Message ID | 1427189140-1935-6-git-send-email-lee.jones@linaro.org |
---|---|
State | Accepted |
Headers | show |
On 03/24/2015 02:25 AM, Lee Jones wrote: > On current ST platforms the LPC controls a number of functions including > Watchdog and Real Time Clock. This patch provides the bindings used to > configure LPC in Watchdog mode. > > Signed-off-by: Lee Jones <lee.jones@linaro.org> > --- > .../devicetree/bindings/watchdog/st_lpc_wdt.txt | 38 ++++++++++++++++++++++ > 1 file changed, 38 insertions(+) > create mode 100644 Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt > > diff --git a/Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt b/Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt > new file mode 100644 > index 0000000..1bdf023 > --- /dev/null > +++ b/Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt > @@ -0,0 +1,38 @@ > +STMicroelectronics Low Power Controller (LPC) - Watchdog > +======================================================== > + > +LPC currently supports Watchdog OR Real Time Clock functionality. > + > +[See: ../rtc/rtc-st-lpc.txt for RTC options] > + > +Required properties > + > +- compatible : Must be one of: "st,stih407-lpc" "st,stih416-lpc" > + "st,stih415-lpc" "st,stid127-lpc" > +- reg : LPC registers base address + size > +- interrupts : LPC interrupt line number and associated flags > +- clocks : Clock used by LPC device (See: ../clock/clock-bindings.txt) > +- st,lpc-mode : The LPC can run either one of two modes ST_LPC_MODE_RTC [0] or > + ST_LPC_MODE_WDT [1]. One (and only one) mode must be > + selected. > + > +Required properties [watchdog mode] > + > +- st,syscfg : Phandle to syscfg node used to enable watchdog and configure > + CPU reset type. > +- timeout-sec : Watchdog timeout in seconds > + > +Optional properties [watchdog mode] > + > +- st,warm-reset : If present reset type will be 'warm' - if not it will be cold > + > +Example: > + lpc@fde05000 { > + compatible = "st,stih416-lpc-watchdog"; Hi Lee, Just noticed: That doesn't match the above description, nor the match statement in the drivers. Guenter > + reg = <0xfde05000 0x1000>; > + clocks = <&clk_s_d3_flexgen CLK_LPC_0>; > + st,syscfg = <&syscfg_core>; > + timeout-sec = <120>; > + st,lpc-mode = <ST_LPC_MODE_WDT>; > + st,warm-reset; > + }; >
diff --git a/Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt b/Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt new file mode 100644 index 0000000..1bdf023 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt @@ -0,0 +1,38 @@ +STMicroelectronics Low Power Controller (LPC) - Watchdog +======================================================== + +LPC currently supports Watchdog OR Real Time Clock functionality. + +[See: ../rtc/rtc-st-lpc.txt for RTC options] + +Required properties + +- compatible : Must be one of: "st,stih407-lpc" "st,stih416-lpc" + "st,stih415-lpc" "st,stid127-lpc" +- reg : LPC registers base address + size +- interrupts : LPC interrupt line number and associated flags +- clocks : Clock used by LPC device (See: ../clock/clock-bindings.txt) +- st,lpc-mode : The LPC can run either one of two modes ST_LPC_MODE_RTC [0] or + ST_LPC_MODE_WDT [1]. One (and only one) mode must be + selected. + +Required properties [watchdog mode] + +- st,syscfg : Phandle to syscfg node used to enable watchdog and configure + CPU reset type. +- timeout-sec : Watchdog timeout in seconds + +Optional properties [watchdog mode] + +- st,warm-reset : If present reset type will be 'warm' - if not it will be cold + +Example: + lpc@fde05000 { + compatible = "st,stih416-lpc-watchdog"; + reg = <0xfde05000 0x1000>; + clocks = <&clk_s_d3_flexgen CLK_LPC_0>; + st,syscfg = <&syscfg_core>; + timeout-sec = <120>; + st,lpc-mode = <ST_LPC_MODE_WDT>; + st,warm-reset; + };
On current ST platforms the LPC controls a number of functions including Watchdog and Real Time Clock. This patch provides the bindings used to configure LPC in Watchdog mode. Signed-off-by: Lee Jones <lee.jones@linaro.org> --- .../devicetree/bindings/watchdog/st_lpc_wdt.txt | 38 ++++++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt