new file mode 100644
@@ -0,0 +1,32 @@
+/*
+ * QEMU PowerPC N1 chiplet model
+ *
+ * Copyright (c) 2023, IBM Corporation.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#ifndef PPC_PNV_N1_CHIPLET_H
+#define PPC_PNV_N1_CHIPLET_H
+
+#include "hw/ppc/pnv_nest_pervasive.h"
+
+#define TYPE_PNV_N1_CHIPLET "pnv-N1-chiplet"
+#define PNV_N1_CHIPLET(obj) OBJECT_CHECK(PnvN1Chiplet, (obj), TYPE_PNV_N1_CHIPLET)
+
+typedef struct PnvPbScom {
+ uint64_t mode;
+ uint64_t hp_mode2_curr;
+} PnvPbScom;
+
+typedef struct PnvN1Chiplet {
+ DeviceState parent;
+ MemoryRegion xscom_pb_eq_mr;
+ MemoryRegion xscom_pb_es_mr;
+ PnvNestChipletPervasive nest_pervasive; /* common pervasive chiplet unit */
+#define PNV_PB_SCOM_EQ_SIZE 8
+ PnvPbScom eq[PNV_PB_SCOM_EQ_SIZE];
+#define PNV_PB_SCOM_ES_SIZE 4
+ PnvPbScom es[PNV_PB_SCOM_ES_SIZE];
+} PnvN1Chiplet;
+#endif /*PPC_PNV_N1_CHIPLET_H */
@@ -173,6 +173,12 @@ struct PnvXScomInterfaceClass {
#define PNV10_XSCOM_N1_CHIPLET_CTRL_REGS_BASE 0x3000000
#define PNV10_XSCOM_CHIPLET_CTRL_REGS_SIZE 0x400
+#define PNV10_XSCOM_N1_PB_SCOM_EQ_BASE 0x3011000
+#define PNV10_XSCOM_N1_PB_SCOM_EQ_SIZE 0x200
+
+#define PNV10_XSCOM_N1_PB_SCOM_ES_BASE 0x3011300
+#define PNV10_XSCOM_N1_PB_SCOM_ES_SIZE 0x100
+
#define PNV10_XSCOM_PEC_NEST_BASE 0x3011800 /* index goes downwards ... */
#define PNV10_XSCOM_PEC_NEST_SIZE 0x100
new file mode 100644
@@ -0,0 +1,173 @@
+/*
+ * QEMU PowerPC N1 chiplet model
+ *
+ * Copyright (c) 2023, IBM Corporation.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "hw/qdev-properties.h"
+#include "hw/ppc/pnv.h"
+#include "hw/ppc/pnv_xscom.h"
+#include "hw/ppc/pnv_n1_chiplet.h"
+#include "hw/ppc/pnv_nest_pervasive.h"
+
+/*
+ * The n1 chiplet contains chiplet control unit,
+ * PowerBus/RaceTrack/Bridge logic, nest Memory Management Unit(nMMU)
+ * and more.
+ *
+ * In this model Nest1 chiplet control registers are modelled via common
+ * nest pervasive model and few PowerBus racetrack registers are modelled.
+ */
+
+#define PB_SCOM_EQ0_HP_MODE2_CURR 0xe
+#define PB_SCOM_ES3_MODE 0x8a
+
+static uint64_t pnv_n1_chiplet_pb_scom_eq_read(void *opaque, hwaddr addr,
+ unsigned size)
+{
+ PnvN1Chiplet *n1_chiplet = PNV_N1_CHIPLET(opaque);
+ uint32_t reg = addr >> 3;
+ uint64_t val = ~0ull;
+
+ switch (reg) {
+ case PB_SCOM_EQ0_HP_MODE2_CURR:
+ val = n1_chiplet->eq[0].hp_mode2_curr;
+ break;
+ default:
+ qemu_log_mask(LOG_UNIMP, "%s: Invalid xscom read at 0x%" PRIx32 "\n",
+ __func__, reg);
+ }
+ return val;
+}
+
+static void pnv_n1_chiplet_pb_scom_eq_write(void *opaque, hwaddr addr,
+ uint64_t val, unsigned size)
+{
+ PnvN1Chiplet *n1_chiplet = PNV_N1_CHIPLET(opaque);
+ uint32_t reg = addr >> 3;
+
+ switch (reg) {
+ case PB_SCOM_EQ0_HP_MODE2_CURR:
+ n1_chiplet->eq[0].hp_mode2_curr = val;
+ break;
+ default:
+ qemu_log_mask(LOG_UNIMP, "%s: Invalid xscom write at 0x%" PRIx32 "\n",
+ __func__, reg);
+ }
+}
+
+static const MemoryRegionOps pnv_n1_chiplet_pb_scom_eq_ops = {
+ .read = pnv_n1_chiplet_pb_scom_eq_read,
+ .write = pnv_n1_chiplet_pb_scom_eq_write,
+ .valid.min_access_size = 8,
+ .valid.max_access_size = 8,
+ .impl.min_access_size = 8,
+ .impl.max_access_size = 8,
+ .endianness = DEVICE_BIG_ENDIAN,
+};
+
+static uint64_t pnv_n1_chiplet_pb_scom_es_read(void *opaque, hwaddr addr,
+ unsigned size)
+{
+ PnvN1Chiplet *n1_chiplet = PNV_N1_CHIPLET(opaque);
+ uint32_t reg = addr >> 3;
+ uint64_t val = ~0ull;
+
+ switch (reg) {
+ case PB_SCOM_ES3_MODE:
+ val = n1_chiplet->es[3].mode;
+ break;
+ default:
+ qemu_log_mask(LOG_UNIMP, "%s: Invalid xscom read at 0x%" PRIx32 "\n",
+ __func__, reg);
+ }
+ return val;
+}
+
+static void pnv_n1_chiplet_pb_scom_es_write(void *opaque, hwaddr addr,
+ uint64_t val, unsigned size)
+{
+ PnvN1Chiplet *n1_chiplet = PNV_N1_CHIPLET(opaque);
+ uint32_t reg = addr >> 3;
+
+ switch (reg) {
+ case PB_SCOM_ES3_MODE:
+ n1_chiplet->es[3].mode = val;
+ break;
+ default:
+ qemu_log_mask(LOG_UNIMP, "%s: Invalid xscom write at 0x%" PRIx32 "\n",
+ __func__, reg);
+ }
+}
+
+static const MemoryRegionOps pnv_n1_chiplet_pb_scom_es_ops = {
+ .read = pnv_n1_chiplet_pb_scom_es_read,
+ .write = pnv_n1_chiplet_pb_scom_es_write,
+ .valid.min_access_size = 8,
+ .valid.max_access_size = 8,
+ .impl.min_access_size = 8,
+ .impl.max_access_size = 8,
+ .endianness = DEVICE_BIG_ENDIAN,
+};
+
+static void pnv_n1_chiplet_realize(DeviceState *dev, Error **errp)
+{
+ PnvN1Chiplet *n1_chiplet = PNV_N1_CHIPLET(dev);
+
+ /* Realize nest pervasive common chiplet model */
+ if (!qdev_realize(DEVICE(&n1_chiplet->nest_pervasive), NULL, errp)) {
+ return;
+ }
+
+ /* Nest1 chiplet power bus EQ xscom region */
+ pnv_xscom_region_init(&n1_chiplet->xscom_pb_eq_mr, OBJECT(n1_chiplet),
+ &pnv_n1_chiplet_pb_scom_eq_ops, n1_chiplet,
+ "xscom-n1-chiplet-pb-scom-eq",
+ PNV10_XSCOM_N1_PB_SCOM_EQ_SIZE);
+
+ /* Nest1 chiplet power bus ES xscom region */
+ pnv_xscom_region_init(&n1_chiplet->xscom_pb_es_mr, OBJECT(n1_chiplet),
+ &pnv_n1_chiplet_pb_scom_es_ops, n1_chiplet,
+ "xscom-n1-chiplet-pb-scom-es",
+ PNV10_XSCOM_N1_PB_SCOM_ES_SIZE);
+}
+
+static void pnv_n1_chiplet_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->desc = "PowerNV n1 chiplet";
+ dc->realize = pnv_n1_chiplet_realize;
+}
+
+static void pnv_n1_chiplet_instance_init(Object *obj)
+{
+ PnvN1Chiplet *n1_chiplet = PNV_N1_CHIPLET(obj);
+
+ object_initialize_child(OBJECT(n1_chiplet), "nest-pervasive-common",
+ &n1_chiplet->nest_pervasive,
+ TYPE_PNV_NEST_CHIPLET_PERVASIVE);
+}
+
+static const TypeInfo pnv_n1_chiplet_info = {
+ .name = TYPE_PNV_N1_CHIPLET,
+ .parent = TYPE_DEVICE,
+ .instance_init = pnv_n1_chiplet_instance_init,
+ .instance_size = sizeof(PnvN1Chiplet),
+ .class_init = pnv_n1_chiplet_class_init,
+ .interfaces = (InterfaceInfo[]) {
+ { TYPE_PNV_XSCOM_INTERFACE },
+ { }
+ }
+};
+
+static void pnv_n1_chiplet_register_types(void)
+{
+ type_register_static(&pnv_n1_chiplet_info);
+}
+
+type_init(pnv_n1_chiplet_register_types);
@@ -52,6 +52,7 @@ ppc_ss.add(when: 'CONFIG_POWERNV', if_true: files(
'pnv_homer.c',
'pnv_pnor.c',
'pnv_nest_pervasive.c',
+ 'pnv_n1_chiplet.c',
))
# PowerPC 4xx boards
ppc_ss.add(when: 'CONFIG_PPC405', if_true: files(
The N1 chiplet handle the high speed i/o traffic over PCIe and others. The N1 chiplet consists of PowerBus Fabric controller, nest Memory Management Unit, chiplet control unit and more. This commit creates a N1 chiplet model and initialize and realize the pervasive chiplet model where chiplet control registers are implemented. This commit also implement the read/write method for the powerbus scom registers Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com> --- include/hw/ppc/pnv_n1_chiplet.h | 32 ++++++ include/hw/ppc/pnv_xscom.h | 6 ++ hw/ppc/pnv_n1_chiplet.c | 173 ++++++++++++++++++++++++++++++++ hw/ppc/meson.build | 1 + 4 files changed, 212 insertions(+) create mode 100644 include/hw/ppc/pnv_n1_chiplet.h create mode 100644 hw/ppc/pnv_n1_chiplet.c