIT_XST 0x20
-#define RX8130_REG_ALARM_MIN 0x07
-#define RX8130_REG_ALARM_HOUR 0x08
-#define RX8130_REG_ALARM_WEEK_OR_DAY 0x09
-#define RX8130_REG_EXTENSION 0x0c
+#define RX8130_REG_ALARM_MIN 0x17
+#define RX8130_REG_ALARM_HOUR 0x18
+#define RX8130_REG_ALARM_WEEK_OR_DAY 0x19
+#define RX8130_REG_EXTENSION 0x1c
#define RX8130_REG_EXTENSION_WADA BIT(3)
-#define RX8130_REG_FLAG 0x0d
+#define RX8130_REG_FLAG 0x1d
+#define RX8130_REG_FLAG_VLF BIT(1)
#define RX8130_REG_FLAG_AF BIT(3)
-#define RX8130_REG_CONTROL0 0x0e
+#define RX8130_REG_CONTROL0 0x1e
#define RX8130_REG_CONTROL0_AIE BIT(3)
#define MCP794XX_REG_CONTROL 0x07
While rx8130 has a register offset of 0x10 in its chip_desc, this isn't used when regmap accesses are done. So add 0x10 to access the right locations. Fixes: ee0981be7704 ("rtc: ds1307: Add support for Epson RX8130CE") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> --- drivers/rtc/rtc-ds1307.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-)